Hi Everyone,
I bought a used DeWalt RAS 10" 7779, but it did not come with the
manual. I downloaded some other DeWalt manuals in pdf for
their 12", but the photo's are poor. If anyone has some manuals
for any DeWalt that they can post, I would appreciate it very much.
The saw has a problem other than needing to be tuned.
The crank at the real of the arm that raises and lower the saw
is very tough to turn. Is there a fairly easy way to lubricate it?
And finally, any instructions about taking it apart?
Thanks again,
David
I'll answer my own request.
I ended up calling wolfmachinery.com, and was able to order a copy
of the manual for the DeWalt. They were very helpful with free
advice on freeing up that column lifting assembly, and so I did,
and it is now moving just fine.
BTW, since I just found this newsgroup, as I'm just getting ready to
get into woodworking, I read thru a ton of post yesterday, and
learned a lot.
Thanks to all
David G.
On Mon, 08 Sep 2003 09:08:04 -0500, David <[email protected]> wrote:
>Hi Everyone,
>
>I bought a used DeWalt RAS 10" 7779, but it did not come with the
>manual. I downloaded some other DeWalt manuals in pdf for
>their 12", but the photo's are poor. If anyone has some manuals
>for any DeWalt that they can post, I would appreciate it very much.
>
>The saw has a problem other than needing to be tuned.
>
>The crank at the real of the arm that raises and lower the saw
>is very tough to turn. Is there a fairly easy way to lubricate it?
>
>And finally, any instructions about taking it apart?
>
>Thanks again,
>David