What do you use for sheet good storage? I have 15+ sheets up against
the wall (after a move). I'd like to store them in some moveable
way. My ceilings are 8'-1" so need to store lengthwise to the floor.
I've seen some roll-around carts with bins also that might be useful.
But looking to survey what has worked -or- not worked well for others.
Would like to be able to easily flip through the stock - see what's
there, and shuffle to get access to the one I want. Simple is best
IMO.
"coloradotrout" <[email protected]> wrote in message
news:acb077dd-159e-4f7d-a41b-379d5916d7d2@d21g2000vbm.googlegroups.com...
> What do you use for sheet good storage? I have 15+ sheets up against
> the wall (after a move). I'd like to store them in some moveable
> way. My ceilings are 8'-1" so need to store lengthwise to the floor.
> I've seen some roll-around carts with bins also that might be useful.
> But looking to survey what has worked -or- not worked well for others.
> Would like to be able to easily flip through the stock - see what's
> there, and shuffle to get access to the one I want. Simple is best
> IMO.
Why don't you make something like the carts at home depot? I have seen
storage like this in several shops out of both wood and metal. As far as
moving it around, that is simple. Just attach casters to the bottom. The
bigger (and more expensive) casters work much better than the little ones.
Especially if your floor is uneven or has cracks.
On Sep 16, 12:39 pm, coloradotrout <[email protected]> wrote:
> What do you use for sheet good storage? I have 15+ sheets up against
> the wall (after a move). I'd like to store them in some moveable
> way. My ceilings are 8'-1" so need to store lengthwise to the floor.
> I've seen some roll-around carts with bins also that might be useful.
> But looking to survey what has worked -or- not worked well for others.
> Would like to be able to easily flip through the stock - see what's
> there, and shuffle to get access to the one I want. Simple is best
> IMO.
Here's mine, made from scraps. http://www.tomeshew.spaces.live.com
They're in the workshop folder somewhere. An old solid core door for
the platform, a straight caster on each side, a swivel caster on each
end. Tom
coloradotrout wrote:
> What do you use for sheet good storage? I have 15+ sheets up against
> the wall (after a move). I'd like to store them in some moveable
> way. My ceilings are 8'-1" so need to store lengthwise to the floor.
> I've seen some roll-around carts with bins also that might be useful.
> But looking to survey what has worked -or- not worked well for others.
> Would like to be able to easily flip through the stock - see what's
> there, and shuffle to get access to the one I want. Simple is best
> IMO.
Have the same height ceilings as you. I built an 8" platform of 2 x 8 and
OSB next to one of my shop walls and store sheet goods there. Keeps them
off the concrete floor, provides a channel for my table saw dust collector
duct, and lets me flip through available sheet goods. It's about 18" deep.
<http://mklange.cnc.net/ShopPictures/Shop001.jpg> The plywood storage is
next to the wall behind the table saw. Not the best picture, but all I've
got of that area.
--
There is never a situation where having more rounds is a disadvantage
Rob Leatham
Bottom of the page
http://web.hypersurf.com/~charlie2/TheShop/PlyStorage.html
You always end up with half, quarter and odd size pieces
so having sevaral cubby holes for different sizes comes
in handy. Depth is 6' so you can have full sheets up right
on one end and long half sheets on the other.
If you leave about 2" of extra width in the full sheets bin
you can go through the sheets without having to pull
any out one at a time - unless of course it's a sheet of
birdseye maple.
"coloradotrout" wrote
: What do you use for sheet good storage? I have 15+ sheets up against
: the wall (after a move). I'd like to store them in some moveable
: way. My ceilings are 8'-1" so need to store lengthwise to the floor.
: I've seen some roll-around carts with bins also that might be useful.
: But looking to survey what has worked -or- not worked well for others.
: Would like to be able to easily flip through the stock - see what's
: there, and shuffle to get access to the one I want. Simple is best
: IMO.
I built one similar to this
http://www.shopnotes.com/issues/055/extras/roll-around-store-all/
I didn't put the bins on it and have sheet storage on both sides. I use
clamps to secure the sheets to the center frame to keep them from
warping and so far it's worked out well. Partial sheets get wedges at
the bottom to keep them in line.
I'm in the process of designing a panel cutting jig to add to it but that's
a ways off right now.
Art
On Sep 24, 11:27 am, Jack Stein <[email protected]> wrote:
> tom wrote:
> > Here's mine, made from scraps.http://www.tomeshew.spaces.live.com
> > They're in the workshop folder somewhere. An old solid core door for
> > the platform, a straight caster on each side, a swivel caster on each
> > end. Tom
>
> Tom, nice site. I particularly liked your ball rack and spectator chair...
>
> --
> Jack
> Using FREE News Server:http://www.eternal-september.org/http://jbstein.com
Thank you, Jack. The chair is not at all so red as in the photo! Tom
On Sep 16, 3:39=A0pm, coloradotrout <[email protected]> wrote:
> What do you use for sheet good storage? =A0I have 15+ sheets up against
> the wall (after a move). =A0I'd like to store them in some moveable
> way. =A0My ceilings are 8'-1" so need to store lengthwise to the floor.
> I've seen some roll-around carts with bins also that might be useful.
> But looking to survey what has worked -or- not worked well for others.
> Would like to be able to easily flip through the stock - see what's
> there, and shuffle to get access to the one I want. =A0 Simple is best
> IMO.
This might give you some ideas:
http://benchmark.20m.com/workshop/Jigs_Carts/Jigs_Carts.html
R
coloradotrout wrote:
> What do you use for sheet good storage? I have 15+ sheets up against
> the wall (after a move). I'd like to store them in some moveable
> way. My ceilings are 8'-1" so need to store lengthwise to the floor.
> I've seen some roll-around carts with bins also that might be useful.
> But looking to survey what has worked -or- not worked well for others.
> Would like to be able to easily flip through the stock - see what's
> there, and shuffle to get access to the one I want. Simple is best
> IMO.
Here are the wood storage cabinets I built:
http://www.flickr.com/photos/bbqboyee/sets/72157622392743628/
--
"Our beer goes through thousands of quality Czechs every day."
(From a Shiner Bock billboard I saw in Austin some years ago)
To reply, eat the taco.
http://www.flickr.com/photos/bbqboyee/
tom wrote:
> Here's mine, made from scraps. http://www.tomeshew.spaces.live.com
> They're in the workshop folder somewhere. An old solid core door for
> the platform, a straight caster on each side, a swivel caster on each
> end. Tom
Tom, nice site. I particularly liked your ball rack and spectator chair...
--
Jack
Using FREE News Server: http://www.eternal-september.org/
http://jbstein.com
On Wed, 16 Sep 2009 12:39:04 -0700 (PDT), coloradotrout
<[email protected]> wrote:
>What do you use for sheet good storage? I have 15+ sheets up against
>the wall (after a move). I'd like to store them in some moveable
>way. My ceilings are 8'-1" so need to store lengthwise to the floor.
>I've seen some roll-around carts with bins also that might be useful.
>But looking to survey what has worked -or- not worked well for others.
>Would like to be able to easily flip through the stock - see what's
>there, and shuffle to get access to the one I want. Simple is best
>IMO.
My sheetgoods are kept in a swing out rack, made from
1 sheet of ply cut on the diagonal and fastened to a 2x8 at the bottom
and side. I used 2 gate hinges in the side and one swivel rubber
wheel underneath. Plans in ShopNotes. But it wont hold 15 sheets,
maybe 6.
"coloradotrout" <[email protected]> wrote in message
news:acb077dd-159e-4f7d-a41b-379d5916d7d2@d21g2000vbm.googlegroups.com...
> What do you use for sheet good storage? I have 15+ sheets up against
> the wall (after a move). I'd like to store them in some moveable
> way. My ceilings are 8'-1" so need to store lengthwise to the floor.
> I've seen some roll-around carts with bins also that might be useful.
> But looking to survey what has worked -or- not worked well for others.
> Would like to be able to easily flip through the stock - see what's
> there, and shuffle to get access to the one I want. Simple is best
> IMO.
Keep in mind that storage on end or on edge is a good "temporary" solution
but if you are planing to store untill a project comes up you are going to
want to store the sheets the same way you see them when you buy them at the
yard, laying flat.
I have flat storate above my garage door hanging from the ceiling. BUT
that is only for excess overages from a project. I would not advise more
than 2 or 3, 3/4" sheets in that situation.