"Seeker" <[email protected]> wrote in message
news:[email protected]...
> http://www.industrialabrasives.com/index.html
>
>
Key word: Industrial Abrasives They don't seem to care about us home
users.
I just looked and cannot find the 5 hole or 8 hold hook and loop 5" or 6"
disks that most of us use.
.
Ed Pawlowski notes:
>"Seeker" <[email protected]> wrote in message
>news:[email protected]...
>
>> http://www.industrialabrasives.com/index.html
>>
>>
>
>Key word: Industrial Abrasives They don't seem to care about us home
>users.
>
>I just looked and cannot find the 5 hole or 8 hold hook and loop 5" or 6"
>disks that most of us use.
>.
Try www.supergrit.com
Charlie Self
"I have always felt that a politician is to be judged by the animosities he
excites among his opponents." Sir Winston Churchill
"Seeker" <[email protected]> wrote in message
news:[email protected]...
>
> If you're to lazy to locate those products, then I must assume you have
> your
> food spoon fed to you. 5",6"- 5 hole 8 hole whatever they are all there,
> Rhynogrip is the manufacturer.
OK, I found them. Not very intuitive is it? They should take a look at how
they describe stuff. At my local stores and other web pages, h&l is usually
under h&l.
I'm sorry you have gotten such a run around. Here is the absolute
best source:
http://www.klingspor.com/
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Keep the whole world singing . . . .
DanG (remove the sevens)
[email protected]
"Rumpty" <[email protected]> wrote in message
news:[email protected]...
> Your favorite web place to purchase sand paper/materials
> is??????????
>
> --
>
> Rumpty
>
> Radial Arm Saw Forum:
> http://forums.delphiforums.com/woodbutcher/start
>
> - - - - - - - - - - - - - - - - - - - - -
>
>
>
>
I order mine on line or at the woodshows from Royce Sales
www.sandpaper.ca they ship to the U.S.
Rick
"Rumpty" <[email protected]> wrote in message
news:[email protected]...
> Your favorite web place to purchase sand paper/materials is??????????
>
> --
>
> Rumpty
>
> Radial Arm Saw Forum: http://forums.delphiforums.com/woodbutcher/start
>
> - - - - - - - - - - - - - - - - - - - - -
>
>
>
>
"Seeker" <[email protected]> wrote in message
news:[email protected]...
>
> If you're to lazy to locate those products, then I must assume you have
> your
> food spoon fed to you. 5",6"- 5 hole 8 hole whatever they are all there,
> Rhynogrip is the manufacturer.
Who are you replying to? If you meant me, I can find a hundred sources, but
not at the web site that was given.
Ed
>OK, I found them. Not very intuitive is it? They should take a look at
how
they describe stuff. At my local stores and other web pages, h&l is usually
under h&l.
Ed,
I've been to Industrial Abrasives factory office and they are a bit "behind
times" in their sales effort (web page/catalog), but I use some of their
products and their service/product is fine.
--
Rumpty
Radial Arm Saw Forum: http://forums.delphiforums.com/woodbutcher/start
- - - - - - - - - - - - - - - - - - - - -
"Edwin Pawlowski" <[email protected]> wrote in message
news:[email protected]...
>
>
> "Seeker" <[email protected]> wrote in message
> news:[email protected]...
> >
> > If you're to lazy to locate those products, then I must assume you have
> > your
> > food spoon fed to you. 5",6"- 5 hole 8 hole whatever they are all there,
> > Rhynogrip is the manufacturer.
>
> OK, I found them. Not very intuitive is it? They should take a look at
how
> they describe stuff. At my local stores and other web pages, h&l is
usually
> under h&l.
>
>
On Sat, 04 Sep 2004 15:56:01 -0700, Father Haskell
<[email protected]> wrote:
>I make my own, thank you very much.
I prefer the organic stuff, so I grow it (horsetails)
>I'm sorry you have gotten such a run around. Here is the absolute
best source:
Run around? Naw, just good exercise from the folks who read the wreck!
FWIW I use both Industrial Abrasives and Klingspor.
Thanks for the suggestions folks!
--
Rumpty
Radial Arm Saw Forum: http://forums.delphiforums.com/woodbutcher/start
- - - - - - - - - - - - - - - - - - - - -
"DanG" <[email protected]> wrote in message
news:Pbr_c.19496$Ka6.5681@okepread03...
> I'm sorry you have gotten such a run around. Here is the absolute
> best source:
>
> http://www.klingspor.com/
>
> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
> Keep the whole world singing . . . .
> DanG (remove the sevens)
> [email protected]
>
>
>
> "Rumpty" <[email protected]> wrote in message
> news:[email protected]...
> > Your favorite web place to purchase sand paper/materials
> > is??????????
> >
> > --
> >
> > Rumpty
> >
> > Radial Arm Saw Forum:
> > http://forums.delphiforums.com/woodbutcher/start
> >
> > - - - - - - - - - - - - - - - - - - - - -
> >
> >
> >
> >
>
>