Last week I was in a store that sold overpriced crafts. They
displayed wooden pens and the typical turned items, but they also had
a waiter style corkscrew - hinged screw and hinged lever to help
remove the cork. The usual metal handle was covered with beautiful
wood. I haven't been able to find the unfinished corkscrew. Anyone
know where the basic kit is available?
I guess that would give me a little flexibility on design and allow me
to pick up something of better quality than I would probably find in a
kit. It's an extra step but...
On Thu, 7 Jul 2011 23:09:07 -0400, "Ed Pawlowski" <[email protected]>
wrote:
>
>"DLG" <[email protected]> wrote in message
>news:[email protected]...
>> Last week I was in a store that sold overpriced crafts. They
>> displayed wooden pens and the typical turned items, but they also had
>> a waiter style corkscrew - hinged screw and hinged lever to help
>> remove the cork. The usual metal handle was covered with beautiful
>> wood. I haven't been able to find the unfinished corkscrew. Anyone
>> know where the basic kit is available?
>
>You may find it just as cheap to buy a good one and take it apart.
On 7/11/2011 1:19 PM, DLG wrote:
> Thanks - I've seen that style, but it sometimes requires brute
> strength to pull a cork with those - and often ends up with wine
> splashed around. What got my attention was one made like this link -
> the style your waiter (excuse me "server") would use in a restaurant.
> The one I saw was almost certainly made in someone's workshop because
> all the items around it looked like a display a WoodCraft.
>
> http://www.amazon.com/Franmara-Cepage-Laguiole-Waiters-Corkscrew/dp/B0043DIXX6
>
Like!
I'm very particular about my wine corkscrews (much more so than my wine)
and that is the style I prefer.
I've had a less elaborate one made by Christian Brothers for almost a
half century and woe betide the guest who finds it, uses it, and doesn't
put it back where it belongs ... the inmates around here know better
than to touch it! :)
Be sure you post a followup if you find the parts. Thanks.
--
www.e-woodshop.net
Last update: 4/15/2010
KarlC@ (the obvious)
In article <[email protected]>,
[email protected] says...
>
> On 7/11/2011 11:19 AM, DLG wrote:
> > Thanks - I've seen that style, but it sometimes requires brute
> > strength to pull a cork with those - and often ends up with wine
> > splashed around. What got my attention was one made like this link -
> > the style your waiter (excuse me "server") would use in a restaurant.
> > The one I saw was almost certainly made in someone's workshop because
> > all the items around it looked like a display a WoodCraft.
> >
> > http://www.amazon.com/Franmara-Cepage-Laguiole-Waiters-Corkscrew/dp/B0043DIXX6
>
> Lee Valley has a full corkscrew (with handle not a kit) for $11.50.
>
> http://www.leevalley.com/US/garden/page.aspx?p=65949&cat=2,40733,40734
Finding a waiter's corkscrew is not difficult. They're common
department store items. He's looking for one that has the metal parts
and for which he can provide his own handcrafted scales.
"DLG" <[email protected]> wrote in message
news:[email protected]...
> Last week I was in a store that sold overpriced crafts. They
> displayed wooden pens and the typical turned items, but they also had
> a waiter style corkscrew - hinged screw and hinged lever to help
> remove the cork. The usual metal handle was covered with beautiful
> wood. I haven't been able to find the unfinished corkscrew. Anyone
> know where the basic kit is available?
You may find it just as cheap to buy a good one and take it apart.
DLG wrote:
> Thanks - I've seen that style, but it sometimes requires brute
> strength to pull a cork with those - and often ends up with wine
> splashed around. What got my attention was one made like this link -
> the style your waiter (excuse me "server") would use in a restaurant.
> The one I saw was almost certainly made in someone's workshop because
> all the items around it looked like a display a WoodCraft.
>
> http://www.amazon.com/Franmara-Cepage-Laguiole-Waiters-Corkscrew/dp/B0043DIXX6
Neat. It's got a knife for opening wine that comes in a box!
Thanks - I've seen that style, but it sometimes requires brute
strength to pull a cork with those - and often ends up with wine
splashed around. What got my attention was one made like this link -
the style your waiter (excuse me "server") would use in a restaurant.
The one I saw was almost certainly made in someone's workshop because
all the items around it looked like a display a WoodCraft.
http://www.amazon.com/Franmara-Cepage-Laguiole-Waiters-Corkscrew/dp/B0043DIXX6
On 7/11/2011 11:19 AM, DLG wrote:
> Thanks - I've seen that style, but it sometimes requires brute
> strength to pull a cork with those - and often ends up with wine
> splashed around. What got my attention was one made like this link -
> the style your waiter (excuse me "server") would use in a restaurant.
> The one I saw was almost certainly made in someone's workshop because
> all the items around it looked like a display a WoodCraft.
>
> http://www.amazon.com/Franmara-Cepage-Laguiole-Waiters-Corkscrew/dp/B0043DIXX6
Lee Valley has a full corkscrew (with handle not a kit) for $11.50.
http://www.leevalley.com/US/garden/page.aspx?p=65949&cat=2,40733,40734
Dan