In article <[email protected]>, <Brian> wrote:
>I'm considering putting a brass foot rail on a round, 68" diameter, poker
>table. What distance in from the edge should the foot rail be?
One "obvious" answer is "two feet, per player".
<Brian> wrote in message
news:[email protected]...
> I'm considering putting a brass foot rail on a round, 68" diameter, poker
> table. What distance in from the edge should the foot rail be?
I'd suggest you research the average foot size for males (sorry ladies) and
allow enough space for a the middle of a foot to rest on the rail without
hitting the wood in front of it. Either that or just go into some bar and
measure the distance that they use.
On Fri, 18 Feb 2005 01:22:26 +1100, <Brian> wrote:
>I'm considering putting a brass foot rail on a round, 68" diameter, poker
>table. What distance in from the edge should the foot rail be?
You might check online for a hardware supplier that carries the rail.
Or check with your supplier if you're buying the rail locally. Most
also carry the brass brackets that mount to a bar (in your case the
table) and sometimes also have a leg that goes to the floor. They
should be able to give you the measurements of the bracket.
Mike O.
Thu, Feb 17, 2005, 11:39am (EST-1) [email protected] (Swingman) says:
Ah yes ... the immininently justifiable "research and fact gathering"
trip.
Yes, an absolutely horrible thing to to do, trying to get someone
to think for themself.
JOAT
Intellectual brilliance is no guarantee against being dead wrong.
- David Fasold