parts needed for Delta Table Saw

"USENET READER" <[email protected]> wrote in message
news:R%[email protected]...
> I have an old Delta Table Saw, a Super 10 model 34-710. It is missing a
> blade guard support rod and the blade guard assembly itself. Delta has
> the blade guard in stock, but the support rod is no longer available.
>
> The part numbers are:
>
> Blade Guard Support Rod - 417-89-089-0002
> Blade Guard Assembly - 1087468
>
> If anyone has a saw with these part numbers, and wants to part with the
> parts, please contact me by removing the numbers from the e-mail addy

My blade guard on the Delta I own is just a black piece of all thread. Check
to see what the guard needs for attachment and go from there.

"USENET READER" <[email protected]> wrote in message
news:R%[email protected]...
>I have an old Delta Table Saw, a Super 10 model 34-710. It is missing a
>blade guard support rod and the blade guard assembly itself. Delta has the
>blade guard in stock, but the support rod is no longer available.
>
> The part numbers are:
>
> Blade Guard Support Rod - 417-89-089-0002
> Blade Guard Assembly - 1087468
>
> If anyone has a saw with these part numbers, and wants to part with the
> parts, please contact me by removing the numbers from the e-mail addy



If anything like my Craftsman TS it's just a long round steel stock you
could get from a hardware store. Have you tried ebay or Sears parts? Come to
think of it I don't remember anyone using factory bladeguards for years
including the woodworking gurus on TV - there must be a lot guards laying
around. Off course everyone should use bladeguards.

I did that - that is where I came up with the part number for the blade
guard support rod.

The same needs this rod to be attached to the motor base in order to
attach a blade guard/splitter.

SQLit wrote:

> "USENET READER" <[email protected]> wrote in message
> news:R%[email protected]...
>
>>I have an old Delta Table Saw, a Super 10 model 34-710. It is missing a
>>blade guard support rod and the blade guard assembly itself. Delta has
>>the blade guard in stock, but the support rod is no longer available.
>>
>>The part numbers are:
>>
>>Blade Guard Support Rod - 417-89-089-0002
>>Blade Guard Assembly - 1087468
>>
>>If anyone has a saw with these part numbers, and wants to part with the
>>parts, please contact me by removing the numbers from the e-mail addy
>
>
> My blade guard on the Delta I own is just a black piece of all thread. Check
> to see what the guard needs for attachment and go from there.
>
>