BLOODY CAMERAS

On Oct 11, 9:22=A0pm, [email protected] (JONBOY)
wrote:
> -------------------------------------
> hello you lot hope you can help me i have a couple of cameras that I NO
> ITS ODD ? but the cable that used to feed them is 4 core =3D a mini coax
> what i mean is the strands are red black orange brown then a very small
> coax all in one wire the brown and orange are the supply to the ray of
> infa reds round the lens thats fine + - the coax must be the video signal
> this may sound stupid i assume the red is + and black is - but i did appl=
y
> a 12 vdc regulated supply to one of the other ones exactly the same ones
> but it was not happy as it burn out not the orange and brown to the infa
> reds Now the back of my digi vid recorder the conections are as follows 4
> camera outs & 4 cams in then 2 type of monitor conetions depending on wha=
t
> you have then alarm realays are the why do you have a cam out and a cam i=
n
> because the cam out is not a 12 v dc supply they are bnc conetions also
> gots some other cams these are easy 12v dc into them auto infa reds at
> night and video out no problem with them can you get cams with in and out
> low voltage and seperate 12 vdc for the infa reds HELP ME AM GOING UCKING

Goodnight Jonboy

On Oct 11, 8:49=A0pm, -MIKE- <[email protected]> wrote:
> Try some half blind dovetails.
>
> --
>
> =A0 -MIKE-


Or four or five wet coats of boiled linseed oil. That'l fix 'em.

Ronb

Mark M wrote:
> ?
> My suggestion would be to finish grade school- particularly the part
> where they teach writing. Then, you could post something coherent
> and might elicit (that is like get) a response. My God man, did you
> even attend grade school?
>

It's a testimonial for California's Prop 19.

?
My suggestion would be to finish grade school- particularly the part where
they teach writing. Then, you could post something coherent and might
elicit (that is like get) a response. My God man, did you even attend grade
school?

MK

"JONBOY" <[email protected]> wrote in message
news:[email protected]...
>
>
>
> -------------------------------------
> hello you lot hope you can help me i have a couple of cameras that I NO
> ITS ODD ? but the cable that used to feed them is 4 core = a mini coax
> what i mean is the strands are red black orange brown then a very small
> coax all in one wire the brown and orange are the supply to the ray of
> infa reds round the lens thats fine + - the coax must be the video signal
> this may sound stupid i assume the red is + and black is - but i did apply
> a 12 vdc regulated supply to one of the other ones exactly the same ones
> but it was not happy as it burn out not the orange and brown to the infa
> reds Now the back of my digi vid recorder the conections are as follows 4
> camera outs & 4 cams in then 2 type of monitor conetions depending on what
> you have then alarm realays are the why do you have a cam out and a cam in
> because the cam out is not a 12 v dc supply they are bnc conetions also
> gots some other cams these are easy 12v dc into them auto infa reds at
> night and video out no problem with them can you get cams with in and out
> low voltage and seperate 12 vdc for the infa reds HELP ME AM GOING UCKING
>
>
>

Try some half blind dovetails.


--

-MIKE-

"Playing is not something I do at night, it's my function in life"
--Elvin Jones (1927-2004)
--
http://mikedrums.com
[email protected]
---remove "DOT" ^^^^ to reply

"JONBOY" <[email protected]> wrote in message
news:[email protected]...

Wet sand it.