Google search - Irwin countersink bits. Click on the 3rd picture
http://www.google.com/search?q=3Dirwin+camfer+bits&sourceid=3Die7&rls=3Dcom=
.microsoft:en-us:IE-Address&ie=3D&oe=3D&rlz=3D1I7SUNA_en#sclient=3Dpsy&hl=
=3Den&rls=3Dcom.microsoft:en-us%3AIE-Address&rlz=3D1I7SUNA_en&source=3Dhp&q=
=3Dirwin+counter+sink+bits&aq=3Df&aqi=3Dg-lv1&aql=3D&oq=3D&pbx=3D1&fp=3D4cd=
e0c04544dc3d8&biw=3D1259&bih=3D701
Sonny
On May 9, 10:21=A0pm, "Paul" <[email protected]> wrote:
> --
> Paul O."Bill" <[email protected]> wrote in message
>
> news:[email protected]...
>
> > Paul wrote:
> >> What is a good tool to use in a drill press for chamfering holes,
> >> something that won't grab or chatter?
>
> > How big of a hole (round or some other shape)? What's the material?
> > Router, Spokeshave, Dremel-tool? =A0Of course, you mentioned DP.
> > I'm just the group-student around here. Surely someone who really
> > knows will help, but I think it will be helpful if you will answer the
> > first two questions.
>
> > Bill
>
> Various hardwoods, hole sizes 7/16" to 1.0" Some different sizes in betwe=
en.
> HF is just down the street a bit, think I'll try the first tool mentioned
> and see what happens. Thanks.
45 degree chamfer? Router with a chamfer bit will
give you the cleanest surface. Not sure I've ever
seen a countersink for a 1" pilot hole, but a good
one won't be cheap.
"Paul" wrote:
> Various hardwoods, hole sizes 7/16" to 1.0" Some different sizes in
> between. HF is just down the street a bit, think I'll try the first
> tool mentioned and see what happens. Thanks.
----------------------------------
Save yourself the time and aggravation, forget HF.
Good cutting tools are not sold at HF.
Try WW Grainger, McMaster-Carr or equal.
Expect to pay about $15 for a decent counter sink.
Have fun.
Lew
"Sonny" wrote:
Google search - Irwin countersink bits. Click on the 3rd picture
http://www.google.com/search?q=irwin+camfer+bits&sourceid=ie7&rls=com.microsoft:en-us:IE-Address&ie=&oe=&rlz=1I7SUNA_en#sclient=psy&hl=en&rls=com.microsoft:en-us%3AIE-Address&rlz=1I7SUNA_en&source=hp&q=irwin+counter+sink+bits&aq=f&aqi=g-lv1&aql=&oq=&pbx=1&fp=4cde0c04544dc3d8&biw=1259&bih=701
-------------------------------
5 flute Irwin C'Sinks get the job done.
Lew
"Larry W" wrote:
> "Good" is relative and you have to watch what you get from the
> industrial
> suppliers, too. Grainger, M-C, and MSC all have low cost import
> lines
> that in some cases are identical to the items sold at HF.
---------------------------------
I wouldn't know, I don't go looking for crap.
Lew
On May 9, 11:59=A0pm, "Lew Hodgett" <[email protected]> wrote:
> "Sonny" wrote:
>
> Google search - Irwin countersink bits. =A0Click on the 3rd picture
>
> http://www.google.com/search?q=3Dirwin+camfer+bits&sourceid=3Die7&rls=3Dc=
om...
> -------------------------------
> 5 flute Irwin C'Sinks get the job done.
>
> Lew
For reamer type tools, those with odd numbers of
flutes cut rounder holes.
In article <[email protected]>, Paul <[email protected]> wrote:
>What is a good tool to use in a drill press for chamfering holes, something
>that won't grab or chatter?
>
>--
>Paul O.
>
Coutersink bits are generally available in common size ranges for various
angles. Here's some cheap ones that may work for you.
http://www.harborfreight.com/countersink-and-deburring-tool-set-66996.html
http://www.harborfreight.com/1-2-half-inch-six-flute-countersink-93342.html
Several name brands and other cheap ones are available from Amazon and
the other usual sources.
--
Better to be stuck up in a tree than tied to one.
Larry Wasserman - Baltimore Maryland - lwasserm(a)sdf. lonestar.org
Paul wrote:
> What is a good tool to use in a drill press for chamfering holes,
> something that won't grab or chatter?
>
How big of a hole (round or some other shape)? What's the material?
Router, Spokeshave, Dremel-tool? Of course, you mentioned DP.
I'm just the group-student around here. Surely someone who really
knows will help, but I think it will be helpful if you will answer the
first two questions.
Bill
WW wrote:
> "Bill"<[email protected]> wrote in message
> news:[email protected]...
>> Paul wrote:
>>> What is a good tool to use in a drill press for chamfering holes,
>>> something that won't grab or chatter?
>>>
>>
>>
>> How big of a hole (round or some other shape)? What's the material?
>> Router, Spokeshave, Dremel-tool? Of course, you mentioned DP.
>> I'm just the group-student around here. Surely someone who really
>> knows will help, but I think it will be helpful if you will answer the
>> first two questions.
>>
>> Bill
>
>
> Bill... Reread the heading......WOOD ww
Maple or pine??? Both "WOOD", no? : ) lol
Bill wrote:
> WW wrote:
>> "Bill"<[email protected]> wrote in message
>> news:[email protected]...
>>> Paul wrote:
>>>> What is a good tool to use in a drill press for chamfering holes,
>>>> something that won't grab or chatter?
>>>>
>>>
>>>
>>> How big of a hole (round or some other shape)? What's the material?
>>> Router, Spokeshave, Dremel-tool? Of course, you mentioned DP.
>>> I'm just the group-student around here. Surely someone who really
>>> knows will help, but I think it will be helpful if you will answer the
>>> first two questions.
>>>
>>> Bill
>>
>>
>> Bill... Reread the heading......WOOD ww
>
> Maple or pine??? Both "WOOD", no? : ) lol
At the same time, when I first asked, "What's the material", I was
wondering how "thick" the material present was--wanting to let one end
of a spokeshave into the hole if possible. Sorry if I was vague.
Bill
On Mon, 09 May 2011 22:14:12 +0000, Larry W wrote:
> In article <[email protected]>, Paul <[email protected]>
> wrote:
>>What is a good tool to use in a drill press for chamfering holes,
>>something that won't grab or chatter?
>>
>>--
>>Paul O.
>>
>>
> Coutersink bits are generally available in common size ranges for
> various angles.
I've had good luck with a countersink from Lee Valley in an old eggbeater
hand drill. If I've got more than a dozen or so, the same bit works in
my drill press. See:
<http://www.leevalley.com/us/wood/page.aspx?
p=41012&cat=1,180,42240,42281&ap=1>
--
Intelligence is an experiment that failed - G. B. Shaw
> http://www.harborfreight.com/countersink-and-deburring-tool-set-66996.html
>
> http://www.harborfreight.com/1-2-half-inch-six-flute-countersink-93342.html
>
I haven't tried the first ones, but the second sucks.
--
-MIKE-
"Playing is not something I do at night, it's my function in life"
--Elvin Jones (1927-2004)
--
http://mikedrums.com
[email protected]
---remove "DOT" ^^^^ to reply
On 5/9/2011 6:32 PM, -MIKE- wrote:
>> http://www.harborfreight.com/countersink-and-deburring-tool-set-66996.html
>>
>> http://www.harborfreight.com/1-2-half-inch-six-flute-countersink-93342.html
>>
>
> I haven't tried the first ones, but the second sucks.
Agreed. It's like they forgot to sharpen it or something...
--
"Our beer goes through thousands of quality Czechs every day."
(From a Shiner Bock billboard I saw in Austin some years ago)
To reply, eat the taco.
http://www.flickr.com/photos/bbqboyee/
"Larry W" <[email protected]> wrote in message
news:[email protected]...
> In article <[email protected]>, Paul <[email protected]> wrote:
> >What is a good tool to use in a drill press for chamfering holes, something
> >that won't grab or chatter?
> >
> >--
> >Paul O.
> >
>
> Coutersink bits are generally available in common size ranges for various
> angles. Here's some cheap ones that may work for you.
>
>
> http://www.harborfreight.com/countersink-and-deburring-tool-set-66996.html
>
> http://www.harborfreight.com/1-2-half-inch-six-flute-countersink-93342.html
>
> Several name brands and other cheap ones are available from Amazon and
> the other usual sources.
>
>
> --
> Better to be stuck up in a tree than tied to one.
>
> Larry Wasserman - Baltimore Maryland - lwasserm(a)sdf. lonestar.org
The 93342 one above is pure crap. It chatters like a woodpecker.
This one is good.
http://www.generaltools.com/-195-34--34-Rose-Pattern-Countersink_p_230.html
Art
On 5/9/11 7:09 PM, Steve Turner wrote:
> On 5/9/2011 6:32 PM, -MIKE- wrote:
>>> http://www.harborfreight.com/countersink-and-deburring-tool-set-66996.html
>>>
>>>
>>> http://www.harborfreight.com/1-2-half-inch-six-flute-countersink-93342.html
>>>
>>>
>>
>> I haven't tried the first ones, but the second sucks.
>
> Agreed. It's like they forgot to sharpen it or something...
>
The didn't forget. They just don't. :-)
--
-MIKE-
"Playing is not something I do at night, it's my function in life"
--Elvin Jones (1927-2004)
--
http://mikedrums.com
[email protected]
---remove "DOT" ^^^^ to reply
--
Paul O.
"Bill" <[email protected]> wrote in message
news:[email protected]...
> Paul wrote:
>> What is a good tool to use in a drill press for chamfering holes,
>> something that won't grab or chatter?
>>
>
>
> How big of a hole (round or some other shape)? What's the material?
> Router, Spokeshave, Dremel-tool? Of course, you mentioned DP.
> I'm just the group-student around here. Surely someone who really
> knows will help, but I think it will be helpful if you will answer the
> first two questions.
>
> Bill
Various hardwoods, hole sizes 7/16" to 1.0" Some different sizes in between.
HF is just down the street a bit, think I'll try the first tool mentioned
and see what happens. Thanks.
In article <[email protected]>,
Lew Hodgett <[email protected]> wrote:
>
>"Paul" wrote:
>
>> Various hardwoods, hole sizes 7/16" to 1.0" Some different sizes in
>> between. HF is just down the street a bit, think I'll try the first
>> tool mentioned and see what happens. Thanks.
>----------------------------------
>Save yourself the time and aggravation, forget HF.
>
>Good cutting tools are not sold at HF.
>
>Try WW Grainger, McMaster-Carr or equal.
>
>Expect to pay about $15 for a decent counter sink.
>
>Have fun.
>
>Lew
>
>
"Good" is relative and you have to watch what you get from the industrial
suppliers, too. Grainger, M-C, and MSC all have low cost import lines
that in some cases are identical to the items sold at HF.
--
There is always an easy solution to every human problem -- neat,
plausible, and wrong." (H L Mencken)
Larry Wasserman - Baltimore Maryland - lwasserm(a)sdf. lonestar. org
Actually, what I'd almost rather have is a flexible type of sanding disk on
a mandrel that, in a drill press, or hand drill for that matter, could be
ran down on top of the hole forming a chamfer or rounded edge. Don't know
what you call it, and haven't been able to find anything. Any ideas there?
Paul O.
"Bill" <[email protected]> wrote in message
news:[email protected]...
> Paul wrote:
>> What is a good tool to use in a drill press for chamfering holes,
>> something that won't grab or chatter?
>>
>
>
> How big of a hole (round or some other shape)? What's the material?
> Router, Spokeshave, Dremel-tool? Of course, you mentioned DP.
> I'm just the group-student around here. Surely someone who really
> knows will help, but I think it will be helpful if you will answer the
> first two questions.
>
> Bill
Bill... Reread the heading......WOOD ww