"Steve Turner" wrote:
> It never ceases to amaze me how many different ways people answer
> this question, and they're always wrong. The answer is simple; a
> filing cabinet with hanging file folders, and a separate folder for
> each grit. Duh. :-)
--------------------------------
Must have missed this one.
"Keith Nuttle" wrote:
>A simple question: How do you store your sandpaper in your workshop.
1) File folders in a cardboard box.
2) Drawer in a filing cabinet.
Lew
"Steve Turner" wrote:
> Actually Lew I did see that and I almost stopped at your post and
> gave you the gold star, but there were 20 others left to read and by
> the time I made it to the end I'd forgotten about ya. :-)
--------------------------------
That works.....................
...................
...............
This time<G>.
Lew
Keith Nuttle <[email protected]> wrote in news:hkmgt2$5rl$2
@speranza.aioe.org:
> A simple question: How do you store your sandpaper in your workshop.
>
> Drawers? bins? lay where ever there is a flat space?
I just put it down and it lays there thanks to gravity. That's how I store
it.
Oh WHERE do I store it? Well, the stuff for the mouse is sharing space in
the router bits drawer, the 5" disk sander paper is in the drawers below
the sander, and the sheets are in a bin next to a half sheet sander.
Puckdropper
Look up "file caddy" on Google. Lots of choices. I use one a bit
like this:
<http://www.amazon.com/dp/B001874MMQ/ref=asc_df_B001874MMQ1024175?smid=ATVPDKIKX0DER&tag=shopzilla_rev_265-20&linkCode=asn&creative=380341&creativeASIN=B001874MMQ>
--
______________________________
Keep the whole world singing . . . .
DanG (remove the sevens)
[email protected]
"Keith Nuttle" <[email protected]> wrote in message
news:[email protected]...
>A simple question: How do you store your sandpaper in your
>workshop.
>
> Drawers? bins? lay where ever there is a flat space?
On Feb 7, 6:57=A0am, Keith Nuttle <[email protected]> wrote:
> A simple question: How do you store your sandpaper in your workshop.
Old accordion file.
http://images.manufactum.de/manufactum/grossbild/36979_1.jpg
On Feb 7, 5:57=A0am, Keith Nuttle <[email protected]> wrote:
> A simple question: How do you store your sandpaper in your workshop.
>
> Drawers? bins? lay where ever there is a flat space?
top of a mechanic's red steel tool cabinet where the top opens.
Usually in its original packaging.
On Sun, 07 Feb 2010 08:57:54 -0500, Keith Nuttle
<[email protected]> wrote:
>A simple question: How do you store your sandpaper in your workshop.
>
>Drawers? bins? lay where ever there is a flat space?
How about all over the blasted shop so I can play "what grit is that?"
and "where are those H&L disks?" whenever I want to sand something?
--
"We need to make a sacrifice to the gods, find me a young virgin... oh, and bring something to kill"
Tim Douglass
http://www.DouglassClan.com
"Ed Pawlowski" <[email protected]> wrote in message
news:[email protected]...
>
>
> "Keith Nuttle" <[email protected]> wrote in message
> news:[email protected]...
>> A simple question: How do you store your sandpaper in your workshop.
>>
>> Drawers? bins? lay where ever there is a flat space?
>
> Drawer in the original package. Never saw the need for an exotic
> "solution"
In a cupboard in the original dispenser cardboard boxes that 50 packs are
sold in.
On Sun, 07 Feb 2010 08:57:54 -0500, Keith Nuttle
<[email protected]> wrote:
>A simple question: How do you store your sandpaper in your workshop.
>
>Drawers? bins? lay where ever there is a flat space?
I stack mine on a metal shelf with a thick piece of MDF on top to
minimize curling.
-Zz
On Feb 7, 9:44=A0am, RonB <[email protected]> wrote:
> On Feb 7, 7:57=A0am, Keith Nuttle <[email protected]> wrote:
>
> > A simple question: How do you store your sandpaper in your workshop.
>
> > Drawers? bins? lay where ever there is a flat space?
>
> Currently "piled" in a small cabinet that supports my oscillating
> spindle sander. =A0I am planning to build a rack on the will accept
> sheets, spindle sleeves and belts. =A0Been planning that rack for a few
> years - otta be good when it happens :^}
>
> RonB
or "...on the wall to accept..."
Keith Nuttle <[email protected]> writes:
>A simple question: How do you store your sandpaper in your workshop.
>
>Drawers? bins? lay where ever there is a flat space?
A nice hardware store 3M sandpaper rack I picked up
20 years ago at an out of business sale. All metal
and comes with built-in pegboard hangers.
scott
On Feb 7, 7:57=A0am, Keith Nuttle <[email protected]> wrote:
> A simple question: How do you store your sandpaper in your workshop.
>
> Drawers? bins? lay where ever there is a flat space?
Currently "piled" in a small cabinet that supports my oscillating
spindle sander. I am planning to build a rack on the will accept
sheets, spindle sleeves and belts. Been planning that rack for a few
years - otta be good when it happens :^}
RonB
On Feb 7, 10:39=A0am, Keith Nuttle <[email protected]> wrote:
> On 2/7/2010 11:48 AM, Neil Brooks wrote:
>
> > On Feb 7, 6:57 am, Keith Nuttle<[email protected]> =A0wrote:
> >> A simple question: How do you store your sandpaper in your workshop.
>
> > Old accordion file.
>
> >http://images.manufactum.de/manufactum/grossbild/36979_1.jpg
>
> I like the accordion file idea. =A0Do you then keep it in a drawer or on =
a
> bookshelf?
>
> I wonder if you could someway attach it to a pegboard, so that when you
> wanted it it would sort of fall open?
It's on the lower shelf of my workbench.
If I were just a *wee bit* more anal, I'd have it filed by grit.
But ... it'd be pretty easy to attach to pegboard, even if you had to
reinforce the back panel, and add some sort of cleat to secure it
properly.
On Feb 7, 7:57=A0am, Keith Nuttle <[email protected]> wrote:
I use a drawer.
On 2/7/2010 11:48 AM, Neil Brooks wrote:
> On Feb 7, 6:57 am, Keith Nuttle<[email protected]> wrote:
>> A simple question: How do you store your sandpaper in your workshop.
>
> Old accordion file.
>
> http://images.manufactum.de/manufactum/grossbild/36979_1.jpg
I like the accordion file idea. Do you then keep it in a drawer or on a
bookshelf?
I wonder if you could someway attach it to a pegboard, so that when you
wanted it it would sort of fall open?
On 2/7/10 7:57 AM, Keith Nuttle wrote:
> A simple question: How do you store your sandpaper in your workshop.
>
> Drawers? bins? lay where ever there is a flat space?
I found some plastic paper tray drawers at a thrift store and they work
very nicely.
Six trays, 3x3, and they seem to have tabs for stacking another set on
top.
Office supply or thrift stores.
--
-MIKE-
"Playing is not something I do at night, it's my function in life"
--Elvin Jones (1927-2004)
--
http://mikedrums.com
[email protected]
---remove "DOT" ^^^^ to reply
On 2/7/10 3:05 PM, DanG wrote:
> Look up "file caddy" on Google. Lots of choices. I use one a bit
> like this:
> <http://www.amazon.com/dp/B001874MMQ/ref=asc_df_B001874MMQ1024175?smid=ATVPDKIKX0DER&tag=shopzilla_rev_265-20&linkCode=asn&creative=380341&creativeASIN=B001874MMQ>
>
Yep, that's similar to what I have. Works great.
--
-MIKE-
"Playing is not something I do at night, it's my function in life"
--Elvin Jones (1927-2004)
--
http://mikedrums.com
[email protected]
---remove "DOT" ^^^^ to reply
On 2/7/2010 7:57 AM, Keith Nuttle wrote:
> A simple question: How do you store your sandpaper in your workshop.
>
> Drawers? bins? lay where ever there is a flat space?
It never ceases to amaze me how many different ways people answer this
question, and they're always wrong. The answer is simple; a filing cabinet
with hanging file folders, and a separate folder for each grit. Duh. :-)
--
"Our beer goes through thousands of quality Czechs every day."
(From a Shiner Bock billboard I saw in Austin some years ago)
To reply, eat the taco.
http://www.flickr.com/photos/bbqboyee/
On 2/7/2010 10:02 PM, Lew Hodgett wrote:
> "Steve Turner" wrote:
>
>> It never ceases to amaze me how many different ways people answer
>> this question, and they're always wrong. The answer is simple; a
>> filing cabinet with hanging file folders, and a separate folder for
>> each grit. Duh. :-)
> --------------------------------
> Must have missed this one.
>
> "Keith Nuttle" wrote:
>
>> A simple question: How do you store your sandpaper in your workshop.
>
> 1) File folders in a cardboard box.
>
> 2) Drawer in a filing cabinet.
>
> Lew
Actually Lew I did see that and I almost stopped at your post and gave you the
gold star, but there were 20 others left to read and by the time I made it to
the end I'd forgotten about ya. :-)
--
See Nad. See Nad go. Go Nad!
To reply, eat the taco.
http://www.flickr.com/photos/bbqboyee/
Keith Nuttle wrote:
> A simple question: How do you store your sandpaper in your workshop.
>
> Drawers? bins? lay where ever there is a flat space?
I made a "container"...maybe 15" high, 1/4" ply or hardboard shelves every
inch or so. Shelf width is slightly wider than sandpaper, depth is about
1/2" less so paper overhangs a bit. Each shelf has a different grit or
type. The "container" is in a cabinet.
--
dadiOH
____________________________
dadiOH's dandies v3.06...
...a help file of info about MP3s, recording from
LP/cassette and tips & tricks on this and that.
Get it at http://mysite.verizon.net/xico
Bought a plastic case that would hold 10 - 15 file folders.
Labeled a folder with the grit number. Done. Then added folders as
I needed additional grits.
Also included folder to hold tack cloth both used and unused.
Keith Nuttle wrote:
> A simple question: How do you store your sandpaper in your workshop.
>
> Drawers? bins? lay where ever there is a flat space?
"Nonny" <[email protected]> writes:
Nonny
> ELOQUIDIOT (n) A highly educated, sophisticated,
> and articulate person who has absolutely no clue
> concerning what they are talking about.
> The person is typically a media commentator or politician.
Sounds a lot like our current president... ;)
"Keith Nuttle" <[email protected]> wrote in message
news:[email protected]...
> A simple question: How do you store your sandpaper in your workshop.
>
> Drawers? bins? lay where ever there is a flat space?
Drawer in the original package. Never saw the need for an exotic "solution"
> Keith Nuttle wrote:
>> A simple question: How do you store your sandpaper in your workshop.
I've got them all stacked in increasing fineness order on part of a single
shelf in one of my cabinets. Partially used sheets are on top of the
stack. It's worked for years and since most of my finishing prep now
consists of planes and scrapers, the sandpaper doesn't get much use.
--
There is never a situation where having more rounds is a disadvantage
Rob Leatham
"dadiOH" <[email protected]> wrote in message
news:[email protected]...
> Keith Nuttle wrote:
>> A simple question: How do you store your sandpaper in your
>> workshop.
>>
>> Drawers? bins? lay where ever there is a flat space?
>
> I made a "container"...maybe 15" high, 1/4" ply or hardboard
> shelves every inch or so. Shelf width is slightly wider than
> sandpaper, depth is about 1/2" less so paper overhangs a bit.
> Each shelf has a different grit or type. The "container" is in
> a cabinet.
I just posted a photo of the one I did long ago. They sound about
the same. It was a great way to use up scraps and got a LOT of
use.
--
Nonny
ELOQUIDIOT (n) A highly educated, sophisticated,
and articulate person who has absolutely no clue
concerning what they are talking about.
The person is typically a media commentator or politician.
"Keith Nuttle" <[email protected]> wrote in message
news:[email protected]...
>A simple question: How do you store your sandpaper in your workshop.
>
> Drawers? bins? lay where ever there is a flat space?
For 30 years in the original packaging.