Rw

Robatoy

07/10/2008 10:55 AM

Engineered flooring

My right-hand man, who shall remain nameless (Grant), is thinking of
doing his basement rec room in wood. Engineered is what we're told, so
far, what we should use.
Now, I know some of you are humidity and moisture savvy (read Houston).
Any brands, things to look for (or out for)?

TIA

r


This topic has 8 replies

FB

Frank Boettcher

in reply to Robatoy on 07/10/2008 10:55 AM

07/10/2008 11:52 AM

On Tue, 07 Oct 2008 10:31:56 -0500, Frank Boettcher
<[email protected]> wrote:

>On Tue, 07 Oct 2008 10:55:44 -0400, Robatoy
><[email protected]> wrote:
>

>
>I also installed about 300 feet of 2-7/8" wide, ......

excuse, me that is 2-1/8" which I guess was an industry standard for
many years...

Frank

DW

Doug Winterburn

in reply to Robatoy on 07/10/2008 10:55 AM

07/10/2008 3:10 PM

Robatoy wrote:
> My right-hand man, who shall remain nameless (Grant), is thinking of
> doing his basement rec room in wood. Engineered is what we're told, so
> far, what we should use.
> Now, I know some of you are humidity and moisture savvy (read Houston).
> Any brands, things to look for (or out for)?
>
> TIA
>
> r
I don't have any big humidity issues here in the Arizona desert, but I
did put down Bruce engineered flooring in my dinette area. I did the
floating method to get around a slab crack that kept breaking tiles.
This stuff is 3" wide and random lengths. I put it over a vapor barrier
with a thin foam attached.

It has been great for over two years and wears like iron.

EP

"Edwin Pawlowski"

in reply to Robatoy on 07/10/2008 10:55 AM

07/10/2008 9:47 PM


"Robatoy" <[email protected]> wrote in message
news:[email protected]...
> My right-hand man, who shall remain nameless (Grant), is thinking of
> doing his basement rec room in wood. Engineered is what we're told, so
> far, what we should use.
> Now, I know some of you are humidity and moisture savvy (read Houston).
> Any brands, things to look for (or out for)?
>
> TIA
>
> r

I've used Mannington and Scandian made in Brazil.
http://www.scandianindustries.com/
www.mannington.com

Both worked equally well. Both are very good quality. If below grade you
need a poly moisture barrier. I installed both as floating floors and they
went in easily and look great.

kk

krw

in reply to Robatoy on 07/10/2008 10:55 AM

09/10/2008 7:56 PM

In article <[email protected]>,
[email protected] says...
>
> "Robatoy" <[email protected]> wrote in message
> news:[email protected]...
> > My right-hand man, who shall remain nameless (Grant), is thinking of
> > doing his basement rec room in wood. Engineered is what we're told, so
> > far, what we should use.
> > Now, I know some of you are humidity and moisture savvy (read Houston).
> > Any brands, things to look for (or out for)?
> >
> > TIA
> >
> > r
>
> I put down a floating Maple engineered wood floor in our master bathroom
> about 5 years ago. It is holding up very well. Would I do it again in a
> bathroom? No. We don't like having to be very careful about water being
> spilled/dripped on the floor after a bath or shower. Anywhere else but the
> kitchen, fine. I don't recall the brand however I got it from HD, I
> seriously doubt it was a common name brand.

I used bamboo in the kitchen. I thought I'd have trouble with drips
from the ice maker and sink but it was fine. The only thing I
didn't like about it was the semi-gloss finish. It showed spots
pretty badly. No, I wouldn't use it in a bathroom. Tile is too
easy.


--
Keith

kk

krw

in reply to Robatoy on 07/10/2008 10:55 AM

09/10/2008 10:09 PM

In article <c5578d40-2eb3-474a-9b05-d9ab65ddcff7
@g61g2000hsf.googlegroups.com>, [email protected] says...
> On Oct 9, 8:56=A0pm, krw <[email protected]> wrote:
> > In article <[email protected]>,
> > [email protected] says...
> >
> >
> >
> >
> >
> > > "Robatoy" <[email protected]> wrote in message
> > >news:[email protected]...
> > > > My right-hand man, who shall remain nameless (Grant), is thinking o=
f
> > > > doing his basement rec room in wood. Engineered is what we're told,=
so
> > > > far, what we should use.
> > > > Now, I know some of you are humidity and moisture savvy (read Houst=
on).
> > > > Any brands, things to look for (or out for)?
> >
> > > > TIA
> >
> > > > r
> >
> > > I put down a floating Maple engineered wood floor in our master bathr=
oom
> > > about 5 years ago. =A0It is holding up very well. =A0Would I do it ag=
ain in a
> > > bathroom? =A0No. =A0We don't like having to be very careful about wat=
er being
> > > spilled/dripped on the floor after a bath or shower. =A0Anywhere else=
but the
> > > kitchen, fine. =A0I don't recall the brand however I got it from HD, =
I
> > > seriously doubt it was a common name brand.
> >
> > I used bamboo in the kitchen. =A0I thought I'd have trouble with drips
> > from the ice maker and sink but it was fine. =A0The only thing I
> > didn't like about it was the semi-gloss finish. =A0It showed spots
> > pretty badly. =A0No, I wouldn't use it in a bathroom. =A0Tile is too
> > easy.
> >
> > --
> > Keith
>=20
> I sure do like the looks of bamboo, but this is for my production
> manager...he's from Scotland...so wtf does he know about taste?


Bamboo is dirt cheap too. I went with it because it was cheaper,=20
including installation, than even a medium grade vinyl (that it=20
replaced). It looks far better. If I'd known how easy to put down=20
I would have done it myself. It would have taken a while but I=20
would have done a better job.

BTW, if you go with bamboo the vertical stuff is much nicer, IMO. I=20
have the horizontal in the great room and dining room of our new=20
place and don't like it nearly as well as the vertical carbonized=20
medium we had in our last home. Also, 6' boards look better than=20
the 3' and are only a little more expensive.

--=20
Keith

Lr

"Leon"

in reply to Robatoy on 07/10/2008 10:55 AM

08/10/2008 8:51 AM


"Robatoy" <[email protected]> wrote in message
news:[email protected]...
> My right-hand man, who shall remain nameless (Grant), is thinking of
> doing his basement rec room in wood. Engineered is what we're told, so
> far, what we should use.
> Now, I know some of you are humidity and moisture savvy (read Houston).
> Any brands, things to look for (or out for)?
>
> TIA
>
> r

I put down a floating Maple engineered wood floor in our master bathroom
about 5 years ago. It is holding up very well. Would I do it again in a
bathroom? No. We don't like having to be very careful about water being
spilled/dripped on the floor after a bath or shower. Anywhere else but the
kitchen, fine. I don't recall the brand however I got it from HD, I
seriously doubt it was a common name brand.

RC

Robatoy

in reply to Robatoy on 07/10/2008 10:55 AM

09/10/2008 6:00 PM

On Oct 9, 8:56=A0pm, krw <[email protected]> wrote:
> In article <[email protected]>,
> [email protected] says...
>
>
>
>
>
> > "Robatoy" <[email protected]> wrote in message
> >news:[email protected]...
> > > My right-hand man, who shall remain nameless (Grant), is thinking of
> > > doing his basement rec room in wood. Engineered is what we're told, s=
o
> > > far, what we should use.
> > > Now, I know some of you are humidity and moisture savvy (read Houston=
).
> > > Any brands, things to look for (or out for)?
>
> > > TIA
>
> > > r
>
> > I put down a floating Maple engineered wood floor in our master bathroo=
m
> > about 5 years ago. =A0It is holding up very well. =A0Would I do it agai=
n in a
> > bathroom? =A0No. =A0We don't like having to be very careful about water=
being
> > spilled/dripped on the floor after a bath or shower. =A0Anywhere else b=
ut the
> > kitchen, fine. =A0I don't recall the brand however I got it from HD, I
> > seriously doubt it was a common name brand.
>
> I used bamboo in the kitchen. =A0I thought I'd have trouble with drips
> from the ice maker and sink but it was fine. =A0The only thing I
> didn't like about it was the semi-gloss finish. =A0It showed spots
> pretty badly. =A0No, I wouldn't use it in a bathroom. =A0Tile is too
> easy.
>
> --
> Keith

I sure do like the looks of bamboo, but this is for my production
manager...he's from Scotland...so wtf does he know about taste?

FB

Frank Boettcher

in reply to Robatoy on 07/10/2008 10:55 AM

07/10/2008 10:31 AM

On Tue, 07 Oct 2008 10:55:44 -0400, Robatoy
<[email protected]> wrote:

>My right-hand man, who shall remain nameless (Grant), is thinking of
>doing his basement rec room in wood. Engineered is what we're told, so
>far, what we should use.
>Now, I know some of you are humidity and moisture savvy (read Houston).
>Any brands, things to look for (or out for)?
>
>TIA
>
>r

I used a Bruce engineered wood floor, adhesive installed on a
monolithic slab about 625 ft sq. about seven years ago, no issues, in
an area with lots of dew point differential.

I think the engineered floors are more temp, humidiy change tolerant.

I also installed about 300 feet of 2-7/8" wide, 3/4" thick solid oak
in my office upstairs. Local salvage company had a shed full of it.
When I finished the job the cost of flooring, nails, renting the
sander, finish materials, was less than $10/sq. yd. After running
those numbers I went back to buy the whole shed full, but it was gone.

Frank


You’ve reached the end of replies