Hello All:
Looking for tips for a source of wooden finials. The closest I've come to
what I'm looking for by Googling is a solid oak acorn finial at Rockler.
However, the one they have available (3" diameter, 1" dowel pin) is too
large. I'm looking for something closer to 2" base diameter with a 1/2"
dowel. It's for the top of a mahogany coat tree. Sources appreciated.
This this:
http://www.hooverfence.com/clearance/lota-36.htm
"vernal888" <[email protected]> wrote in message
news:[email protected]...
> Hello All:
>
> Looking for tips for a source of wooden finials. The closest I've come to
> what I'm looking for by Googling is a solid oak acorn finial at Rockler.
> However, the one they have available (3" diameter, 1" dowel pin) is too
> large. I'm looking for something closer to 2" base diameter with a 1/2"
> dowel. It's for the top of a mahogany coat tree. Sources appreciated.
>
try rec.crafts.woodturning
"vernal888" <[email protected]> wrote in message
news:[email protected]...
> Hello All:
>
> Looking for tips for a source of wooden finials. The closest I've come to
> what I'm looking for by Googling is a solid oak acorn finial at Rockler.
> However, the one they have available (3" diameter, 1" dowel pin) is too
> large. I'm looking for something closer to 2" base diameter with a 1/2"
> dowel. It's for the top of a mahogany coat tree. Sources appreciated.
>
Posted Via Usenet.com Premium Usenet Newsgroup Services
----------------------------------------------------------
** SPEED ** RETENTION ** COMPLETION ** ANONYMITY **
----------------------------------------------------------
http://www.usenet.com
These guys sell 2.5" ones. Seems that you could cut a small piece 2" in
diameter and glue it to the bottom. JG
http://store.woodturners.net/ca/catalogue/default.php?cPath=11_9
vernal888 wrote:
> Hello All:
>
> Looking for tips for a source of wooden finials. The closest I've come to
> what I'm looking for by Googling is a solid oak acorn finial at Rockler.
> However, the one they have available (3" diameter, 1" dowel pin) is too
> large. I'm looking for something closer to 2" base diameter with a 1/2"
> dowel. It's for the top of a mahogany coat tree. Sources appreciated.
vernal888 wrote:
> Hello All:
>
> Looking for tips for a source of wooden finials. The closest I've come to
> what I'm looking for by Googling is a solid oak acorn finial at Rockler.
> However, the one they have available (3" diameter, 1" dowel pin) is too
> large. I'm looking for something closer to 2" base diameter with a 1/2"
> dowel. It's for the top of a mahogany coat tree. Sources appreciated.
>
>
Try Van Dykes at:
http://www.vandykes.com/subcategory/82/
--
Jack Novak
Buffalo, NY - USA
[email protected]
(Remove -SPAM- to send email)