Model: 22-790X - Assembling planer onto the mobile base
The installation instructions don't state whether the mobile base is
to be attached/secured to the planer unit, with screws or other means,
OR if the planer unit simply sits within the frame of the mobile
base. There are no extra screws for attaching the unit to the mobile
base.
The unit is heavy, so it may not need to be secured to the base, but I
would like to know for sure. Any help would be appreciated.
Thanks.
Sonny - finally getting around to this installation.
On Nov 20, 1:01=A0pm, Sonny <[email protected]> wrote:
> Model: 22-790X - Assembling planer onto the mobile base
Not familiar with the Delta mobile base but my 480 pound cabinet saw,
Jet 18" band saw , and my jointer simply set in their bases. They are
all heavy enough to stay stable. However, I have had to rock the
table saw up in its base a couple of times over the year and clean
packed sawdust from between the bottom of the saw and the mobile
base. It starts feeling "squishey" now and then and needs a little
cleaning. I don't know how the dust gets under there because it is
heavy.
I recently bought a Grizzly G0453 15" planer, and that self contained
base is great. It does sit back down a little heavily but I'm
catching on with technique.
RonB
> There should be no vibration so to speak, noise from the exhaust port wil=
l
> be considerable and especially when you turn on the dust collector. =A0Th=
e
> noise seems to bre greater than the sum of the two units.
My dust collection noise-makers are outside, so that helps. So, I
suppose there will be no more vibration than with the 8" jointer.
That's good to hear, also.
I haven't fired-up the planer, yet, as I'm still assembling it. Some
of the China-made bolts and nuts have stripped and I'll have to find
some replacements, re-tap and/or -die, then finish assembly. The self
tapping screws, for the dust port attachment, have stripped, also.
Beyond that, I'm not impressed with the infeed-outfeed table adjusting/
leveling, either. Some kind of fine-tuning adjuster, similar to a
turn buckle mechanism, should be on this size machine. I can make do,
though.
Sonny
"Sonny" <[email protected]> wrote in message
news:96ffd688-caa7-4b1c-af35-d86564e80f95@d20g2000yqg.googlegroups.com...
> There should be no vibration so to speak, noise from the exhaust port will
> be considerable and especially when you turn on the dust collector. The
> noise seems to bre greater than the sum of the two units.
My dust collection noise-makers are outside, so that helps. So, I
suppose there will be no more vibration than with the 8" jointer.
That's good to hear, also.
No IIRC the noise with the DC attached and running seems to pull the sound
out of the planer. The noise is at the planer, oddly enough. You'll see.
;~)
I haven't fired-up the planer, yet, as I'm still assembling it. Some
of the China-made bolts and nuts have stripped and I'll have to find
some replacements, re-tap and/or -die, then finish assembly. The self
tapping screws, for the dust port attachment, have stripped, also.
Beyond that, I'm not impressed with the infeed-outfeed table adjusting/
leveling, either. Some kind of fine-tuning adjuster, similar to a
turn buckle mechanism, should be on this size machine. I can make do,
though.
The planer is large enough that you don't really need the in feed and out
feed extensions. That said I too have those roller extensions, agree that
adjustment sucks, BUT as I said you really do not need them. Just get close
and use them to help support the wood as it goes in and out. I have never
regretted not adjusting them to perfection. I always try to run a whole
board through my planer, the boards that have splits on the ends. I always
cut the boards to length AFTER going through the planer therefore if there
is any snipe it gets cut off.
"Sonny" <[email protected]> wrote in message
news:f6465c3b-c499-48f5-9efc-14dfaf6f4648@f20g2000yqi.googlegroups.com...
> Thanks Mike & Leon. It was rational to just sit it in place, which I
> did, as no holes lined up for bolting it down. Metal on metal didn't
> agree with me, either, so I added cuttings (between the two) from a
> rubber mat, which might make it less noisy, if there would have been
> any vibration between the two. The matting should help muffle any
> vibration.
>
> I should have started drinking earlier, as I'm sure I would have
> realized how to assemble it, if I would have, but the LSU game hadn't
> started yet.
>
> Sonny
There should be no vibration so to speak, noise from the exhaust port will
be considerable and especially when you turn on the dust collector. The
noise seems to bre greater than the sum of the two units.
On Nov 20, 5:01=A0pm, Sonny <[email protected]> wrote:
> Thanks Mike & Leon. =A0It was rational to just sit it in place, which I
> did, as no holes lined up for bolting it down. =A0Metal on metal didn't
> agree with me, either, so I added cuttings (between the two) from a
> rubber mat, which might make it less noisy, if there would have been
> any vibration between the two. =A0The matting should help muffle any
> vibration.
>
> I should have started drinking earlier, as I'm sure I would have
> realized how to assemble it, if I would have, but the LSU game hadn't
> started yet.
>
> Sonny
Now there you go!
Keep tellin' my wife that I do my best thinking with a few beers.
She is way to smart for that story>
RonB
Thanks Mike & Leon. It was rational to just sit it in place, which I
did, as no holes lined up for bolting it down. Metal on metal didn't
agree with me, either, so I added cuttings (between the two) from a
rubber mat, which might make it less noisy, if there would have been
any vibration between the two. The matting should help muffle any
vibration.
I should have started drinking earlier, as I'm sure I would have
realized how to assemble it, if I would have, but the LSU game hadn't
started yet.
Sonny
"Sonny" <[email protected]> wrote in message
news:dd9ef35a-17a4-44a8-9631-3624418ecd80@k13g2000vbq.googlegroups.com...
> Model: 22-790X - Assembling planer onto the mobile base
>
> The installation instructions don't state whether the mobile base is
> to be attached/secured to the planer unit, with screws or other means,
> OR if the planer unit simply sits within the frame of the mobile
> base. There are no extra screws for attaching the unit to the mobile
> base.
>
> The unit is heavy, so it may not need to be secured to the base, but I
> would like to know for sure. Any help would be appreciated.
>
> Thanks.
> Sonny - finally getting around to this installation.
My 15" Delta sets in the mobile base. NONE of my mobile bases are attached
to the units that they carry except for the Laguna BS.
On 11/20/10 1:01 PM, Sonny wrote:
> Model: 22-790X - Assembling planer onto the mobile base
>
> The installation instructions don't state whether the mobile base is
> to be attached/secured to the planer unit, with screws or other means,
> OR if the planer unit simply sits within the frame of the mobile
> base. There are no extra screws for attaching the unit to the mobile
> base.
>
> The unit is heavy, so it may not need to be secured to the base, but I
> would like to know for sure. Any help would be appreciated.
>
> Thanks.
> Sonny - finally getting around to this installation.
I don't know what's supposed to happen according to spec, but I just
set mine on my generic mobile base and let gravity work. Seems a shame
to waste a perfectly good rolling workstation on a dedicated tool that
doesn't get used very often, like a miter say or drill, you know?
If you want, use some bolts and wing-nuts for temporary tie-down, the
stow away the planer on am out-of-the-way shelf until needed.
--
-MIKE-
"Playing is not something I do at night, it's my function in life"
--Elvin Jones (1927-2004)
--
http://mikedrums.com
[email protected]
---remove "DOT" ^^^^ to reply