Have an old PowerKraft (Wards) tablesaw I mounted a Craftsman "Align a Fence
24/24" on without too much difficulty. Just picked up an older Powermatic
10" cabinet saw and was thinking of mounting the "Align a Fence" on it.
Problem is the Powermatic is 28" from to back vs 27" on most
"non-industrial" table saws. Result, need to add an inch to my fence or
replace the extrusion with one that is an inch longer. Trying to save a
buck for now.
MB
"William" <[email protected]> wrote in message
news:dtEDc.12160$6r1.6238@fed1read06...
> not sure who makes the fence. I made some radical modifications to my
> craftsman saw. If interested I might be able to help you out.
> "nevems2" <[email protected]> wrote in message
> news:[email protected]...
> > Any idea who makes the "Align a Fence" for Sears. Would like a longer
> > extrusion for the fence.
> >
> >
> >
> >
> > -----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
> > http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
> > -----== Over 100,000 Newsgroups - 19 Different Servers! =-----
>
>
-----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
-----== Over 100,000 Newsgroups - 19 Different Servers! =-----
"nevems2" <[email protected]> wrote in message
news:[email protected]...
>>> Any idea who makes the "Align a Fence" for Sears.<<<<
Not sure that they made the fence but my saw that came equipped with an
Align a Fence and was manufactured by Ryobi. I think that all Craftsman
products beginning with "315." are made by Ryobi. RM~
PS, Believe it or not, I purchased this saw almost 3 months ago and still
have not turned it on. What few times I've needed a table saw in that time
frame I've used my old one so I won't get the new one dirty. ; )
> not sure who makes the fence. I made some radical modifications to my
> craftsman saw. If interested I might be able to help you out.
Such as? I like mine fine the way it is, but am open to improvements.
I changed my 24/24 to a 14/34; the previous owner replaced the motor, the
switch, and the pulleys.
"Rob Mills" <[email protected]> wrote in message
news:MrDDc.82069$%T.31515@okepread05...
>
>
> PS, Believe it or not, I purchased this saw almost 3 months ago and still
> have not turned it on. What few times I've needed a table saw in that time
> frame I've used my old one so I won't get the new one dirty. ; )
>
>
Tell the truth - you just didn't want to disturb that convenient flat
surface that is so handy to plop stuff down on as you walk by...
--
-Mike-
[email protected]
not sure who makes the fence. I made some radical modifications to my
craftsman saw. If interested I might be able to help you out.
"nevems2" <[email protected]> wrote in message
news:[email protected]...
> Any idea who makes the "Align a Fence" for Sears. Would like a longer
> extrusion for the fence.
>
>
>
>
> -----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
> http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
> -----== Over 100,000 Newsgroups - 19 Different Servers! =-----
"Rob Mills" <[email protected]> wrote in message
news:MrDDc.82069$%T.31515@okepread05...
>
> "nevems2" <[email protected]> wrote in message
> news:[email protected]...
>
> >>> Any idea who makes the "Align a Fence" for Sears.<<<<
>
> Not sure that they made the fence but my saw that came equipped with an
> Align a Fence and was manufactured by Ryobi. I think that all Craftsman
> products beginning with "315." are made by Ryobi. RM~
>
> PS, Believe it or not, I purchased this saw almost 3 months ago and still
> have not turned it on. What few times I've needed a table saw in that time
> frame I've used my old one so I won't get the new one dirty. ; )
i barely used my butcher block for 2 months for the same reason <g>
randy
"Mike Marlow" <[email protected]> wrote in message
news:[email protected]...
>>>Tell the truth - you just didn't want to disturb that convenient flat
surface that is so handy to plop stuff down on as you walk by<<<
You've got it, the new saw with two extension wings had more stuff to unload
than the old saw with only one wing. ;(