I need an end vise, I would like a twin screw. Does anyone think this would work, to mount
two tail vise screws on the same end face, would it work well that way? Maybe buy two
bicycle sprocket gears, have the local machinist bore the centers to fit the shafts outside of
the mounting flanges, and weld them on. Any advise or ideas on this?
Alex
What a pain for minimal savings. Just get the Veritas and support a great
US based company, Lee Valley.
Brian.
"AAvK" <[email protected]> wrote in message
news:T8lld.93345$bk1.53913@fed1read05...
>
> I need an end vise, I would like a twin screw. Does anyone think this
would work, to mount
> two tail vise screws on the same end face, would it work well that way?
Maybe buy two
> bicycle sprocket gears, have the local machinist bore the centers to fit
the shafts outside of
> the mounting flanges, and weld them on. Any advise or ideas on this?
>
> Alex
>
>
"Tim" <[email protected]> wrote in message
news:[email protected]...
> It is a great company, but isn't it based in Canada? It isn't part of the
US yet...
Hehe, fine. North American based. :-) Still a rarity these days.
Brian.
"Brian" <[email protected]> wrote in message news:<[email protected]>...
> What a pain for minimal savings. Just get the Veritas and support a great
> US based company, Lee Valley.
It is a great company, but isn't it based in Canada? It isn't part of the US yet...
> What a pain for minimal savings. Just get the Veritas and support a great
> US based company, Lee Valley.
>
>
I was thinking of their LV tail vise screws because they are 2nd to the the least expensive
I can find on the 'net. Minimal savings? 32.50 x 2 = 65.00, bike gears 12.00 = 77.00,
machinist 20.00 = 97.00, chain 6.00 = 103.00 hardwood handle doweling xx.xx etc etc...
mounting nuts and bolts xx.xx jaw wood 15.00 to 30.00 on and on, you might be right.
But a PAIN? No, the creativity compensates for that.
Alex
On Sat, 13 Nov 2004 02:15:31 -0800, "AAvK" <[email protected]> wrote:
>
>I need an end vise, I would like a twin screw. Does anyone think this would work, to mount
>two tail vise screws on the same end face, would it work well that way? Maybe buy two
>bicycle sprocket gears, have the local machinist bore the centers to fit the shafts outside of
>the mounting flanges, and weld them on. Any advise or ideas on this?
>
>Alex
>
I don't see any theoretical reason this wouldn't work. One downside of this
approach is - unless you incorporate some method of disconnecting one sprocket
from the shaft - you have no convenient way to cant the vise jaws.
Another downside might be - and I haven't run any numbers, so I'm not certain
about this - when all is said and done, you may well have as much or more money
(and time) tied up in the home-designed vise as if you had bought one. I'm often
surprised to find out how much it costs me to "improve" on a commercially
available item, not counting the time invested.
Tom Veatch
Wichita, KS USA
> I don't see any theoretical reason this wouldn't work. One downside of this
> approach is - unless you incorporate some method of disconnecting one sprocket
> from the shaft - you have no convenient way to cant the vise jaws.
Now that is too true Tom, good point! Unless I use a chain breaker, that would
be inconvenient.
> Another downside might be - and I haven't run any numbers, so I'm not certain
> about this - when all is said and done, you may well have as much or more money
> (and time) tied up in the home-designed vise as if you had bought one. I'm often
> surprised to find out how much it costs me to "improve" on a commercially
> available item, not counting the time invested.
That I answered in reply to Brian's reply. Very true point as well.
> Tom Veatch
> Wichita, KS USA
On Sat, 13 Nov 2004 21:39:56 -0800, "Brian" <[email protected]>
wrote:
>
>"Tim" <[email protected]> wrote in message
>news:[email protected]...
>
>> It is a great company, but isn't it based in Canada? It isn't part of the
>US yet...
>
>
>Hehe, fine. North American based. :-) Still a rarity these days.
>
>Brian.
>
I think most companies are N. American based... we just won't pay what
it costs for them to sell American made tools..