I have a Lee Valley slatwall bit, but can't find anywhere a dimension
of how deep the cutter should be set in 3/4" material.
The bit (and slot dimensions) are here:
<http://www.leevalley.com/wood/page.aspx?c=2&p=51594&cat=1,46168,46176&ap=1>
, if link doesn't work just search for "Slot-Wall Bit"
My question for someone that has some 3/4" slatwall is: what is the
depth from the bottom of the wider slot to the face of the panel? It
looks like the bigger slot is centered but if I am wrong the hangers
will not fit properly.
Thanks,
Bert
Bert wrote:
> I have a Lee Valley slatwall bit, but can't find anywhere a dimension
> of how deep the cutter should be set in 3/4" material.
>
> The bit (and slot dimensions) are here:
> <http://www.leevalley.com/wood/page.aspx?c=2&p=51594&cat=1,46168,46176&ap=1>
> , if link doesn't work just search for "Slot-Wall Bit"
>
> My question for someone that has some 3/4" slatwall is: what is the
> depth from the bottom of the wider slot to the face of the panel? It
> looks like the bigger slot is centered but if I am wrong the hangers
> will not fit properly.
>
> Thanks,
> Bert
>
1/2 "