These are the parts I need
980756-001 - Blade cover - to enclose blade for dust collection - you need 1
STD511003 - Screw - to attach blade cover and elbow- you need 6
980759-001 - Flap - part of blade cover - you need 1
980758-001 - Push nuts - to attach flap to blade cover - you need 4
980946-001 - Washer - for screw onto elbow to dust port - you need 1
980760-001 - Elbow - to deflect dust down - you need 1
Yes I know they are 17 year old parts and I am looking for a needle in a hay stack BUT it can't hurt to ask.
Thank you for any help anyone may have.
Douglas - fellow wood worker
In article <[email protected]>,
<[email protected]> wrote:
> These are the parts I need
> 980756-001 - Blade cover - to enclose blade for dust collection - you need 1
No longer available from original manufacturer
> STD511003 - Screw - to attach blade cover and elbow- you need 6
http://www.searspartsdirect.com/part/search.html?q=STD511003 in stock
> 980759-001 - Flap - part of blade cover - you need 1
No longer available from original manufacturer
> 980758-001 - Push nuts - to attach flap to blade cover - you need 4
No longer available from original manufacturer
> 980946-001 - Washer - for screw onto elbow to dust port - you need 1
http://www.searspartsdirect.com/part-number/980946-001/0009/315.html?pat
hTaken=partSearch&q=980946-001 in stock
> 980760-001 - Elbow - to deflect dust down - you need 1
http://www.searspartsdirect.com/part-number/980760-001/0009/315.html?pat
hTaken=partSearch&q=980760-001 in stock
>
> Yes I know they are 17 year old parts and I am looking for a needle in a hay
> stack BUT it can't hurt to ask.
>
> Thank you for any help anyone may have.
>
> Douglas - fellow wood worker
If I understand your post correctly, the 315 series is probably manufactured by Ryobi...As mentioned by others, compatible parts most likely can be found thru a little detective work...
Good luck
On Thursday, January 7, 2016 at 7:08:46 AM UTC-5, Just Another Joe wrote:
> In article <[email protected]>,
> <[email protected]> wrote:
>
> > These are the parts I need
>
>
> > 980756-001 - Blade cover - to enclose blade for dust collection - you need 1
>
> No longer available from original manufacturer
>
>
>
> > STD511003 - Screw - to attach blade cover and elbow- you need 6
>
> http://www.searspartsdirect.com/part/search.html?q=STD511003 in stock
>
>
>
> > 980759-001 - Flap - part of blade cover - you need 1
>
> No longer available from original manufacturer
>
>
>
> > 980758-001 - Push nuts - to attach flap to blade cover - you need 4
>
> No longer available from original manufacturer
>
>
>
> > 980946-001 - Washer - for screw onto elbow to dust port - you need 1
>
> http://www.searspartsdirect.com/part-number/980946-001/0009/315.html?pat
> hTaken=partSearch&q=980946-001 in stock
>
>
>
> > 980760-001 - Elbow - to deflect dust down - you need 1
>
> http://www.searspartsdirect.com/part-number/980760-001/0009/315.html?pat
> hTaken=partSearch&q=980760-001 in stock
>
>
> >
> > Yes I know they are 17 year old parts and I am looking for a needle in a hay
> > stack BUT it can't hurt to ask.
> >
> > Thank you for any help anyone may have.
> >
> > Douglas - fellow wood worker
On 1/6/2016 6:15 PM, [email protected] wrote:
> These are the parts I need
> 980756-001 - Blade cover - to enclose blade for dust collection - you need 1
> STD511003 - Screw - to attach blade cover and elbow- you need 6
> 980759-001 - Flap - part of blade cover - you need 1
> 980758-001 - Push nuts - to attach flap to blade cover - you need 4
> 980946-001 - Washer - for screw onto elbow to dust port - you need 1
> 980760-001 - Elbow - to deflect dust down - you need 1
>
> Yes I know they are 17 year old parts and I am looking for a needle in a hay stack BUT it can't hurt to ask.
>
> Thank you for any help anyone may have.
>
> Douglas - fellow wood worker
>
Screws, nuts and washers can be easily purchased at your local hardware
store. The specialty parts may be interchangeable with other table saw
brands or newer Craftsman models.
I did my own search and couldn't find any photos of the parts you need,
but even if you found something close, you couldn't possibly modify it
to work.
On Wed, 6 Jan 2016 15:15:41 -0800 (PST)
[email protected] wrote:
> Yes I know they are 17 year old parts and I am looking for a needle
> in a hay stack BUT it can't hurt to ask.
best bet is to find one of these saws and buy it for parts