Have a neighbor that rescued a burned out tree.. what was left of it was
about 8' long and came from a pretty large tree. It appears to be a Fir,
judging from the grain. It has a lot of heavy charring on in as well as
some rot and bug infestation.. most of which may be old.
Anyhow, he wants to use it at his cabin to attach a property sign to. I
agreed it would look great. So, the question is..
How does he preserve this log? Doug fir will not hold up terribly long
without something to stave off the elements and bugs. He doesn't want the
"green" penta look.. but there must be some sort of penetrating liquid that
can be applied that will, with repeated applications, sink into the wood.
I'd expect he would have to scrape/brush off all the heavy char.. as well as
the areas that are rotted. Then what? What would be a good preservative?
Something similar to, but hopefully better than, Thompson's WaterSeal?
Thanks for any pointers..
--
Bill Splaine, Healdsburg, CA
Woodcarvings: www.picturetrail.com/chips
>
>I'd expect he would have to scrape/brush off all the heavy char.. as well as
>the areas that are rotted. Then what? What would be a good preservative?
>Something similar to, but hopefully better than, Thompson's WaterSeal?
Clean it up with an adze (or an ax) to bare, sound wood. Thin spar
varnish 50% and apply 3 coats, 24 hours between coats. Do NOT place in
ground contact - build a concrete footer (5 gal plastic can filled
with concrete) raised 2 - 3 inches above ground level.
Recoated every couple of years, it'll last "forever".
I am assuming that the wood is relatively dry, if it's totally green,
then you can expect warping and cracking, but it may not matter.
Regards.
An interesting proposition. I was wondering if its feasible to clean it up
and take it to a timber Company and get it tanalised. Don't know if they
have this process in the US or, if you do, what it might cost. If it is
feasible it may then even be possible to put directly into the ground.
Cheers
Bill D
New Zealand
"WeeWilly" <[email protected]> wrote in
news:[email protected]:
> Have a neighbor that rescued a burned out tree.. what was left of it
> was about 8' long and came from a pretty large tree. It appears to be
> a Fir, judging from the grain. It has a lot of heavy charring on in
> as well as some rot and bug infestation.. most of which may be old.
>
> Anyhow, he wants to use it at his cabin to attach a property sign to.
> I agreed it would look great. So, the question is..
>
> How does he preserve this log? Doug fir will not hold up terribly
> long without something to stave off the elements and bugs. He doesn't
> want the "green" penta look.. but there must be some sort of
> penetrating liquid that can be applied that will, with repeated
> applications, sink into the wood.
>
> I'd expect he would have to scrape/brush off all the heavy char.. as
> well as the areas that are rotted. Then what? What would be a good
> preservative? Something similar to, but hopefully better than,
> Thompson's WaterSeal?
>
> Thanks for any pointers..
>
Epoxy? Look into West System products. There's a good boat restorer in
Healdsburg, whose name escapes me right now, who could likely help you.
He's a member of Sonoma County Woodworkers, if that helps any...
Patriarch