I can't find anything about ON-GRADE anywhere.
I went to Columbia's site could not find anything.
Don't know what it means.
see: http://i.imgur.com/eqrXfhj.jpg
Anyone have an idea, got it from HD a few months ago for 51 cents before
they stopped doing 51 cents..
The 51 cents were for the remnants of what someone already paid for. ie
they bought a full sheet but only needed a portion of it and had it
cut.. the rest would go to .51 or 1.02.. no more. Now HD wants 70% of
the retail value.
--
Jeff
woodchucker <[email protected]> wrote:
> On 3/25/2014 7:39 PM, Swingman wrote:
>> On 3/19/2014 8:11 PM, woodchucker wrote:
>>
>>> I can't find anything about ON-GRADE anywhere.
>>> I went to Columbia's site could not find anything.
>>>
>>> Don't know what it means.
>>> see: http://i.imgur.com/eqrXfhj.jpg
>>
>> I've always thought it was relevant to "appearance" ... IOW, the
>> "appearance" of the plywood is "on grade" if it coincides with the
>> standard plywood grading system of the country or area with regard to
>> the "appearance" of lumber grade it is produced from.
>>
>> But, I could be wrong ...
>>
>
> Sorry, I'm not following.
Helps to understand how lumber is graded for specific use.
When it comes to a specific _use_ for interior, furniture, shop, etc.,
both hardwoods and softwoods are graded based on "appearance".
Hardwoods are basically "appearance" graded (board size and clear surface
area) as a rule; softwoods are generally either one of two categories
"construction" grade (strength), or "appearance" grade (finish and select),
depending upon use.
With regard to the original question, you will find the phrase "on-grade"
used mostly by global suppliers. I don't know it as a fact, but, from lack
of any other guidance, I have presumed the phrase, in regard to the product
designated as such, was to indicate it was in compliance with said
"appearance based" grading standards??
Again, I could be wrong in that regard ...
--
www.ewoodshop.com (Mobile)
On 3/25/2014 7:39 PM, Swingman wrote:
> On 3/19/2014 8:11 PM, woodchucker wrote:
>
>> I can't find anything about ON-GRADE anywhere.
>> I went to Columbia's site could not find anything.
>>
>> Don't know what it means.
>> see: http://i.imgur.com/eqrXfhj.jpg
>
> I've always thought it was relevant to "appearance" ... IOW, the
> "appearance" of the plywood is "on grade" if it coincides with the
> standard plywood grading system of the country or area with regard to
> the "appearance" of lumber grade it is produced from.
>
> But, I could be wrong ...
>
Sorry, I'm not following.
--
Jeff
On 3/20/2014 10:13 AM, dpb wrote:
> On 3/20/2014 9:10 AM, woodchucker wrote:
>> On 3/20/2014 1:01 AM, Gramps' shop wrote:
>>> Maybe a missing "C" as on con grade for construction? Just my wild ass
>>> guess.
>>>
>>> Larry
>>>
>>
>> So one face looks like an A face, the other a C face..
>> But ON???
>
> Seems like a reasonable guess from the letters but looking at the stamp
> on the picture doesn't look like the chance of anything being missing is
> high since it's so clear over the entire edge so I doubt that's the answer.
>
> Did you try the "contact us" link to ask Columbia directly? Since they
> have so many specialty products it's likely got a meaning specific to
> them would be my guess.
>
> --
>
>
>
No I didn't.
Just figured a search on their site would explain it, and it didn't.
I guess I could go that route.
--
Jeff
On 3/19/2014 8:11 PM, woodchucker wrote:
> I can't find anything about ON-GRADE anywhere.
> I went to Columbia's site could not find anything.
>
> Don't know what it means.
> see: http://i.imgur.com/eqrXfhj.jpg
I've always thought it was relevant to "appearance" ... IOW, the
"appearance" of the plywood is "on grade" if it coincides with the
standard plywood grading system of the country or area with regard to
the "appearance" of lumber grade it is produced from.
But, I could be wrong ...
--
eWoodShop: www.eWoodShop.com
Wood Shop: www.e-WoodShop.net
https://www.google.com/+eWoodShop
https://plus.google.com/+KarlCaillouet/posts
http://www.custommade.com/by/ewoodshop/
KarlCaillouet@ (the obvious)
"woodchucker" <[email protected]> wrote in message
news:[email protected]
> I can't find anything about ON-GRADE anywhere.
> I went to Columbia's site could not find anything.
>
> Don't know what it means.
> see: http://i.imgur.com/eqrXfhj.jpg
Floor level or above?
--
dadiOH
____________________________
Winters getting colder? Tired of the rat race?
Taxes out of hand? Maybe just ready for a change?
Check it out... http://www.floridaloghouse.net
Not sure what on grade....
I have a saying here to clients....
The grade is #2 or better.......
#3 or better.....
I tell clients............the grade........"It doesn't get any better"
john
"woodchucker" wrote in message
news:[email protected]...
I can't find anything about ON-GRADE anywhere.
I went to Columbia's site could not find anything.
Don't know what it means.
see: http://i.imgur.com/eqrXfhj.jpg
Anyone have an idea, got it from HD a few months ago for 51 cents before
they stopped doing 51 cents..
The 51 cents were for the remnants of what someone already paid for. ie
they bought a full sheet but only needed a portion of it and had it
cut.. the rest would go to .51 or 1.02.. no more. Now HD wants 70% of
the retail value.
--
Jeff
On 3/20/2014 9:10 AM, woodchucker wrote:
> On 3/20/2014 1:01 AM, Gramps' shop wrote:
>> Maybe a missing "C" as on con grade for construction? Just my wild ass
>> guess.
>>
>> Larry
>>
>
> So one face looks like an A face, the other a C face..
> But ON???
Seems like a reasonable guess from the letters but looking at the stamp
on the picture doesn't look like the chance of anything being missing is
high since it's so clear over the entire edge so I doubt that's the answer.
Did you try the "contact us" link to ask Columbia directly? Since they
have so many specialty products it's likely got a meaning specific to
them would be my guess.
--
On 3/20/2014 9:32 AM, woodchucker wrote:
> On 3/20/2014 10:13 AM, dpb wrote:
...
>> Did you try the "contact us" link to ask Columbia directly? Since they
>> have so many specialty products it's likely got a meaning specific to
>> them would be my guess.
>>
...
> No I didn't.
> Just figured a search on their site would explain it, and it didn't.
> I guess I could go that route.
I didn't see it at a top level, either, but then again I didn't try to
read the detail product data sheet on every product category, either... :)
--
On 3/26/2014 6:47 AM, Swingman wrote:
...
> With regard to the original question, you will find the phrase "on-grade"
> used mostly by global suppliers. I don't know it as a fact, but, from lack
> of any other guidance, I have presumed the phrase, in regard to the product
> designated as such, was to indicate it was in compliance with said
> "appearance based" grading standards??
>
> Again, I could be wrong in that regard ...
Seems a plausible supposition; I don't recall having ever seen it before
the posted picture. Then again, we don't have any of the big box stores
around here...
Interestingly, like OP I did some searching and found no reference
whatever to it in any of the ply association trade group sites or
grading references, nor did a search at the Forest Products Lab site
return any seemingly relevant hits. I didn't spend a lot of time, but
generally stuff will show up pretty quickly...
But, that's as a good a guess as we gots at the moment until/unless OP
does contact Columbia and gets an answer and then lets us know what they
say...
I'd also guess it's that or something very similar.
--
On 3/26/2014 9:24 AM, dpb wrote:
> On 3/26/2014 6:47 AM, Swingman wrote:
> ...
>
>> With regard to the original question, you will find the phrase "on-grade"
>> used mostly by global suppliers. I don't know it as a fact, but, from
>> lack
>> of any other guidance, I have presumed the phrase, in regard to the
>> product
>> designated as such, was to indicate it was in compliance with said
>> "appearance based" grading standards??
>>
>> Again, I could be wrong in that regard ...
>
> Seems a plausible supposition; I don't recall having ever seen it before
> the posted picture. Then again, we don't have any of the big box stores
> around here...
>
> Interestingly, like OP I did some searching and found no reference
> whatever to it in any of the ply association trade group sites or
> grading references, nor did a search at the Forest Products Lab site
> return any seemingly relevant hits. I didn't spend a lot of time, but
> generally stuff will show up pretty quickly...
>
> But, that's as a good a guess as we gots at the moment until/unless OP
> does contact Columbia and gets an answer and then lets us know what they
> say...
>
> I'd also guess it's that or something very similar.
>
> --
I did send Columbia an email asking what it meant the next day. I have
not heard back.
--
Jeff