gG

[email protected] (Glenna Rose)

27/01/2005 8:24 PM

Re: Chalkboard

[email protected] writes:
>Hey yo all. I'm thinking of making some chalkboards. A few Q's.
>
>1. Does anyone sell chalkboard surfaced ply/mdf/whatever?
>2. I know that chalkboard paint is available but I'm concerned that I
>wouldn't get it as smooth. Even so, anyone know who sells it? Any tips
>such as best substrate, best application method, etc?

Some of today's materials were not available when I made several for our
children so I used pressed hardboard, which was probably Masonite at the
time. There was no problem with it being smooth, but then the paint was
freshly shaken from the paint store, even though I used a brush to apply
it.

Are you sure you want a chalkboard rather than a dryboard? With chalk
there is no dry marker smell, but with a dry marker there is no dust;
potential allergies may be a factor. Chalk doesn't dry out, but dry
markers don't break when dropped (usually <g>)

If your situation is one where you can use both sides, you might have one
of each?

Glenna


This topic has 1 replies

Sb

"SonomaProducts.com"

in reply to [email protected] (Glenna Rose) on 27/01/2005 8:24 PM

28/01/2005 10:33 AM

I'm putting together inventory for some Country Crap eerrrhh I mean
Craft fairs and the retro chalk boards with some cutsie Pine frames is
what I'm considering so the white board would just be out of place.

I am having some fun learning some faux finishing techniques. Also
after setting aside my pride, it is a lot of fun to attack a newly mad
Pine cabinet with a belt sander loaded with 80 grit, a screw driver and
a claw hammer. Maybe someday I'll get the guts to try that on a QS Wht
Oak living room set...not.

My finest faux painting technique so far has been to unleash my 11 year
old daughter with some watered down flat latex, $5 a gallon at Wal Mart.


You’ve reached the end of replies