I am looking for a plan that was published in the past but I can not
seem to located it. I know it is one of about 6 publications that I get
(I should trim that number back) thought is was WOOD, but it does not
show up in their index, which is quite nice to search, the other ones
are not so nice.
The workbench in question is on that has several convertible sections in
is so you can remove one section of the top and put a bunch of different
bench top tools in it. Like a tablesaw, miter box, drill press, or the
blank that just makes the top flat. Ring a bell for anyone?
Magizine name, yr/date/issue if any one can help, thanks
On Mon, 20 Mar 2006 14:12:19 -0600, Mike Coonrod <[email protected]> wrote:
>The workbench in question is on that has several convertible sections in
>is so you can remove one section of the top and put a bunch of different
>bench top tools in it.
http://christophermerrill.net/ww/plans/UTS/Tool_Stand_1.html
On Mon, 20 Mar 2006 23:47:09 +0000, Andy Dingley
<[email protected]> wrote:
>On Mon, 20 Mar 2006 14:12:19 -0600, Mike Coonrod <[email protected]> wrote:
>
>>The workbench in question is on that has several convertible sections in
>>is so you can remove one section of the top and put a bunch of different
>>bench top tools in it.
>
>http://christophermerrill.net/ww/plans/UTS/Tool_Stand_1.html
I built one of these with some of the variations you can find if you
look around the web. Unfortunately, I lost it in the flood after
Katrina (MDF REALLY likes brackish water!). I honestly don't know if
I'm going to make another one. As it turned out I didn't find it all
that useful. It was heavy and large though.
You can see the models I built for it at my site at
http://www.dubea.org/wood.html. I need to update the site with a
prologue of the results of the flood.
===========================================================================
Chris