Boker=knives--my thought too. With that much handle on it, I'm leaning
toward it being a tool to
straighten blades?
"Mike" <[email protected]> wrote in message
news:[email protected]...
> R.H. wrote:
>> The latest set has just been posted:
>>
>> http://puzzlephotos.blogspot.com/
>>
>>
>> Rob
>>
>>
> 635- Germany, Boker, = Knives - maybe to check knife blank thickness ?
Jeff R wrote:
> "Andrew VK3BFA" <[email protected]> wrote in message
> news:[email protected]...
>
> > 635. Wire gauge. (I still have one in me tool kit from when I was a
> > telephone lineman...)
>
> ...for the County?
>
>
> >
> > Andrew VK3BFA.
> >
>
> Found another overload yet?
No. Thats power liney work,, I was a telephone liney.. They didnt go
"bang" when they shorted, not enough current. And the power guys only
had 3 conductors to deal with. - dead easy. They could find faults by
looking up. Telephony was harder to fault find - no flames or
smoke.... Mine had up to 9600 pairs in a cable....all gone now,
replaced by fibre optics. .....sigh.....the "good ol days".....
Andrew VK3BFA.
630 microphone
631 night watchman key- key is chaned to a station, watchman comes
around and inserts the key into a clockwork-rotating-paper recording
device and turns the key to make an imprint on the paper
632 DIP IC inserter, the metal post is to attach an anti-static strap
633 scribe of some sort
634 -
635 -
Dave
Rich Grise wrote:
>
> Andrew, I believe you might have missed Jeff's little joke:
> http://www.cowboylyrics.com/lyrics/campbell-glen/wichita-lineman-622.html
>
> Cheers!
> Rich
Nope, I didnt. The Glen Campbell song refers to power lineman. I was a
telephone lineman. Only in old movies do they have open wire telephone
lines running on poles. (and railways still use em for signalling) And
from the answers here, my 635=wire gauge is possibly wrong - it just
"looks" identical to the one I have (sans wooden handle)- it measured
wire diameter, so you could tell if it was 4lb, 10lb, 20lb etc wire...
I was issued it when the phone company went metric, so there was
confusion for a while hence the need for a gauge...
Andrew VK3BFA.
Howdy!
630: Microphone
631: When a guard walks a beat, he may have a device that records
when he gets to each point along the beat. Each station has
one of these key-thingys that prints its number along with
some sort of time stamp in the device to prove that the
guard visited that stop (presumably at around the time he was
expected to do so).
632: either some sort of stamping device, or something for handling
IC chips
633: looks like it's for scribing a line down the "middle" of a
plank or the like.
634: fancy lightning rod?
635: sheet metal gauge?
hmmm...what did everyone else come up with?
yours,
Michael
--
Michael and MJ Houghton | Herveus d'Ormonde and Megan O'Donnelly
[email protected] | White Wolf and the Phoenix narrowwares
Bowie, MD, USA | http://whitewolfandphoenix.com
Proud member of the SCA Internet Whitewash Squad
634. An art piece.
--
Mark Brader | "[He] is my nation's leader ... i.e., the piece of
Toronto | clear tape at the beginning of a cassette that you
[email protected] | can't record anything on...." --R.H. Draney
R.H. <[email protected]> wrote:
> http://puzzlephotos.blogspot.com/
630: An earthquake save clock. :-)
631: Ha! This is a "registering" key. If you turn it, a number (here:
"3") will be registered on a paper strip in the lock. I guess.
632: Has to do with electronics. Either for extracting or inserting ICs.
Or so. I guess.
635: for glas working. Used for breaking off.
The rest is so obvious, that I didn't care to answer.
Nick
--
Motor Modelle // Engine Models
http://www.motor-manufaktur.de
DIY-DRO // Eigenbau-Digitalanzeige
http://www.yadro.de
"Andrew VK3BFA" <[email protected]> wrote in message
news:[email protected]...
> 635. Wire gauge. (I still have one in me tool kit from when I was a
> telephone lineman...)
...for the County?
>
> Andrew VK3BFA.
>
Found another overload yet?
All but one have been identified this week:
630. Carbon ring microphone
631. Night watchman's key
632. Integrated circuit insertion tool
633. Haven't been able to find out exactly what this is for, I'll have to
do more research on this tool.
634. Lightning rod tip
635. Wrest saw set
Links, new photos and more info have been posted on the answer page:
http://pzphotosan111lr.blogspot.com/
Rob
"Alexander Thesoso" <[email protected]> wrote in
news:YM5Zf.739$c_1.494@trndny04:
> 630 Microphone
>
> 631 Safe Deposit Box Key ?? Box 3 in some small bank.
>
> 632 Integrated Circuit Insertion Tool. Used to push a Dual-Inline IC
> into a circuit board without bending some of the pins.
>
> 633 Guess... Tool for scoring/splitting wood/cardboard at some
> proportional distance between parallel edges.
>
>
> 634 Guess... Lightning rod tip?
>
>
>
> "R.H." <[email protected]> wrote in message
> news:[email protected]...
>> The latest set has just been posted:
>>
>> http://puzzlephotos.blogspot.com/
>>
>>
>> Rob
>>
>>
>
>
>
631 - Detex Watchclock Station Key. The night watchman would carry a
clock and insert a key. The clock would record the key number and the
time.
630 Microphone
631 Safe Deposit Box Key ?? Box 3 in some small bank.
632 Integrated Circuit Insertion Tool. Used to push a Dual-Inline IC into
a circuit board without bending some of the pins.
633 Guess... Tool for scoring/splitting wood/cardboard at some proportional
distance between parallel edges.
634 Guess... Lightning rod tip?
"R.H." <[email protected]> wrote in message
news:[email protected]...
> The latest set has just been posted:
>
> http://puzzlephotos.blogspot.com/
>
>
> Rob
>
>
R.H. wrote:
> The latest set has just been posted:
>
> http://puzzlephotos.blogspot.com/
>
>
> Rob
>
>
Before I go looking at the other answers
630 - microphone
631 - Time Clock station key, impresses the number on a portable time
clock, verifies that a watchman is making his rounds
632 - IC Dip insertion tool
633 - Belting spliter?
634 - part of a lightening rod ???
635 - no idea on this one
Howard from RCM
633 is a paper measure. Say you need bundles of 250 sheets. You count =
out 250 then set the "spoon" so that you just jab the stack and viola =
250 sheets.
"Nick M=FCller" <[email protected]> wrote in message =
news:1hddd8x.z67z0l1w7gn13N%[email protected]...
> R.H. <[email protected]> wrote:
>=20
> > http://puzzlephotos.blogspot.com/
>=20
> 630: An earthquake save clock. :-)
> 631: Ha! This is a "registering" key. If you turn it, a number (here:
> "3") will be registered on a paper strip in the lock. I guess.
> 632: Has to do with electronics. Either for extracting or inserting =
ICs.
> Or so. I guess.
> 635: for glas working. Used for breaking off.
>=20
>=20
> The rest is so obvious, that I didn't care to answer.
>=20
> Nick
> --=20
> Motor Modelle // Engine Models
> http://www.motor-manufaktur.de
> DIY-DRO // Eigenbau-Digitalanzeige
> http://www.yadro.de
According to R.H. <[email protected]>:
> The latest set has just been posted:
>
> http://puzzlephotos.blogspot.com/
O.K. Posting from rec.crafts.metalworking again:
630) Ancient microphone -- carbon type, I believe. The spring
mounting is to reduce the audibility of vibrations from the
table, or when the microphone is hand-held.
631) Night Watchman's rounds recording key. It goes into a clock
assembly which he carries, and records the station numbers by
imprinting through carbon paper onto a ribbon of paper, along
with the time, so it can be proven that he was were he should be
when he should be. The visible '3' is the station number.
632) IC inserter. The pin on the end of the handle is for attaching
an anti-static ground strap. The sides compress the pins to
line them up perfectly (they are normally spread a little wide)
and they are then pressed out of that grip into the socket. The
silver area on the handle is for spreading the pins if they are
bent too far in.
This one looks like one for 28 pin ICs, not the 40 pin ones used
for early microprocessors like the 8080 or the 6800.
633) I've never seen one like this before, but it looks as though it
is for cutting something like leather to a preset width from a
known greater width. Making belts -- perhaps flat machine drive
belts.
It obviously needs sharpening before it will be good for leather
again.
634) The top of a lightning rod. The sharp points discharge static
charges more easily than rounded surfaces, so they bleed off
the charges before it reaches full strike level.
This one is more ornate (and possibly better) than the ones on
the house which I grew up in in South Texas.
635) If it had markings, I would say that it was for gauging
thickness of sheet metal. Since it does not, it is perhaps
for bending arms of relays or something similar.
Now to see what others have answered.
Enjoy,
DoN.
--
Email: <[email protected]> | Voice (all times): (703) 938-4564
(too) near Washington D.C. | http://www.d-and-d.com/dnichols/DoN.html
--- Black Holes are where God is dividing by zero ---
Alexander Thesoso wrote:
> 630 Microphone
>
> 631 Safe Deposit Box Key ?? Box 3 in some small bank.
>
> 632 Integrated Circuit Insertion Tool. Used to push a Dual-Inline
> IC into a circuit board without bending some of the pins.
>
> 633 Guess... Tool for scoring/splitting wood/cardboard at some
> proportional distance between parallel edges.
>
>
> 634 Guess... Lightning rod tip?
>
>
>
> "R.H." <[email protected]> wrote in message
> news:[email protected]...
>> The latest set has just been posted:
>>
>> http://puzzlephotos.blogspot.com/
>>
>>
>> Rob
631 looks like a watchmans/security guard's key . The number leaves an
impression ...
633 looks similar to a tool for splitting leather into strips ...
--
Snag aka OSG #1
'76 FLH "Bag Lady"
BS132 SENS NEWT
"A hand shift is a manly shift ."
<shamelessly stolen>
none to one to reply
On Thu, 06 Apr 2006 08:28:10 GMT, "R.H." <[email protected]> wrote:
>The latest set has just been posted:
>
>http://puzzlephotos.blogspot.com/
>
>
>Rob
>
630 Microphone
631 Jail Cell key
632 IC insertion tool
633 Sheet stock scoring tool
634 Pain in the butt fence top
635 Safety wire twister
Take care,
love your efforts
Brian Lawson,
Bothwell, Ontario
On Thu, 06 Apr 2006 05:41:05 -0700, Andrew VK3BFA wrote:
> Jeff R wrote:
>> "Andrew VK3BFA" <[email protected]> wrote in message
>>
>> > 635. Wire gauge. (I still have one in me tool kit from when I was a
>> > telephone lineman...)
>>
>> ...for the County?
>> Found another overload yet?
>
> No. Thats power liney work,, I was a telephone liney.. They didnt go
> "bang" when they shorted, not enough current. And the power guys only
> had 3 conductors to deal with. - dead easy. They could find faults by
> looking up. Telephony was harder to fault find - no flames or
> smoke.... Mine had up to 9600 pairs in a cable....all gone now,
> replaced by fibre optics. .....sigh.....the "good ol days".....
Andrew, I believe you might have missed Jeff's little joke:
http://www.cowboylyrics.com/lyrics/campbell-glen/wichita-lineman-622.html
Cheers!
Rich