Ns

"Nonny"

11/11/2009 11:46 AM

Christmas gumball dispenser

One of the most complicated Christmas presents I made was gumball
dispensers. The idea came from a Workbench magazine article, but
the design was my own. The frame was made from scrap cherry and
the sides from book matched 3/16" walnut. The finish was Tung
oil. Gum balls were added by swinging a little door aside in the
upper part of the front, where they sat in an angled hopper. When
a plunger was pressed on the top rear, a gate permitted one to
fall below the hopper's floor level, where they rolled out along
an inclined ramp.

While complicated, they were surprisingly quick to make in
quantity. I made 2 dozen easily in just a few days.

--
Nonny

You cannot make a stupid kid smart by
handing him a diploma. Schools need standards
to measure the amount of education actually
absorbed by children. Don't sacrifice the smart
kids to make the dumb ones feel good about themselves.


This topic has 5 replies

bb

blackemmons

in reply to "Nonny" on 11/11/2009 11:46 AM

12/11/2009 4:21 AM

Thanks guys. That's a lot of brain work for an ol' guy to figure out.

Can some one just post it on a site like sawmillcreek.org? I can get
through most of that.

I was going to build some for the grand-kids for Christmas and was
looking for ideas, pics and plans.

Thanks for the help.

Jim

bb

blackemmons

in reply to "Nonny" on 11/11/2009 11:46 AM

11/11/2009 4:36 PM

On Nov 11, 2:47=A0pm, "Nonny" <[email protected]> wrote:
> "Nonny" <[email protected]> wrote in message
>
> news:[email protected]...
>
>
>
>
>
> > One of the most complicated Christmas presents I made was
> > gumball dispensers. The idea came from a Workbench magazine
> > article, but the design was my own. =A0The frame was made from
> > scrap cherry and the sides from book matched 3/16" walnut. =A0The
> > finish was Tung oil. =A0Gum balls were added by swinging a little
> > door aside in the upper part of the front, where they sat in an
> > angled hopper. =A0When a plunger was pressed on the top rear, a
> > gate permitted one to fall below the hopper's floor level, where
> > they rolled out along an inclined ramp.
>
> > While complicated, they were surprisingly quick to make in
> > quantity. =A0I made 2 dozen easily in just a few days.
>
> > --
> > Nonny
>
> > You cannot make a stupid kid smart by
> > handing him a diploma. =A0Schools need standards
> > to measure the amount of education actually
> > absorbed by children. Don't sacrifice the smart
> > kids to make the dumb ones feel good about themselves.
>
> Photo added to binaries group
>
> --
> Nonny
>
> You cannot make a stupid kid smart by
> handing him a diploma. =A0Schools need standards
> to measure the amount of education actually
> absorbed by children. Don't sacrifice the smart
> kids to make the dumb ones feel good about themselves.- Hide quoted text =
-
>
> - Show quoted text -

Where do I find this "binaries group" thingy??? Or do you have a link
to the picturess?

Thanks,
Jim

AE

Andrew Erickson

in reply to "Nonny" on 11/11/2009 11:46 AM

11/11/2009 8:40 PM

In article <[email protected]>,
[email protected] wrote:

> On Wed, 11 Nov 2009 16:36:16 -0800 (PST), blackemmons
> <[email protected]> wrote:
>
> >Where do I find this "binaries group" thingy??? Or do you have a link
> >to the picturess?
>
> It's alt.binaries.pictures.woodworking. It's not available through
> Google because they do not provide access to binary groups.
>
> You'll have to find an ISP that does support binary groups. Typically,
> most ISP's charge a specific rate for that type of access.
> Alternatively, you can pay a one time fee of ($2.95 I think) to
> Teranews to get limited access to binaries.

Or you could wander over to a web site that does archive (at least for a
spell) the group. <http://www.delorie.com/wood/abpw/> is one that some
kind soul has put up and apparently maintains. It even has a gumball
dispenser picture or two pretty near the top of the list, too...

--
Andrew Erickson

"He is no fool who gives what he cannot keep to gain that which he cannot
lose." -- Jim Elliot

u

in reply to "Nonny" on 11/11/2009 11:46 AM

11/11/2009 8:07 PM

On Wed, 11 Nov 2009 16:36:16 -0800 (PST), blackemmons
<[email protected]> wrote:

>Where do I find this "binaries group" thingy??? Or do you have a link
>to the picturess?

It's alt.binaries.pictures.woodworking. It's not available through
Google because they do not provide access to binary groups.

You'll have to find an ISP that does support binary groups. Typically,
most ISP's charge a specific rate for that type of access.
Alternatively, you can pay a one time fee of ($2.95 I think) to
Teranews to get limited access to binaries.

Ns

"Nonny"

in reply to "Nonny" on 11/11/2009 11:46 AM

11/11/2009 11:47 AM


"Nonny" <[email protected]> wrote in message
news:[email protected]...
> One of the most complicated Christmas presents I made was
> gumball dispensers. The idea came from a Workbench magazine
> article, but the design was my own. The frame was made from
> scrap cherry and the sides from book matched 3/16" walnut. The
> finish was Tung oil. Gum balls were added by swinging a little
> door aside in the upper part of the front, where they sat in an
> angled hopper. When a plunger was pressed on the top rear, a
> gate permitted one to fall below the hopper's floor level, where
> they rolled out along an inclined ramp.
>
> While complicated, they were surprisingly quick to make in
> quantity. I made 2 dozen easily in just a few days.
>
> --
> Nonny
>
> You cannot make a stupid kid smart by
> handing him a diploma. Schools need standards
> to measure the amount of education actually
> absorbed by children. Don't sacrifice the smart
> kids to make the dumb ones feel good about themselves.
>
>

Photo added to binaries group

--
Nonny

You cannot make a stupid kid smart by
handing him a diploma. Schools need standards
to measure the amount of education actually
absorbed by children. Don't sacrifice the smart
kids to make the dumb ones feel good about themselves.


You’ve reached the end of replies