Hi all
I have 2 doors left over from a project, with 35 mm (~1,5") holes for
"eurohinges", center placed 24 mm from the edge (almost 1 inch) for a
kitchen cupboard.
I am planning on using them for a 45 degree cupboard, for a corner - 5-
sided. I want the idea of a classic corner cupboard with modern
styling.
My problem is the hinge
Do anyone have information on hinges for this? I found them in a local
shop here, but lack drawings/ideas.
According to the catalog, 2 sides have to be cut to 45 degrees in the
"ends", the the door goes above.
Sonnich
On Mar 26, 4:35=A0pm, jodleren <[email protected]> wrote:
> Hi all
>
> I have 2 doors left over from a project, with 35 mm (~1,5") holes for
> "eurohinges", center placed 24 mm from the edge (almost 1 inch) for a
> kitchen cupboard.
> I am planning on using them for a 45 degree cupboard, for a corner - 5-
> sided. I want the idea of a classic corner cupboard with modern
> styling.
>
> My problem is the hinge
> Do anyone have information on hinges for this? I found them in a local
> shop here, but lack drawings/ideas.
> According to the catalog, 2 sides have to be cut to 45 degrees in the
> "ends", the the door goes above.
>
> Sonnich
I'm not certain I understand the shape of your corner cabinet. If it
is 5 sided and the most forward side panels are parallel to each other
then 120 degree euro hinges should articulate the same way as if it
were an ordinary 3 sided square cabinet.
If the most forward side panels are at 90 degrees to each other you
may be able to get 45 degree wedges to fit behind the hinges. You can
probably find them in the catalogs or web sites of the hinge
manufacturer. Look for Blum, Hettich, Grass, Salice,or Hafele.
Joe G
On 3/26/2010 3:35 PM, jodleren wrote:
> Hi all
>
> I have 2 doors left over from a project, with 35 mm (~1,5") holes for
> "eurohinges", center placed 24 mm from the edge (almost 1 inch) for a
> kitchen cupboard.
> I am planning on using them for a 45 degree cupboard, for a corner - 5-
> sided. I want the idea of a classic corner cupboard with modern
> styling.
>
> My problem is the hinge
> Do anyone have information on hinges for this? I found them in a local
> shop here, but lack drawings/ideas.
> According to the catalog, 2 sides have to be cut to 45 degrees in the
> "ends", the the door goes above.
>
> Sonnich
I'm using these hinges for 45 deg. corner cupboards. They require a 35
mm hole but it should be centered at 22.5 mm from the door edge. The
edge of the hole is 5 mm from the edge of the door. There is about 5
mm of adjustment in the hinges in that direction.
http://www.leevalley.com/hardware/page.aspx?c=2&p=55343&cat=3,41241,55420
Lorence
On Mar 27, 8:45=A0pm, LdB <[email protected]> wrote:
> On 3/26/2010 3:35 PM, jodleren wrote:
>
>
>
> > Hi all
>
> > I have 2 doors left over from a project, with 35 mm (~1,5") holes for
> > "eurohinges", center placed 24 mm from the edge (almost 1 inch) for a
> > kitchen cupboard.
> > I am planning on using them for a 45 degree cupboard, for a corner - 5-
> > sided. I want the idea of a classic corner cupboard with modern
> > styling.
>
> > My problem is the hinge
> > Do anyone have information on hinges for this? I found them in a local
> > shop here, but lack drawings/ideas.
> > According to the catalog, 2 sides have to be cut to 45 degrees in the
> > "ends", the the door goes above.
>
> >Sonnich
>
> I'm using these hinges for 45 deg. corner cupboards. They require a 35
> mm hole but it should be centered at 22.5 mm from the door edge. The
> edge of the hole is 5 mm from the edge of the door. =A0There is about 5
> mm of adjustment in the hinges in that direction.
>
> http://www.leevalley.com/hardware/page.aspx?c=3D2&p=3D55343&cat=3D3,41241=
,5...
>
> Lorence
That very much what I am looking for.
I just found this:
http://www.rockler.com/product.cfm?page=3D21411
I want to have a "box", then cut a curner of - the idea is as of now,
to have 2 "rear sides" app 35 cm , 2 "sides" 10 cm, and one door 35
cm.
The sides should be with a 45 cut (inner depth is longer then the
outer, equal to the thinkness of the wood), and the door goes on top.
I also found Blumotion 973A is an option.
Prices in the us - 14-15 USD/pair is well over the price here, which
is 2-3 USD for one hinge :)
WBR
Sonnich