While poking around looking for something completely unrelated, I
found this:
http://blog.makezine.com/archive/2009/08/wooden_flashlight.html
Looks no harder than a salt/pepper grinder, but a lot cooler and more
useful.
You could play around with the idea and make all kinds of single- and
multi-cell or multi-bulbe flashlights. Or even use LEDs.
"J. Clarke" <[email protected]> wrote in message
news:[email protected]...
> Leon wrote:
>> "'lektric dan" <[email protected]> wrote in message
>> news:[email protected]...
>>> While poking around looking for something completely unrelated, I
>>> found this:
>>> http://blog.makezine.com/archive/2009/08/wooden_flashlight.html
>>> Looks no harder than a salt/pepper grinder, but a lot cooler and more
>>> useful.
>>> You could play around with the idea and make all kinds of single- and
>>> multi-cell or multi-bulbe flashlights. Or even use LEDs.
>>
>>
>> It should not be too hard "IF" you can find the hardware for it.
>
> Take apart a Maglite. Use the bits you need.
I think you will need all of it. Perhaps slip a Maglite inside a wooden
holder.
Leon wrote:
> "'lektric dan" <[email protected]> wrote in message
> news:[email protected]...
>> While poking around looking for something completely unrelated, I
>> found this:
>> http://blog.makezine.com/archive/2009/08/wooden_flashlight.html
>> Looks no harder than a salt/pepper grinder, but a lot cooler and more
>> useful.
>> You could play around with the idea and make all kinds of single- and
>> multi-cell or multi-bulbe flashlights. Or even use LEDs.
>
>
> It should not be too hard "IF" you can find the hardware for it.
Take apart a Maglite. Use the bits you need.
Leon wrote:
> "J. Clarke" <[email protected]> wrote in message
> news:[email protected]...
>> Leon wrote:
>>> "'lektric dan" <[email protected]> wrote in message
>>> news:[email protected]...
>>>> While poking around looking for something completely unrelated, I
>>>> found this:
>>>> http://blog.makezine.com/archive/2009/08/wooden_flashlight.html
>>>> Looks no harder than a salt/pepper grinder, but a lot cooler and more
>>>> useful.
>>>> You could play around with the idea and make all kinds of single- and
>>>> multi-cell or multi-bulbe flashlights. Or even use LEDs.
>>>
>>> It should not be too hard "IF" you can find the hardware for it.
>> Take apart a Maglite. Use the bits you need.
>
> I think you will need all of it. Perhaps slip a Maglite inside a wooden
> holder.
>
Like a pen kit.
--
-MIKE-
"Playing is not something I do at night, it's my function in life"
--Elvin Jones (1927-2004)
--
http://mikedrums.com
[email protected]
---remove "DOT" ^^^^ to reply
Leon wrote:
> "J. Clarke" <[email protected]> wrote in message
> news:[email protected]...
>> Leon wrote:
>>> "'lektric dan" <[email protected]> wrote in message
>>> news:[email protected]...
>>>> While poking around looking for something completely unrelated, I
>>>> found this:
>>>> http://blog.makezine.com/archive/2009/08/wooden_flashlight.html
>>>> Looks no harder than a salt/pepper grinder, but a lot cooler and
>>>> more useful.
>>>> You could play around with the idea and make all kinds of single-
>>>> and multi-cell or multi-bulbe flashlights. Or even use LEDs.
>>>
>>>
>>> It should not be too hard "IF" you can find the hardware for it.
>>
>> Take apart a Maglite. Use the bits you need.
>
> I think you will need all of it. Perhaps slip a Maglite inside a
> wooden holder.
Most of the Maglite is aluminum extrusion with some threads cut into them.
Replacing those with wooden turnings with threads shouldn't be terribly
difficult. You'll have to add some conductive material (copper foil for
example) in appropriate locations.
"'lektric dan" <[email protected]> wrote in message
news:[email protected]...
> While poking around looking for something completely unrelated, I
> found this:
> http://blog.makezine.com/archive/2009/08/wooden_flashlight.html
> Looks no harder than a salt/pepper grinder, but a lot cooler and more
> useful.
> You could play around with the idea and make all kinds of single- and
> multi-cell or multi-bulbe flashlights. Or even use LEDs.
Been done. Google.
"J. Clarke" <[email protected]> wrote in message
news:[email protected]...
>
> Most of the Maglite is aluminum extrusion with some threads cut into them.
> Replacing those with wooden turnings with threads shouldn't be terribly
> difficult.
You dont think?
You'll have to add some conductive material (copper foil for
> example) in appropriate locations.
I think it would be easier to simply slip a Maglite in side a hollow piece
of wood.
"'lektric dan" <[email protected]> wrote in message
news:[email protected]...
> While poking around looking for something completely unrelated, I
> found this:
> http://blog.makezine.com/archive/2009/08/wooden_flashlight.html
> Looks no harder than a salt/pepper grinder, but a lot cooler and more
> useful.
> You could play around with the idea and make all kinds of single- and
> multi-cell or multi-bulbe flashlights. Or even use LEDs.
It should not be too hard "IF" you can find the hardware for it.