>Those square holes on the ends of the deck
screws are supposed to rest parallel with the ground, aren't they? : )
Yes. Tests show up to 10% loss in holding power if oriented differently
in horizontal installations.
It has to do with magnetic equilibrium, and if not parallel, they can
actually unscrew themselves trying to equalize. Statiscally, an
equal number should try to screw themselves in tighter, but why
take the chance?
If you look carefully, some brands have some curvature approaching
the socket. This is to counteract variations in flux from the Earth's
curvature. In a vertical installation, the shank taper takes care of it.
Seems to have little effect, but the argument rages on.
>I am surprised how much the legs can still be manipulated. I plan to
next put on the long stretchers at the top, and then manipulate (maybe
using some rope), until I am satisfied, and then measure and cut and
install the other strechers.
Mine was also wobbly on the dry fit, but rock solid when I tightened
everything up.
I'd be happy to post some jpgs after I finish the trim glue-up tomorrow
as long as you promise not to whine about yEnc. They would be in
the binaries group.
--J
Probably not, probably someone who just decided to DO IT
instead of talk about it.
On 5/31/2012 11:40 PM, Bill wrote:
> Joe <Joe@Joe'sPlace.com wrote:
>> >Those square holes on the ends of the deck
>> screws are supposed to rest parallel with the ground, aren't they? : )
>>
>> Yes. Tests show up to 10% loss in holding power if oriented differently
>> in horizontal installations.
>> It has to do with magnetic equilibrium, and if not parallel, they can
>> actually unscrew themselves trying to equalize. Statiscally, an
>> equal number should try to screw themselves in tighter, but why
>> take the chance?
>> If you look carefully, some brands have some curvature approaching
>> the socket. This is to counteract variations in flux from the Earth's
>> curvature. In a vertical installation, the shank taper takes care of it.
>> Seems to have little effect, but the argument rages on.
>
>
> Is Joe a mechanical engineer or something like that?
>
> I'd be happy to post some jpgs after I finish the trim glue-up
> tomorrow as long as you promise not to whine about yEnc. They would
> be in
> the binaries group.
>
Well hell Joe - just don't encode it - problem solved.
--
-Mike-
[email protected]
On Thu, 31 May 2012 23:40:33 -0400, Bill <[email protected]> wrote:
>Joe <Joe@Joe'sPlace.com wrote:
>> >Those square holes on the ends of the deck
>> screws are supposed to rest parallel with the ground, aren't they? : )
>>
>> Yes. Tests show up to 10% loss in holding power if oriented differently
>> in horizontal installations.
>> It has to do with magnetic equilibrium, and if not parallel, they can
>> actually unscrew themselves trying to equalize. Statiscally, an
>> equal number should try to screw themselves in tighter, but why
>> take the chance?
>> If you look carefully, some brands have some curvature approaching
>> the socket. This is to counteract variations in flux from the Earth's
>> curvature. In a vertical installation, the shank taper takes care of it.
>> Seems to have little effect, but the argument rages on.
>
>
>Is Joe a mechanical engineer or something like that?
Naw, he's a chef, in'e? Owner of Joe's Morgue, Bar, and Grill.
"You stab 'em, we slab 'em. You kill 'em, we grill 'em."
--
In reality, serendipity accounts for one percent of the blessings
we receive in life, work and love. The other 99 percent is due to
our efforts.
-- Peter McWilliams
On 5/31/2012 10:07 PM, Mike Marlow wrote:
>>
>> I'd be happy to post some jpgs after I finish the trim glue-up
>> tomorrow as long as you promise not to whine about yEnc. They would
>> be in
>> the binaries group.
>>
>
> Well hell Joe - just don't encode it - problem solved.
He either does not know HOW to leave it unencoded, or he refuses. He already
had about twenty people tell him that they weren't going to bother looking at
any yEnc encoded images, but instead of bowing to the wishes of the
overwhelming majority he just acted like a stubborn jackass. A trend which
continues I see.
--
"Our beer goes through thousands of quality Czechs every day."
(From a Shiner Bock billboard I saw in Austin some years ago)
To reply, eat the taco.
http://www.flickr.com/photos/bbqboyee/
Joe <Joe@Joe'sPlace.com wrote:
> >Those square holes on the ends of the deck
> screws are supposed to rest parallel with the ground, aren't they? : )
>
> Yes. Tests show up to 10% loss in holding power if oriented differently
> in horizontal installations.
> It has to do with magnetic equilibrium, and if not parallel, they can
> actually unscrew themselves trying to equalize. Statiscally, an
> equal number should try to screw themselves in tighter, but why
> take the chance?
> If you look carefully, some brands have some curvature approaching
> the socket. This is to counteract variations in flux from the Earth's
> curvature. In a vertical installation, the shank taper takes care of it.
> Seems to have little effect, but the argument rages on.
Is Joe a mechanical engineer or something like that?