On Dec 9, 10:59 am, zap <[email protected]> wrote:
> Hi All,
>
> I am having a rash on both arms after forming model parts by sanding
> Red Oak. It possibly is a reaction to the very fine dust.
>
> I used a dust mask but didn't think about exposed skin.
>
> Has anyone else had such a problem of a reaction to Red Oak??
>
> Zap
As stated by others, everybody's different. I could probably eat red
oak dust without any complications. For me, black walnut is an
irritant. Unfortunately, I love black walnut and I'm indifferent to
red oak. And so it goes...
Jeff
On Dec 9, 10:59 am, zap <[email protected]> wrote:
> Hi All,
>
> I am having a rash on both arms after forming model parts by sanding
> Red Oak. It possibly is a reaction to the very fine dust.
>
> I used a dust mask but didn't think about exposed skin.
>
> Has anyone else had such a problem of a reaction to Red Oak??
>
> Zap
Almost any wood when reduced to fine dust can irritate. Keep your arms
and other body parts covered, wash your clothing separately, and
shower well immediately after working with any wood when you're
sanding or otherwise creating fine dust. The dust mask is essential--I
hate 'em, but use them--and goggles are a help, too, to prevent eye
irritation.
Red oak doesn't bother me, but mahogany has put me in the emergency
room. I had been sensitized a day earlier, when I got something on the
order of seven yellowjacket stings (do NOT step in a yellowjacket
nest: it really pisses the little buggers off. I was lucky it was only
seven stings, but two evenings later, that entire tribe vanished).
My stepfather had all kinds of problems with red oak sanding and sawdust. He
got rashes and had severe breathing problems from working with it. Then he
tried burning some in the fireplace and the smoke put him in the emergency
room.
I don't have any problem with it and am very grateful that I don't, but I
have all kinds of other allergies. Some of us are more sensitive to certain
things than others.
Charley
"zap" <[email protected]> wrote in message
news:08390965-e8d4-49b7-a872-3c81fa96415d@e23g2000prf.googlegroups.com...
> Hi All,
>
> I am having a rash on both arms after forming model parts by sanding
> Red Oak. It possibly is a reaction to the very fine dust.
>
> I used a dust mask but didn't think about exposed skin.
>
> Has anyone else had such a problem of a reaction to Red Oak??
>
> Zap
And use a shop vac attached to your sander to collect as much of the dust as
possible from the sander so most of it stays off of you.
Charley
"zap" <[email protected]> wrote in message
news:[email protected]...
> On Dec 9, 6:03 pm, DS <[email protected]> wrote:
> > zap wrote:
> > > Hi All,
> >
> > > I am having a rash on both arms after forming model parts by sanding
> > > Red Oak. It possibly is a reaction to the very fine dust.
> >
> > > I used a dust mask but didn't think about exposed skin.
> >
> > > Has anyone else had such a problem of a reaction to Red Oak??
> >
> > Not red oak, my problem is with Red Maple (Acer rubrum). I can't sand
> > the stuff without getting skin rash and lung inflammation. Nasty stuff
> > to me.
> > If you're having skin problems with red oak, I'd strongly suggest you
> > wear a good quality dust mask, or even a respirator. I've had good luck
> > with this
model:http://woodcraft.com/family.aspx?familyid=20033&mode=details#tabs
> >
> > -- Krusty the Clown
>
> Thank you all for your answers, It tells me that I am on the right
> track with what I believe happened to me after working with Red Oak
> fine dust. I certainly will take more precautions in the future.
> Washing off right after making all that dust, wearing clothing that
> will protect my bare skin as much as possible..
>
> Zap
zap wrote:
> Hi All,
>
> I am having a rash on both arms after forming model parts by sanding
> Red Oak. It possibly is a reaction to the very fine dust.
>
> I used a dust mask but didn't think about exposed skin.
>
> Has anyone else had such a problem of a reaction to Red Oak??
Not red oak, my problem is with Red Maple (Acer rubrum). I can't sand
the stuff without getting skin rash and lung inflammation. Nasty stuff
to me.
If you're having skin problems with red oak, I'd strongly suggest you
wear a good quality dust mask, or even a respirator. I've had good luck
with this model:
http://woodcraft.com/family.aspx?familyid=20033&mode=details#tabs
--
"Hey, yutz! Guns aren't toys.
They're for family protection, hunting dangerous or delicious animals,
and keeping the King of England out of your face."
-- Krusty the Clown
"zap" <[email protected]> wrote in message
news:08390965-e8d4-49b7-a872-3c81fa96415d@e23g2000prf.googlegroups.com...
> Hi All,
>
> I am having a rash on both arms after forming model parts by sanding
> Red Oak. It possibly is a reaction to the very fine dust.
>
> I used a dust mask but didn't think about exposed skin.
>
> Has anyone else had such a problem of a reaction to Red Oak??
>
Tannins and other lovelies can irritate. Especially if you're sweating.
Protect yourself.
"zap" <[email protected]> wrote in message
news:08390965-e8d4-49b7-a872-3c81fa96415d@e23g2000prf.googlegroups.com...
Hi All,
I am having a rash on both arms after forming model parts by sanding
Red Oak. It possibly is a reaction to the very fine dust.
I used a dust mask but didn't think about exposed skin.
Has anyone else had such a problem of a reaction to Red Oak??
Zap
--
When we refinished the floors in our last house my hubby developed an
allergy to it.
They were both red and white oak.
His eyes swelled shut and the creases in his eyelids became raw and weeping
within the course of just a couple of hours.
His whole face puffed up and he was itchy in places he couldn't reach to
scratch.
luckily a couple of Benedryl cleared it up for him but it took his eye lids
a few days to heal.
Yep, he was wearing a dust mask and eye protection and I was the one running
the sander.
These days, we avoid oak for this very reason. It must be something in the
tanins.
We did find out that if he immediately rinsed his face and exposed parts
after getting dust on himself, his reaction was considerably less severe.
Good luck to you!
Kate
On Dec 9, 6:03 pm, DS <[email protected]> wrote:
> zap wrote:
> > Hi All,
>
> > I am having a rash on both arms after forming model parts by sanding
> > Red Oak. It possibly is a reaction to the very fine dust.
>
> > I used a dust mask but didn't think about exposed skin.
>
> > Has anyone else had such a problem of a reaction to Red Oak??
>
> Not red oak, my problem is with Red Maple (Acer rubrum). I can't sand
> the stuff without getting skin rash and lung inflammation. Nasty stuff
> to me.
> If you're having skin problems with red oak, I'd strongly suggest you
> wear a good quality dust mask, or even a respirator. I've had good luck
> with this model:http://woodcraft.com/family.aspx?familyid=20033&mode=details#tabs
>
> -- Krusty the Clown
Thank you all for your answers, It tells me that I am on the right
track with what I believe happened to me after working with Red Oak
fine dust. I certainly will take more precautions in the future.
Washing off right after making all that dust, wearing clothing that
will protect my bare skin as much as possible..
Zap
zap wrote:
> Hi All,
>
> I am having a rash on both arms after forming model parts by sanding
> Red Oak. It possibly is a reaction to the very fine dust.
>
> I used a dust mask but didn't think about exposed skin.
>
> Has anyone else had such a problem of a reaction to Red Oak??
I'm sure _somebody_ has... :)
Personally though, no, oak (red nor white) has ever been a dermatitis
problem for me. Everybody's different. I have gotten into some
mill-run green oak that had had poison oak growing on it and got a heck
of a case while stacking it...
--