I purchased a Rigid Drill-Impact driver kit from Home Depot the other day. While I've never owned an impact driver before, I have used them, but in just a "pick it up and use it" fashion.
The thing I noticed while inspecting the Rigid kit is that there is some run-out in the impact driver. The bits do not spin exactly in-line with the main axis, there is a bit (no pun intended) of a wobble.
I didn't have any problem driving some screws when I tested it, and it certainly drove them faster the the drill, but I don't know if the impact feature of the driver means that I should expect some run-out.
Yes or no?
Thanks!
On 3/6/2015 7:14 PM, John McCoy wrote:
> DerbyDad03 <[email protected]> wrote in
> news:[email protected]:
>
>> I purchased a Rigid Drill-Impact driver kit from Home Depot the other
>> day. While I've never owned an impact driver before, I have used them,
>> but in just a "pick it up and use it" fashion.
>>
>> The thing I noticed while inspecting the Rigid kit is that there is
>> some run-out in the impact driver. The bits do not spin exactly
>> in-line with the main axis, there is a bit (no pun intended) of a
>> wobble.
>>
>> I didn't have any problem driving some screws when I tested it, and it
>> certainly drove them faster the the drill, but I don't know if the
>> impact feature of the driver means that I should expect some run-out.
>
> I think some is reasonable for that type of tool. Both
> the nature of the chuck and the intermittant nature of
> the force applied to the bit would tend to make a wobble.
> Putting the bit on the screw is probably enough to damp
> out any extra motion.
>
> Note that this is one reason why you don't want to drill
> holes with an impact driver.
Actually there is no issues with drilling holes "in wood" with an
impact, I have done plenty. If you need precision hole drilling you
need a DP, not even a hand held drill will can one truly drive a hole at
a precise angle. While there is a bit of wobble with an impact driver a
drill bit pretty much guides it self straight once a hole is started.
DerbyDad03 <[email protected]> wrote in
news:[email protected]:
> I purchased a Rigid Drill-Impact driver kit from Home Depot the other
> day. While I've never owned an impact driver before, I have used them,
> but in just a "pick it up and use it" fashion.
>
> The thing I noticed while inspecting the Rigid kit is that there is
> some run-out in the impact driver. The bits do not spin exactly
> in-line with the main axis, there is a bit (no pun intended) of a
> wobble.
>
> I didn't have any problem driving some screws when I tested it, and it
> certainly drove them faster the the drill, but I don't know if the
> impact feature of the driver means that I should expect some run-out.
I think some is reasonable for that type of tool. Both
the nature of the chuck and the intermittant nature of
the force applied to the bit would tend to make a wobble.
Putting the bit on the screw is probably enough to damp
out any extra motion.
Note that this is one reason why you don't want to drill
holes with an impact driver.
John
(who's curious now to look at his and see if it has any)
On 3/6/2015 3:20 PM, DerbyDad03 wrote:
> I purchased a Rigid Drill-Impact driver kit from Home Depot the other day. While I've never owned an impact driver before, I have used them, but in just a "pick it up and use it" fashion.
>
> The thing I noticed while inspecting the Rigid kit is that there is some run-out in the impact driver. The bits do not spin exactly in-line with the main axis, there is a bit (no pun intended) of a wobble.
>
> I didn't have any problem driving some screws when I tested it, and it certainly drove them faster the the drill, but I don't know if the impact feature of the driver means that I should expect some run-out.
>
> Yes or no?
>
> Thanks!
>
That depends on how much.
I have very little in my Hitachi.
--
Jeff
On 3/6/2015 2:20 PM, DerbyDad03 wrote:
> I purchased a Rigid Drill-Impact driver kit from Home Depot the other day. While I've never owned an impact driver before, I have used them, but in just a "pick it up and use it" fashion.
>
> The thing I noticed while inspecting the Rigid kit is that there is some run-out in the impact driver. The bits do not spin exactly in-line with the main axis, there is a bit (no pun intended) of a wobble.
>
> I didn't have any problem driving some screws when I tested it, and it certainly drove them faster the the drill, but I don't know if the impact feature of the driver means that I should expect some run-out.
>
> Yes or no?
>
> Thanks!
>
Compared to a drill chuck, Impact drivers have a quick release chuck.
These do not grip the bit as tightly as a regular drill chuck.
Typically they are ball detent chucks that do have to have some play in
order for the bit to not jam. This is normal.
On 3/6/15 2:20 PM, DerbyDad03 wrote:
> I purchased a Rigid Drill-Impact driver kit from Home Depot the other
> day. While I've never owned an impact driver before, I have used
> them, but in just a "pick it up and use it" fashion.
>
> The thing I noticed while inspecting the Rigid kit is that there is
> some run-out in the impact driver. The bits do not spin exactly
> in-line with the main axis, there is a bit (no pun intended) of a
> wobble.
>
> I didn't have any problem driving some screws when I tested it, and
> it certainly drove them faster the the drill, but I don't know if the
> impact feature of the driver means that I should expect some
> run-out.
>
> Yes or no?
>
> Thanks!
>
I don't have any on mine. I would take it back for an exchange.
Home Depot is great about that.
--
-MIKE-
"Playing is not something I do at night, it's my function in life"
--Elvin Jones (1927-2004)
--
http://mikedrums.com
[email protected]
---remove "DOT" ^^^^ to reply