A couple of years ago I bought the Delta model 17-924 drill press mortising
attachment. Through a series of stupid human tricks I managed to break the
yoke and one of the "collars" that came with the attachment. It has 4
chisels, 1/4", 5/16", 3/8", 1/2". All are new and have never been used. I
looked at the Woodcraft site, and they sell for about $13+ each or a set of
4 was $42 I think. If anyone wants these as a set I'll sell them for
$30.00. Any takers? I'm located near Dallas, TX
Thanks....
I learned a trick from Darrell Peart, using the square chisels from a
mortiser as a hand tool for squaring up the end of mortises cut with a
router. Very handy to have around for that purpose. Can also be used
to square corners of rabbets.
On Aug 26, 1:19=A0pm, "Thomas" <[email protected]> wrote:
> A couple of years ago I bought the Delta model 17-924 drill press mortisi=
ng
> attachment. =A0Through a series of stupid human tricks I managed to break=
the
> yoke and one of the "collars" that came with the attachment. =A0It has 4
> chisels, 1/4", 5/16", 3/8", 1/2". =A0All are new and have never been used=
. =A0I
> looked at the Woodcraft site, and they sell for about $13+ each or a set =
of
> 4 was $42 I think. =A0If anyone wants these as a set I'll sell =A0them fo=
r
> $30.00. =A0Any takers? =A0I'm located near Dallas, TX
> Thanks....
On Aug 26, 4:26=A0pm, "SonomaProducts.com" <[email protected]> wrote:
> I learned a trick from Darrell Peart, using the square chisels from a
> mortiser as a hand tool for squaring up the end of mortises cut with a
> router.
or forstner bit! I will second this tip!! I used it on a recent
project (blanket chest). I got the tip from Darrell's book.
---
www.garagewoodworks.com
Very handy to have around for that purpose. Can also be used
> to square corners of rabbets.
>
> On Aug 26, 1:19=A0pm, "Thomas" <[email protected]> wrote:
>
>
>
> > A couple of years ago I bought the Delta model 17-924 drill press morti=
sing
> > attachment. =A0Through a series of stupid human tricks I managed to bre=
ak the
> > yoke and one of the "collars" that came with the attachment. =A0It has =
4
> > chisels, 1/4", 5/16", 3/8", 1/2". =A0All are new and have never been us=
ed. =A0I
> > looked at the Woodcraft site, and they sell for about $13+ each or a se=
t of
> > 4 was $42 I think. =A0If anyone wants these as a set I'll sell =A0them =
for
> > $30.00. =A0Any takers? =A0I'm located near Dallas, TX
> > Thanks....