I'm in the market for an inexpensive floor model drill press and have
narrowed my selection down to the Grizzly G7944 (ready some good things
about it here in the Wreck) and the Ridgid DP1550 (good review in FWW). I
was wondering if anyone has any comments on the Hitachi B16RM sold at Lowes?
Thanks for any input.
--
John
"Jay Pique" <[email protected]> wrote in message
news:[email protected]...
> Anyone out there ever cut wood with one of these?
>
Sure wood can be cut with a water jet. So can stone, stainless, etc.
The problem comes in when you need to buy the machine, it makes the scroll
saw a lot more attractive.
--
Roger Shoaf
About the time I had mastered getting the toothpaste back in the tube, then
they come up with this striped stuff.
"Patriarch" <[email protected]> wrote in message
news:WRfBd.261639$5K2.156383@attbi_s03...
> Jay Pique <[email protected]> wrote in
> news:[email protected]:
>
> > Anyone out there ever cut wood with one of these?
> >
> > JP
>
> So, Jay, help me understand. After spending several years air-drying
> hardwood, why would you want to use a water jet cutter?
>
> Patriarch
Because you can make intricate cuts exactly where you want them with a kerf
finer than any blade could produce without regard to gnarly grain or knots.
--
Roger Shoaf
About the time I had mastered getting the toothpaste back in the tube, then
they come up with this striped stuff.
On Fri, 31 Dec 2004 02:11:02 -0500, Jay Pique <[email protected]> wrote:
>Anyone out there ever cut wood with one of these?
not sure if you would want too as the water and grit may screw up the wood or
your finish. if it is thin it can be laser cut.
I got my sign cut with a water jet it is pretty cool.
--
Knight-Toolworks & Custom Planes
Custom made wooden planes at reasonable prices
See http://www.knight-toolworks.com For prices and ordering instructions.
Jay Pique <[email protected]> wrote in
news:[email protected]:
> Anyone out there ever cut wood with one of these?
>
> JP
So, Jay, help me understand. After spending several years air-drying
hardwood, why would you want to use a water jet cutter?
Patriarch
"Jay Pique" <[email protected]> wrote in message
news:[email protected]...
> On Fri, 31 Dec 2004 17:19:38 GMT, Patriarch
> <[email protected]> wrote:
>
>>Jay Pique <[email protected]> wrote in
>>news:[email protected]:
>>
>>> Anyone out there ever cut wood with one of these?
>>>
>>> JP
yes. http://www.precisionhydrojet.com/portfolio.html
>>So, Jay, help me understand. After spending several years air-drying
>>hardwood, why would you want to use a water jet cutter?
>
> I'm not sure I would, I'm just looking for information. Right now I
> haven't any plans or resources to purchase a water jet, but a couple
> of attributes make it sound appealing.
>
> It's dust free, doesn't require sharpening and makes very
> narrow-kerfed cuts. Of course there are numerous disadvantages as
> well - like initial cost, quality of cut (maybe), cost of abrasive
> additives, filtration of water, etc....
>
> Are they noisy? Can you straight line rip on them? Are they better
> than SawStop?!
>
they are VERY loud. yes you can rip on them. you cannot attach a sawstop(tm)
to them as they have no physical connection to a blade so there would be
nothing to sense.
and the starting price on them is around $250k.
> JP
regards,
charlie
cave creek, az
On Fri, 31 Dec 2004 17:19:38 GMT, Patriarch
<[email protected]> wrote:
>Jay Pique <[email protected]> wrote in
>news:[email protected]:
>
>> Anyone out there ever cut wood with one of these?
>>
>> JP
>
>So, Jay, help me understand. After spending several years air-drying
>hardwood, why would you want to use a water jet cutter?
I'm not sure I would, I'm just looking for information. Right now I
haven't any plans or resources to purchase a water jet, but a couple
of attributes make it sound appealing.
It's dust free, doesn't require sharpening and makes very
narrow-kerfed cuts. Of course there are numerous disadvantages as
well - like initial cost, quality of cut (maybe), cost of abrasive
additives, filtration of water, etc....
Are they noisy? Can you straight line rip on them? Are they better
than SawStop?!
JP
That is a function of how thick, how hard the material, how competent the
operator and how much pressure your machine has.
"John T" <[email protected]> wrote in message
news:[email protected]...
> Maybe wood is somehow different, but all the waterjet cuts I've seen in
> thicker materials (over 3/4 or 1") start showing a wider, rougher kerf
> at the bottom.
>
On Sat, 13 Nov 2004 09:25:55 -0500, "John" <[email protected]>
wrote:
>I'm in the market for an inexpensive floor model drill press and have
>narrowed my selection down to the Grizzly G7944 (ready some good things
>about it here in the Wreck) and the Ridgid DP1550 (good review in FWW). I
>was wondering if anyone has any comments on the Hitachi B16RM sold at Lowes?
>
>Thanks for any input.
The shop I am working in now has a water jet. Any place I had been before,
we sent that work out so I only know this one machine. Yes, it is LOUD. The
operator wears earplugs. I am often on the lathe about ten feet away. I
don't need earplugs but I can't hear my machine. Annoying.
"Jay Pique" <[email protected]> wrote in message
news:[email protected]...
> I'm not sure I would, I'm just looking for information. Right now I
> haven't any plans or resources to purchase a water jet, but a couple
> of attributes make it sound appealing.
>
> It's dust free, doesn't require sharpening and makes very
> narrow-kerfed cuts. Of course there are numerous disadvantages as
> well - like initial cost, quality of cut (maybe), cost of abrasive
> additives, filtration of water, etc....
>
> Are they noisy? Can you straight line rip on them? Are they better
> than SawStop?!
>
> JP
"Roger Shoaf" <[email protected]> wrote in message
news:[email protected]...
>>
>> So, Jay, help me understand. After spending several years air-drying
>> hardwood, why would you want to use a water jet cutter?
>>
>> Patriarch
>
> Because you can make intricate cuts exactly where you want them with a
> kerf
> finer than any blade could produce without regard to gnarly grain or
> knots.
I think you missed his point. Using water on dried wood tends to make it
absorb water and swell. When it eventually dries out the cut will not be as
nice looking.