LeeValley has a good selection of hardware.... and tools
http://www.leevalley.com/US/Hardware/Index.aspx
On Friday, September 20, 2013 12:31:13 AM UTC-4, [email protected] wrote:
> Earlier this year I bought some 1/2" partial wrap around hinges for
>
> 1/2" full inset doors. Now I need more and all I can find are for 3/4"
>
> doors. Any suggestions?
>
>
>
> Rob
On Sat, 21 Sep 2013 06:59:08 -0400, "Mike Marlow"
<[email protected]> wrote:
>[email protected] wrote:
>
>> Mike, at the risk of sounding ungratefull, the search that you
>> suggested was exactly the search that I used, and it appears that
>> there are tons of hinges, however when you click on the links you will
>> find that they are links to hinges for 3/4" doors. This is another
>> case of Google providing bad information. It appears the the google
>> search engine is ignoring the 1/2" portion of the search.
>>
>
>Must be a localization thing with google or something. I just used the
>exact same search string again, and one of the first returns was this site.
>
>http://www.hardwaresource.com/hinges/CABINET+HINGES/Overlay+Hinges%2C+Wrap+Around+-+Partial+Inset+Hinges/Overlay+Hinges%2C+Partial+Wrap
>
>Take a look - all different sizes.
Thanks Mike, I guess I didn't accurately say what I am looking for.
What I need is a partial wrap hinge for a 1/2" thick full inset door.
On 9/21/2013 10:40 PM, [email protected] wrote:
> On Sat, 21 Sep 2013 22:11:35 -0400, woodchucker <[email protected]>
>> I have to agree about ignoring the 1/2, although Mike's followup is good
>> info. I have noticed that google has become less selective and tries to
>> offer you something that might be close. Seems like google has taken a
>> step back.. When google first came out there engine was dead on pinpoint
>> accurate, while yahoo and excite were like google today. I miss the old
>> google.
>
> That might well be because there's so many more websites available now
> as compared to when Google first came out.
>
> I frequently find myself putting quotation marks around my query words
> in order to narrow down the searches to exact phrases.
>
I wish that were the truth, but the search engine has evolved over time
with them. They push the sites that pay first. They used to push the
most frequently visited sites. They also have tried figuring out what
you might be wanting, not what you are wanting. Some of this seems to be
based on your search history, and geographic location.
It is still a good search engine, but it has lost some of hits accuracy.
--
Jeff
In article <[email protected]>, [email protected]
says...
> Earlier this year I bought some 1/2" partial wrap around hinges for
> 1/2" full inset doors. Now I need more and all I can find are for 3/4"
> doors. Any suggestions?
>
> Rob
>
I don't know hinges much beyond re-hanging a door but do you mean something
like this?
http://www.amazon.com/Amerock-BP7550-ORB-Self-Closing-Partial-
Overlay/dp/B000I22LUM
or
http://www.amazon.com/Amerock-BP8719-G10-Demountable-Partial-
Overlay/sim/B000PD24CY/2
or these
http://www.hardwaresource.com/hinges/CABINET+HINGES/Overlay+Hinges,
+Wrap+Around+-+Partial+Inset+Hinges/Overlay+Hinges,+Partial+Wrap
or (sorry the following's a Canadian link but USA should have them I guess)
http://www.homedepot.ca/product/1-2-in-partial-wrap-hinge-anitque-brass/901963
Search results from
https://startpage.com/do/search
(uses google but I like it better) using search criteria
hinge half inch partial wrap
On 9/20/2013 11:18 PM, [email protected] wrote:
> Mike, at the risk of sounding ungratefull, the search that you
> suggested was exactly the search that I used, and it appears that
> there are tons of hinges, however when you click on the links you will
> find that they are links to hinges for 3/4" doors. This is another
> case of Google providing bad information. It appears the the google
> search engine is ignoring the 1/2" portion of the search.
>
>
>
>
> On Fri, 20 Sep 2013 08:20:06 -0400, "Mike Marlow"
> <[email protected]> wrote:
>
>> [email protected] wrote:
>>
>>> Unfortunatly, I cannot remember where I got the hinges before and when
>>> I do google search all I get are 3/4" hinges.
>>>
>>
>> Use the search string I included in my earlier post. It shows all different
>> size hinges including 1/2"
I have to agree about ignoring the 1/2, although Mike's followup is good
info. I have noticed that google has become less selective and tries to
offer you something that might be close. Seems like google has taken a
step back.. When google first came out there engine was dead on pinpoint
accurate, while yahoo and excite were like google today. I miss the old
google.
--
Jeff
Mike, at the risk of sounding ungratefull, the search that you
suggested was exactly the search that I used, and it appears that
there are tons of hinges, however when you click on the links you will
find that they are links to hinges for 3/4" doors. This is another
case of Google providing bad information. It appears the the google
search engine is ignoring the 1/2" portion of the search.
On Fri, 20 Sep 2013 08:20:06 -0400, "Mike Marlow"
<[email protected]> wrote:
>[email protected] wrote:
>
>> Unfortunatly, I cannot remember where I got the hinges before and when
>> I do google search all I get are 3/4" hinges.
>>
>
>Use the search string I included in my earlier post. It shows all different
>size hinges including 1/2"
LeeValley has a good selection of hardware.... and tools
http://www.leevalley.com/US/Hardware/Index.aspx
On Friday, September 20, 2013 7:18:02 AM UTC-4, Mike Marlow wrote:
> [email protected] wrote:
>
>
>
> > Earlier this year I bought some 1/2" partial wrap around hinges for
>
> > 1/2" full inset doors. Now I need more and all I can find are for 3/4"
>
> > doors. Any suggestions?
>
> >
>
>
>
> Have you tried asking the supplier that you purchased to previous hinges
>
> from, or looking on the manufacturer's website, or doing a google search? A
>
> simple google search using the phrase "1/2" partial wrap around hinge"
>
> turned up a ton of results. Lots of options to chose from to match your
>
> existing hinges.
>
>
>
> --
>
>
>
> -Mike-
>
> [email protected]
On Sat, 21 Sep 2013 22:11:35 -0400, woodchucker <[email protected]>
>I have to agree about ignoring the 1/2, although Mike's followup is good
>info. I have noticed that google has become less selective and tries to
>offer you something that might be close. Seems like google has taken a
>step back.. When google first came out there engine was dead on pinpoint
>accurate, while yahoo and excite were like google today. I miss the old
>google.
That might well be because there's so many more websites available now
as compared to when Google first came out.
I frequently find myself putting quotation marks around my query words
in order to narrow down the searches to exact phrases.
[email protected] wrote:
> Earlier this year I bought some 1/2" partial wrap around hinges for
> 1/2" full inset doors. Now I need more and all I can find are for 3/4"
> doors. Any suggestions?
>
Have you tried asking the supplier that you purchased to previous hinges
from, or looking on the manufacturer's website, or doing a google search? A
simple google search using the phrase "1/2" partial wrap around hinge"
turned up a ton of results. Lots of options to chose from to match your
existing hinges.
--
-Mike-
[email protected]
[email protected] wrote:
> Unfortunatly, I cannot remember where I got the hinges before and when
> I do google search all I get are 3/4" hinges.
>
Use the search string I included in my earlier post. It shows all different
size hinges including 1/2"
--
-Mike-
[email protected]
On 9/19/2013 9:31 PM, [email protected] wrote:
> Earlier this year I bought some 1/2" partial wrap around hinges for
> 1/2" full inset doors. Now I need more and all I can find are for 3/4"
> doors. Any suggestions?
>
> Rob
>
I bet these folks have got what you are looking for.
http://www.wwhardware.com/cabinet-hinges
[email protected] wrote:
> Mike, at the risk of sounding ungratefull, the search that you
> suggested was exactly the search that I used, and it appears that
> there are tons of hinges, however when you click on the links you will
> find that they are links to hinges for 3/4" doors. This is another
> case of Google providing bad information. It appears the the google
> search engine is ignoring the 1/2" portion of the search.
>
Must be a localization thing with google or something. I just used the
exact same search string again, and one of the first returns was this site.
http://www.hardwaresource.com/hinges/CABINET+HINGES/Overlay+Hinges%2C+Wrap+Around+-+Partial+Inset+Hinges/Overlay+Hinges%2C+Partial+Wrap
Take a look - all different sizes.
--
-Mike-
[email protected]
[email protected] wrote:
>
>
> Thanks Mike, I guess I didn't accurately say what I am looking for.
> What I need is a partial wrap hinge for a 1/2" thick full inset door.
...or I misunderstood.
--
-Mike-
[email protected]
<[email protected]> wrote in message
news:[email protected]
> Earlier this year I bought some 1/2" partial wrap around
> hinges for 1/2" full inset doors. Now I need more and all
> I can find are for 3/4" doors.
Given the near universiality of 3/4" doors, I think you are going to have
extreme difficulty finding a hinge of the type you want made for a thinner
door.
Any suggestions?
Yes. Use a hinge for a 3/4 door and pad it out 1/4" on the back side.
Either as a narow strip along the hinge side or just as a pad under the
hinge.
--
dadiOH
____________________________
Winters getting colder? Tired of the rat race?
Taxes out of hand? Maybe just ready for a change?
Check it out... http://www.floridaloghouse.net
[email protected] wrote:
> On Sat, 21 Sep 2013 22:11:35 -0400, woodchucker <[email protected]>
>> I have to agree about ignoring the 1/2, although Mike's followup is good
>> info. I have noticed that google has become less selective and tries to
>> offer you something that might be close. Seems like google has taken a
>> step back.. When google first came out there engine was dead on pinpoint
>> accurate, while yahoo and excite were like google today. I miss the old
>> google.
>
> That might well be because there's so many more websites available now
> as compared to when Google first came out.
>
> I frequently find myself putting quotation marks around my query words
> in order to narrow down the searches to exact phrases.
Do a google search again and when the result pages come up click on
"Images" at the top of the screen.
--
Bill
In Hamptonburgh, NY
In the original Orange County. Est. 1683
To email, remove the double zeros after @
On 9/21/2013 9:11 PM, woodchucker wrote:
...
> ... I have noticed that google has become less selective and tries to
> offer you something that might be close. Seems like google has taken a
> step back.. When google first came out [their] engine was dead on pinpoint
> accurate, while yahoo and excite were like google today. I miss the old
> google.
Much has to do w/ paid content skewing results to the top I
think...combined with the advent of other 'bots that are used to foist
"hits" to enhance sites' ordering in search results.
The explosion of content is a part of it as well as others have
mentioned altho not convinced that's the key part...
--
Thanks for all of your suggestions. I finally found where I got the
hinges from it was http//www.dlawlesshardware.com
Rob
On Sat, 21 Sep 2013 20:59:13 -0400, "Mike Marlow"
<[email protected]> wrote:
>[email protected] wrote:
>
>>
>>
>> Thanks Mike, I guess I didn't accurately say what I am looking for.
>> What I need is a partial wrap hinge for a 1/2" thick full inset door.
>
>...or I misunderstood.
Unfortunatly, I cannot remember where I got the hinges before and when
I do google search all I get are 3/4" hinges.
On Fri, 20 Sep 2013 07:18:02 -0400, "Mike Marlow"
<[email protected]> wrote:
>[email protected] wrote:
>
>> Earlier this year I bought some 1/2" partial wrap around hinges for
>> 1/2" full inset doors. Now I need more and all I can find are for 3/4"
>> doors. Any suggestions?
>>
>
>Have you tried asking the supplier that you purchased to previous hinges
>from, or looking on the manufacturer's website, or doing a google search? A
>simple google search using the phrase "1/2" partial wrap around hinge"
>turned up a ton of results. Lots of options to chose from to match your
>existing hinges.