On May 23, 2:10 pm, damian penney <[email protected]> wrote:
> On May 23, 10:36 am, Jay Chan <[email protected]> wrote:
>
>
> > On May 23, 12:41 pm, "Leon" <[email protected]> wrote:
>
> > > "Jay Chan" <[email protected]> wrote in message
>
> > >news:[email protected]...
>
> > > >I used cans of semi-gloss oil based spray paint to spray the finish
> > > > coat on a book case. The surface was very smooth before I sprayed.
> > > > But the sprayed surface was very rough after spraying. Seem like
> > > > spray paint droplets might have combined together in mid air before
> > > > landing on the surface. I used 400 grit sand paper to easily sand out
> > > > the rough surface. Now the surface is flat instead of semi gloss
> > > > after the sanding. My questions are:
>
> > > > 1. How should I prevent this problem from happening again?
>
> > > > 2. How should I put back the shine on the surface to something like
> > > > semi gloss?
>
> > > > 3. How should I put a protective coating on the "flat" surface to
> > > > allow me to clean the surface easily?
>
> > > > Thanks in advance for any info.
>
> > > > Jay Chan
>
> > > Sounds like you may have put the coat on too thin/dry.- Hide quoted text -
>
> > > - Show quoted text -
>
> > You are probably right. But the paint is coming from a can; I assume
> > the manufacturer should have formulate the paint just right.
> > Actually, I have used spray paint from cans many times before, and
> > this is the first time I have encountered this problem. Does this
> > have to do with spraying too close from the surface? Does this have
> > to do with the fact that I sprayed into the inside space of the book
> > case where the space is enclosed in five sides and the paint droplets
> > might have bounced back and collided with each other and formed big
> > droplets?
>
> > And what should I do to put the shine back onto the surface that has
> > been sanded to a "flat" finish? Any idea? Thanks.
>
> > Jay Chan
>
> Clear coating with a wipe on poly should do the trick- Hide quoted text -
>
> - Show quoted text -
This sounds promising. I have a can of wipe-on-poly left over from a
dinner table project. I will try it on an area of the book case that
no one sees, and I will find out if I like the effect.
Thanks.
Jay Chan