I am looking for a flush mount ring pull. What I need is something
about 1" or so in diameter that will mount flush to a surface with a
ring that fits in the recess and can be lifted to pull up a door.
Sort of like a trap door handle but smaller. I have checked Lee
Valley and a few other web resources with no luck. Has anyone ever
used such a piece of hardware or know of a place to get one? Thank
you.
Doug
kilerbbb wrote:
> I am looking for a flush mount ring pull. What I need is something
> about 1" or so in diameter that will mount flush to a surface with a
> ring that fits in the recess and can be lifted to pull up a door.
> Sort of like a trap door handle but smaller. I have checked Lee
> Valley and a few other web resources with no luck. Has anyone ever
> used such a piece of hardware or know of a place to get one? Thank
> you.
> Doug
... and Rockler:
http://www.rockler.com/ecom7/product_details.cfm?&offerings_id=527&catid=6&objectgroup_id=104
--
Jack Novak
Buffalo, NY - USA
(Remove "SPAM" from email address to reply)
kilerbbb wrote:
> I am looking for a flush mount ring pull. What I need is something
> about 1" or so in diameter that will mount flush to a surface with a
> ring that fits in the recess and can be lifted to pull up a door.
> Sort of like a trap door handle but smaller. I have checked Lee
> Valley and a few other web resources with no luck. Has anyone ever
> used such a piece of hardware or know of a place to get one? Thank
> you.
> Doug
... and Rockler:
http://www.rockler.com/ecom7/product_details.cfm?&offerings_id=527&catid=6&objectgroup_id=104
--
Jack Novak
Buffalo, NY - USA
(Remove "SPAM" from email address to reply)
I saw something like this at Home Depot last week, back by the fence
hardware.
"kilerbbb" <[email protected]> wrote in message
news:[email protected]...
> I am looking for a flush mount ring pull. What I need is something
> about 1" or so in diameter that will mount flush to a surface with a
> ring that fits in the recess and can be lifted to pull up a door.
> Sort of like a trap door handle but smaller. I have checked Lee
> Valley and a few other web resources with no luck. Has anyone ever
> used such a piece of hardware or know of a place to get one? Thank
> you.
> Doug
In article <[email protected]>,
kilerbbb <[email protected]> wrote:
>
>
>I am looking for a flush mount ring pull. What I need is something
>about 1" or so in diameter that will mount flush to a surface with a
>ring that fits in the recess and can be lifted to pull up a door.
>Sort of like a trap door handle but smaller. I have checked Lee
>Valley and a few other web resources with no luck. Has anyone ever
>used such a piece of hardware or know of a place to get one? Thank
>you.
>Doug
I just happen to have -exactly- what you're asking about.
I've had these for -years-, so I don't know current availability.
Made by Brainerd Mfg. Co. East Rochester, NY 14445
Their part number 406XC "Solid brass FLUSH RING PULL"
physical dimension: 1-1/2" x 1-3/4" overall, the ring itself is 1" O.D.
That is a standard peice of Furniture hardware Of the top my head I can't
give you company names, but do a Google on " " "Campaign Hardware" If you
strike out get back to me i will look through my catalogues.
Good Luck,
George
"kilerbbb" <[email protected]> wrote in message
news:[email protected]...
> I am looking for a flush mount ring pull. What I need is something
> about 1" or so in diameter that will mount flush to a surface with a
> ring that fits in the recess and can be lifted to pull up a door.
> Sort of like a trap door handle but smaller. I have checked Lee
> Valley and a few other web resources with no luck. Has anyone ever
> used such a piece of hardware or know of a place to get one? Thank
> you.
> Doug
On 10-Nov-2003, [email protected] (kilerbbb) wrote:
> I have checked Lee
> Valley and a few other web resources with no luck.
Did you miss these? They sound like what you want.
<http://www.leevalley.com/hardware/page.asp?SID=&page=40224&category=3%2C43520%2C43521%2C43559&ccurrency=1>
Mike
http://www.vandykes.com/product/02008049/
<[email protected]> wrote in message
news:[email protected]...
: In article <[email protected]>,
: kilerbbb <[email protected]> wrote:
: >
: >
: >I am looking for a flush mount ring pull. What I need is something
: >about 1" or so in diameter that will mount flush to a surface with a
: >ring that fits in the recess and can be lifted to pull up a door.
: >Sort of like a trap door handle but smaller. I have checked Lee
: >Valley and a few other web resources with no luck. Has anyone ever
: >used such a piece of hardware or know of a place to get one? Thank
: >you.
: >Doug
:
: I just happen to have -exactly- what you're asking about.
: I've had these for -years-, so I don't know current availability.
:
: Made by Brainerd Mfg. Co. East Rochester, NY 14445
:
: Their part number 406XC "Solid brass FLUSH RING PULL"
:
: physical dimension: 1-1/2" x 1-3/4" overall, the ring itself is 1" O.D.
:
Bought one at the local Woodcraft store last week for the trap door to the
crawl space.
About $7 if I remember correctly.
Erik
"Ben" <[email protected]> wrote in message
news:[email protected]...
> I saw something like this at Home Depot last week, back by the fence
> hardware.
>
>
> "kilerbbb" <[email protected]> wrote in message
> news:[email protected]...
> > I am looking for a flush mount ring pull. What I need is something
> > about 1" or so in diameter that will mount flush to a surface with a
> > ring that fits in the recess and can be lifted to pull up a door.
> > Sort of like a trap door handle but smaller. I have checked Lee
> > Valley and a few other web resources with no luck. Has anyone ever
> > used such a piece of hardware or know of a place to get one? Thank
> > you.
> > Doug
>
>