On Friday, September 26, 2003 at 6:29:59 PM UTC-5, molander wrote:
> Hi,
> The beltsander is a 3" Heavy Duty one Model # H-31A.The drive belt I
> need is only 6" long #MS 1774. If anyone can give me a supplier for
> these belts I would much appreciate it, the one I'm using is about to
> break.
>
> Thanks
> Marc
Marc, simply measure the belt (Length and width, V,cog, etc) which is easy now that its broken and go looking at the sites that sell belts and you will find something like http://www.vbeltsupply.com/
Call them and tell them what you need. Then post back here, as there are others wanting this belt.
On 5/22/2017 9:44 AM, Adam wrote:
> replying to molander, Adam wrote:
> I need the same belt! Any luck finding a replacement?
>
For sure. When he posted this in 2003, he found a guy who had a gross
of them sitting on the shelf for $1.99 each. No big market so he
probably still has them FOURTEEN YEARS LATER, but they've all
disintegrated with dry rot!
"Dr. Deb" <[email protected]> writes:
>On Friday, September 26, 2003 at 6:29:59 PM UTC-5, molander wrote:
>> Hi,
>> The beltsander is a 3" Heavy Duty one Model # H-31A.The drive belt I
>> need is only 6" long #MS 1774. If anyone can give me a supplier for
>> these belts I would much appreciate it, the one I'm using is about to
>> break.
>>
>> Thanks
>> Marc
>
>Marc, simply measure the belt (Length and width, V,cog, etc) which is easy now that its broken and go looking at the sites that sell belts and you will find something like http://www.vbeltsupply.com/
>
Marc gave up after waiting fourteen years for your response.
Take it to W.W. Grainger, if you have one.
Also a car parts place can get it.
Don't bother with the number.
Wilson
"molander" <[email protected]> wrote in message
news:[email protected]...
> Hi,
> The beltsander is a 3" Heavy Duty one Model # H-31A.The drive belt I
> need is only 6" long #MS 1774. If anyone can give me a supplier for
> these belts I would much appreciate it, the one I'm using is about to
> break.
>
> Thanks
> Marc
On 26 Sep 2003 16:29:59 -0700, [email protected] (molander) Crawled
out of the shop and said. . .:
>Hi,
>The beltsander is a 3" Heavy Duty one Model # H-31A.The drive belt I
>need is only 6" long #MS 1774. If anyone can give me a supplier for
>these belts I would much appreciate it, the one I'm using is about to
>break.
>
>Thanks
>Marc
Try a link belt available at most WWing stores...they can be made any
length you like as they are made of little links