--
mike hide
"Mike Hide" <[email protected]> wrote in message news:...
> I have put a sketch on ABPW showing how I would do it . It can be done
using
> a saw and rasps if necessary ,carving tools would be preferred but
> certainly not necessary...mjh
>
> --
> mike hide
>
>
>
> "Bob Schmall" <[email protected]> wrote in message
> news:[email protected]...
> > I've started on a stereo cabinet in a southwestern style with rope
carved
> > sections on each of the four legs, about 12-13 inches worth. Can anyone
> > offer some advice or sources of information? I've googled and checked my
> > personal and local libraries, but there's not a lot available. I've done
a
> > little carving and have about 5 chisels, but this will need to look well
> > finished, closer to machine-turned than hand carved. Thanks in advance,
> > Bob
> >
> > --
> > Failure is not an option
> > But it is a possibility
> >
> >
>