Any one happen to have one of these handy work centres ?? I am trying to
track down a replacement stick on type ruler measuring thingy. I have tried
here in Australia, with no luck. So if i have to buy from you guys over the
the USA, then so be it.
Any one who could swap ideas too, would be appreciated.
Peter
Queensland, Australia
Peter
> Any one happen to have one of these handy work centres ?? I am trying to
> track down a replacement stick on type ruler measuring thingy. I have
> tried here in Australia, with no luck. So if i have to buy from you guys
> over the the USA, then so be it.
>
> Any one who could swap ideas too, would be appreciated.
Timebecon and Carbatec carry adhesive tapes
http://www.timbecon.com.au/details/adhesive-measuring-tape-8304.aspx
http://www.carbatec.com.au/kreg-adhesive-tapes_c20000
HTH
Steve
"Peter" <[email protected]> wrote in message
news:[email protected]...
> Any one happen to have one of these handy work centres ?? I am trying to
> track down a replacement stick on type ruler measuring thingy. I have
> tried here in Australia, with no luck. So if i have to buy from you guys
> over the the USA, then so be it.
http://www.tritontools.com/
"Peter" <[email protected]> wrote in message
news:[email protected]...
> Any one happen to have one of these handy work centres ?? I am trying to
> track down a replacement stick on type ruler measuring thingy. I have
> tried here in Australia, with no luck. So if i have to buy from you guys
> over the the USA, then so be it.
>
> Any one who could swap ideas too, would be appreciated.
>
> Peter
> Queensland, Australia
The bloke who started Trition sold out his operation to the yanks and is now
retired with millions
You will find it hard to get any replacement products from anywhere except
from a bloke in Gippsland somewhere,
Think it is Bairnsdale,
who has bought pallet loads of Triton stuff
I bought some biscuits from him a while ago but, I can't remember or even
find the receipt to let you know who it is
Try looking on ebay for triton stuff and you may find him
http://cgi.ebay.com.au/TRITON-MULTISTAND-RARE-BRAND-NEW-STOCK-/110582495277?pt=AU_Hardware&hash=item19bf3af82d
send him a message and ask him if he has what you want.
"Peter" <[email protected]> wrote in message
news:[email protected]...
> Any one happen to have one of these handy work centres ?? I am trying to
> track down a replacement stick on type ruler measuring thingy. I have
> tried here in Australia, with no luck. So if i have to buy from you guys
> over the the USA, then so be it.
http://www.tritontools.com/
On Sunday, 12 September 2010 18:40:35 UTC+10, Peter wrote:
> Any one happen to have one of these handy work centres ?? I am trying to
> track down a replacement stick on type ruler measuring thingy. I have tried
> here in Australia, with no luck. So if i have to buy from you guys over the
> the USA, then so be it.
>
> Any one who could swap ideas too, would be appreciated.
>
> Peter
> Queensland, Australia
I printed my own ruler on normal laser paper, stuck it down with double sided tape (the thin stuff). Then I coated it with clear two pack epoxy. works fine.
the PDf is here http://snk.to/f-ctiq70qi
I printed on a hp laser @ 1200 dpi, and it's accurate to at least 1 line thickness, which is better than my (old) eyes.!
hope someone finds this usefull.
Mark
On 9/12/2010 4:40 AM, Peter wrote:
> Any one happen to have one of these handy work centres ?? I am trying to
> track down a replacement stick on type ruler measuring thingy. I have tried
> here in Australia, with no luck. So if i have to buy from you guys over the
> the USA, then so be it.
>
> Any one who could swap ideas too, would be appreciated.
If you go to ebay australia and search on "sticky ruler" you'll find
some items that might do the job. I've never seen a Triton Mk 3 so
can't say for sure.