Has anyone built or does anyone know of any plans for building a dust
collection box for a RAS that I could hook up to my shop vac or (in the
future) a "real" dust collector? I have a factory "box" on my RAS but it
sticks too far out the back and the port is in the back so I have to keep it
at least a foot from the wall. I could probably slap something together
without plans but then I'd have to re-learn lessons that some of you have
probably already learned. I'd rather do it right the first time.
Thanks!
Kevin
"klklimes" <[email protected]> wrote in message
news:7OZ8f.492870$x96.169816@attbi_s72...
> Has anyone built or does anyone know of any plans for building a dust
> collection box for a RAS that I could hook up to my shop vac or (in the
> future) a "real" dust collector? I have a factory "box" on my RAS but it
> sticks too far out the back and the port is in the back so I have to keep
> it at least a foot from the wall. I could probably slap something together
> without plans but then I'd have to re-learn lessons that some of you have
> probably already learned. I'd rather do it right the first time.
>
Use the sheet metal force-air radiator fixtures from your heating
department. They feature openings at right angles or straight ahead.
You'll have to adapt down to a 4" for your DC, but they do as well as
anything you can put on a RAS.