I am working on a project. I need help finding some hard black plastic
tubing that has an inside diameter of 1/4". I am using it for a
spacer. I need the hard plastic for the strength. I thought about
using Pex tubing but I need to glue it to another piece of plastic and
all the glues and epoxy's I have read said not to use it with
Polypropylene.
Any help would be appreciated.
Thanks,
Bill
On Sun, 31 Dec 2006 10:41:05 -0500, Bill Davis Jr <[email protected]>
scribed:
>I am working on a project. I need help finding some hard black plastic
>tubing that has an inside diameter of 1/4". I am using it for a
>spacer. I need the hard plastic for the strength. I thought about
>using Pex tubing but I need to glue it to another piece of plastic and
>all the glues and epoxy's I have read said not to use it with
>Polypropylene.
>
>Any help would be appreciated.
>
>Thanks,
>
>Bill
Hey Bill:
Any electronics supply store should have this as they are spacers and
standoffs for circuit boards, electronic components and such. Try
Mouser (http://www.mouser.com/) or DigiKey (http://www.digikey.com/)
or even maybe your local RadioShack.
I think they come in different sizes .Also good stuff to have for
setting up your gutter's downspout standoffs and general home use.
Cheers,
Phred
"Bill Davis Jr" <[email protected]> wrote in message
news:[email protected]...
>I am working on a project. I need help finding some hard black plastic
> tubing that has an inside diameter of 1/4". I am using it for a
> spacer. I need the hard plastic for the strength. I thought about
> using Pex tubing but I need to glue it to another piece of plastic and
> all the glues and epoxy's I have read said not to use it with
> Polypropylene.
>
> Any help would be appreciated.
>
> Thanks,
>
> Bill
Do a search here,
http://www.mcmaster.com/