Hello all.
I want to create a few presentation awards for fellow thespians and
need a way to write on the wood words along the lines of "Presented to
...."
My penmanship has degraded further from it's sorry state pre computers
with the advent of the laser printer, so I doubt I would be happy with
burning the text freehand using the pyrography tools I've seen.
Further, I don't need to burn the text on there as long as it can be
seen and read once hung on the wall.
Short of getting someone more skilled than I to do it or affixing a
brass plate, what are my options?
TIA
Mekon
"Mekon" <[email protected]> wrote in message
news:[email protected]...
> Hello all.
>
> I want to create a few presentation awards for fellow thespians and need a
> way to write on the wood words along the lines of "Presented to ...."
>
> My penmanship has degraded further from it's sorry state pre computers
> with the advent of the laser printer, so I doubt I would be happy with
> burning the text freehand using the pyrography tools I've seen.
> Further, I don't need to burn the text on there as long as it can be seen
> and read once hung on the wall.
>
> Short of getting someone more skilled than I to do it or affixing a brass
> plate, what are my options?
>
> TIA
>
> Mekon
>
>
You can also use a printer to print your text, pierce it with a needle for
an outline and then
take a finer dremel or flex-shaft bit and indent the writing. Label strips
also work well.
I prefer a stippling technique for this and, if done carefully, the results
can be more graphically impressive than pyrography. For an added touch, you
can paint the wood for contrast before doing the engraving.
Regards,
Edward he
<[email protected]> wrote:
> The previous responses can't be correct, because they don't involve
getting
> new tools or machinery.
>
> Why not get a nice pantograph
If that is the way you want to go, then a CNC controlled New Hermes is
the gold standard.
Lew
You might consider taking it to a sign maker and having them paint it on, or
a pinstripe artist.
Kate
"Mekon" <[email protected]> wrote in message
news:[email protected]...
Lew Hodgett wrote on Monday :
> "Mekon" wrote:
>
>
>> I want to create a few presentation awards for fellow thespians and need
>> a
>> way to write on the wood words along the lines of "Presented to ....".
> <snip>
>
> Makes a good scrool saw project.
>
> Lew
Writing 20 words four times with a scroll saw? I'd be dead before I
finished! :)
Mekon
"Mekon" wrote...
=20
> I want to create a few presentation awards for fellow thespians and=20
> need a way to write on the wood words along the lines of "Presented to =
> ...."
The previous responses can't be correct, because they don't involve =
getting new tools or machinery.
Why not get a nice pantograph - make one template, then rout them all =
out. Save the template for future use. Here's the pantograph setup I =
use:
http://www.tjwoodworking.com/IMGP0665.jpg
http://www.tjwoodworking.com/IMGP0667.jpg
HTH
--=20
Timothy Juvenal
www.tjwoodworking.com
Mekon <[email protected]> writes:
> Short of getting someone more skilled than I to do it or affixing a
> brass plate, what are my options?
You can use a laser printer to print a mirror image, and iron it on the wood.
You can then use this as a guide - and trace the ink with a burning pen.
On Mon, 22 Oct 2007 10:29:08 GMT, Mekon
<[email protected]> wrote:
>Lew Hodgett wrote on Monday :
>> "Mekon" wrote:
>>
>>
>>> I want to create a few presentation awards for fellow thespians and need a
>>> way to write on the wood words along the lines of "Presented to ....".
>> <snip>
>>
>> Makes a good scrool saw project.
>>
>> Lew
>
>Writing 20 words four times with a scroll saw? I'd be dead before I
>finished! :)
>
>Mekon
>
Depends on how thick they need to be. If the wood is 1/2 inch thick or
less, you can stack cut four of them and only cut once. Of course,
that assumes you already have the saw.
Bob McConnell
N2SPP
Lew Hodgett wrote on Monday :
> "Mekon" wrote:
>
>
>> I want to create a few presentation awards for fellow thespians and need a
>> way to write on the wood words along the lines of "Presented to ....".
> <snip>
>
> Makes a good scrool saw project.
>
> Lew
Writing 20 words four times with a scroll saw? I'd be dead before I
finished! :)
Mekon
Mon, Oct 22, 2007, 10:29am (EDT+4) [email protected]
(Mekon) doth sayeth:
Writing 20 words four times with a scroll saw? I'd be dead before I
finished! :)
If you're gonna repeat the same thing over and over, or just want
to burn your logo or whatever, no prob. Make a branding iron. No
biggie. You need a piece of brass about 1/8 thick. (hobby shop) ferric
chloride eching solution (radio shack) paint and small brush or a felt
marker. Paint, or draw, the design on the brass backwards. drop in
echant until thel design is raised quite a bit. Then wash it with water.
and remove the paint. (NOTE: I have NOT done this; however, I have used
a similar [or the same] etching solution to etch glass [for glass it is
a paste, apply with a small brush], using stencils. Wear rubber gloves
[don't forget and scratch your nose or rub your ear], rinse under cold
running water, use common sense; just remember, this is at your own
risk. You can use a large electric soldering iron for heat - braze, or
silver solder, the branding iron on. Or afix to a steel rod, and head
with a propane torch. I'd say put a wooden handle on. No biggie. If I
ever change my mind about just gluing a business card on the bottom or
inside of whatever, I'll make one for myself. If I run across a piece
of brass, may just make one anyway.
JOAT
"I'm an Igor, thur. We don't athk quethtionth."
"Really? Why not?"
"I don't know, thur. I didn't athk."
[email protected] (J T) wrote in
news:[email protected]:
> Mon, Oct 22, 2007, 10:29am (EDT+4) [email protected]
> (Mekon) doth sayeth:
> Writing 20 words four times with a scroll saw? I'd be dead before I
> finished! :)
>
> If you're gonna repeat the same thing over and over, or just want
> to burn your logo or whatever, no prob. Make a branding iron. No
> biggie. You need a piece of brass about 1/8 thick. (hobby shop)
> ferric chloride eching solution (radio shack) paint and small brush or
> a felt marker. Paint, or draw, the design on the brass backwards.
> drop in echant until thel design is raised quite a bit. Then wash it
> with water. and remove the paint. (NOTE: I have NOT done this;
> however, I have used a similar [or the same] etching solution to etch
> glass [for glass it is a paste, apply with a small brush], using
> stencils. Wear rubber gloves [don't forget and scratch your nose or
> rub your ear], rinse under cold running water, use common sense; just
> remember, this is at your own risk. You can use a large electric
> soldering iron for heat - braze, or silver solder, the branding iron
> on. Or afix to a steel rod, and head with a propane torch. I'd say
> put a wooden handle on. No biggie. If I ever change my mind about
> just gluing a business card on the bottom or inside of whatever, I'll
> make one for myself. If I run across a piece of brass, may just make
> one anyway.
>
>
>
> JOAT
I have done something extremely similar to this... etching my own PC
board. (In fact, I'm preparing to make a few more. It's not the 20
minutes in the etchant that's important, it's the 120 minutes spent
preparing that are!)
Ferric Chloride is something to read up on before you do anything with
it. It stains fast and permanent, and I'd never use it in a container
that would ever be used for food, even after a thorough cleaning. It
will etch away metals quite readily, and it seems to me there's
something about glass... If you take the time to read up on Ferric
Chloride (take a look at some of the PC board making sites), you can
handle it safely and effectively.
With the method JOAT described, you may run in to problems with the
etchant eating around your paint. I don't have a solution for this, but
maybe someone else does.
Puckdropper
--
Wise is the man who attempts to answer his question before asking it.
To email me directly, send a message to puckdropper (at) fastmail.fm
Wed, Oct 24, 2007, 8:28am (EDT+4) [email protected] (Puckdropper)
doth sayeth:
<snip> you may run in to problems with the etchant eating around your
paint. I don't have a solution for this, but maybe someone else does.
The last time I etched anything was 50+ years ago. Used some type
of tar, I believe, and etched a nicely intricate stag, in a large
aluminum tray. Didn't eat around the "tar", and came out great. But,
if I try this, and I believe I will, my answer to it eating around the
paint, would be that I would be willing to make more than one, to get a
good one.
Which got me to thinking. I know I said brass, but that's something
I read. Don't know when I'd come across some brass, but already have
some steel pieces. I'm thinking that would work as well as brass. Hmm,
now just gotta think of a design I'd want, then get me some etching
stuff.
JOAT
It's not hard, if you get your mind right.
- Granny Weatherwax
J T was thinking very hard :
> Mon, Oct 22, 2007, 10:29am (EDT+4) [email protected]
> (Mekon) doth sayeth:
> Writing 20 words four times with a scroll saw? I'd be dead before I
> finished! :)
>
> If you're gonna repeat the same thing over and over, or just want
> to burn your logo or whatever, no prob. Make a branding iron. No
> biggie. You need a piece of brass about 1/8 thick. (hobby shop) ferric
> chloride eching solution (radio shack) paint and small brush or a felt
> marker. Paint, or draw, the design on the brass backwards. drop in
> echant until thel design is raised quite a bit. Then wash it with water.
> and remove the paint. (NOTE: I have NOT done this; however, I have used
> a similar [or the same] etching solution to etch glass [for glass it is
> a paste, apply with a small brush], using stencils. Wear rubber gloves
> [don't forget and scratch your nose or rub your ear], rinse under cold
> running water, use common sense; just remember, this is at your own
> risk. You can use a large electric soldering iron for heat - braze, or
> silver solder, the branding iron on. Or afix to a steel rod, and head
> with a propane torch. I'd say put a wooden handle on. No biggie. If I
> ever change my mind about just gluing a business card on the bottom or
> inside of whatever, I'll make one for myself. If I run across a piece
> of brass, may just make one anyway.
>
Thanks for that,
I'll look ino it
Mekon
After serious thinking Maxwell Lol wrote :
> Mekon <[email protected]> writes:
>
>> Short of getting someone more skilled than I to do it or affixing a
>> brass plate, what are my options?
>
> You can use a laser printer to print a mirror image, and iron it on the wood.
> You can then use this as a guide - and trace the ink with a burning pen.
That's a neat idea, thanks! :)
Mekon
VibraJet submitted this idea :
> "Mekon" wrote...
>
>> I want to create a few presentation awards for fellow thespians and
>> need a way to write on the wood words along the lines of "Presented to
>> ...."
>
>
> The previous responses can't be correct, because they don't involve getting
> new tools or machinery.
>
> Why not get a nice pantograph - make one template, then rout them all out.
> Save the template for future use. Here's the pantograph setup I use:
>
> http://www.tjwoodworking.com/IMGP0665.jpg
>
> http://www.tjwoodworking.com/IMGP0667.jpg
>
> HTH
ROFL!
:)
Mekon
Nova brought next idea :
> Mekon wrote:
>> Hello all.
>>
>> I want to create a few presentation awards for fellow thespians and need a
>> way to write on the wood words along the lines of "Presented to ....."
>>
>> My penmanship has degraded further from it's sorry state pre computers
>> with the advent of the laser printer, so I doubt I would be happy with
>> burning the text freehand using the pyrography tools I've seen.
>> Further, I don't need to burn the text on there as long as it can be seen
>> and read once hung on the wall.
>>
>> Short of getting someone more skilled than I to do it or affixing a brass
>> plate, what are my options?
>>
>> TIA
>>
>> Mekon
>>
>>
>
> Have you thought about using a laser engraving service?
no, not really, I wanted to do it myself.
Mekon
I have never been all that impressed with wood burning, mine or
others.
Laser etching is impressive, but I know you want to do your own
thing and maybe you want to buy new tools. Here is an idea:
Stop at a local head stone company. Buy a small piece of bounce
sheet. Cut your design and writing out of the sheet. Talk it
over with the sand blaster at the headstone outfit about digging
the letters or digging the background. See what he would charge
for doing the sandblasting or buy a small harbor freight set and
compressor.
--
______________________________
Keep the whole world singing . . . .
DanG (remove the sevens)
[email protected]
"Mekon" <[email protected]> wrote in message
news:[email protected]...
> Hello all.
>
> I want to create a few presentation awards for fellow thespians
> and need a way to write on the wood words along the lines of
> "Presented to ...."
>
> My penmanship has degraded further from it's sorry state pre
> computers with the advent of the laser printer, so I doubt I
> would be happy with burning the text freehand using the
> pyrography tools I've seen.
> Further, I don't need to burn the text on there as long as it
> can be seen and read once hung on the wall.
>
> Short of getting someone more skilled than I to do it or
> affixing a brass plate, what are my options?
>
> TIA
>
> Mekon
>
>
Sat, Oct 27, 2007, 8:37am (EDT-1) [email protected] (DanG) doth sayeth:
<snip> Stop at a local head stone company. Buy a small piece of bounce
sheet. Cut your design and writing out of the sheet. Talk it over with
the sand blaster at the headstone outfit about digging the letters or
digging the background. See what he would charge for doing the
sandblasting or buy a small harbor freight set and compressor.
I can't see that working with the small letters you'd want on a
brand. Not unless you wanted your letters 2-3+ inches tall. Want to
explain, or you just tossing that out there?
JOAT
It's not hard, if you get your mind right.
- Granny Weatherwax
Show off!
*grin*
Kate
"VibraJet" <[email protected]> wrote in message
news:[email protected]...
"Mekon" wrote...
> I want to create a few presentation awards for fellow thespians and
> need a way to write on the wood words along the lines of "Presented to
> ...."
The previous responses can't be correct, because they don't involve getting
new tools or machinery.
Why not get a nice pantograph - make one template, then rout them all out.
Save the template for future use. Here's the pantograph setup I use:
http://www.tjwoodworking.com/IMGP0665.jpg
http://www.tjwoodworking.com/IMGP0667.jpg
HTH
--
Timothy Juvenal
www.tjwoodworking.com
On Mon, 22 Oct 2007 07:21:19 GMT, Mekon <[email protected]> wrote:
>Hello all.
>
>I want to create a few presentation awards for fellow thespians and
>need a way to write on the wood words along the lines of "Presented to
>...."
>
>My penmanship has degraded further from it's sorry state pre computers
>with the advent of the laser printer, so I doubt I would be happy with
>burning the text freehand using the pyrography tools I've seen.
>Further, I don't need to burn the text on there as long as it can be
>seen and read once hung on the wall.
>
>Short of getting someone more skilled than I to do it or affixing a
>brass plate, what are my options?
>
>TIA
>
>Mekon
>
Got a Dremel?
make a template with a kid's plastic stencil kit and rout it with the Dremel..
If you're handy (pun intended) you can print the sentence on paper and trace
over it with a stylus or hard pencil, then rout or burn it..
mac
Please remove splinters before emailing
Mekon wrote:
> Hello all.
>
> I want to create a few presentation awards for fellow thespians and need
> a way to write on the wood words along the lines of "Presented to ....."
>
> My penmanship has degraded further from it's sorry state pre computers
> with the advent of the laser printer, so I doubt I would be happy with
> burning the text freehand using the pyrography tools I've seen.
> Further, I don't need to burn the text on there as long as it can be
> seen and read once hung on the wall.
>
> Short of getting someone more skilled than I to do it or affixing a
> brass plate, what are my options?
>
> TIA
>
> Mekon
>
>
Have you thought about using a laser engraving service?
--
Jack Novak
Buffalo, NY - USA
[email protected]