Norm Dresner wrote:
> I want/need to make some things for the kitchen that either of
> necessity or by design must be made from separate parts glued
> together. Since some of these will be used to prepare food, I'm
> looking for, as the subject says, non-toxic, waterproof glue that I
> can use for these things. TIA
> Norm
Water proof - REALLY water proof - resorcinol.
Water resistant, Titebond type II or III (I prefer II)
As a practical matter you don't really need water proof. Unless you plan to
run your wood glue ups through the dishwasher in which case the wood will
disintegrate too.
As far as toxicity goes, I have no idea but even if the cured glue *was*
mildly toxic it isn't going to dissolve into the food. I'd worry more about
the toxicity of the wood itself (don't use oleander, e.g.).
--
dadiOH
____________________________
dadiOH's dandies v3.06...
...a help file of info about MP3s, recording from
LP/cassette and tips & tricks on this and that.
Get it at http://mysite.verizon.net/xico
"Phisherman" <[email protected]> wrote in message
news:[email protected]...
> On Thu, 08 Jan 2009 20:56:48 GMT, "Norm Dresner" <[email protected]>
> wrote:
>
>>I want/need to make some things for the kitchen that either of necessity
>>or
>>by design must be made from separate parts glued together. Since some of
>>these will be used to prepare food, I'm looking for, as the subject says,
>>non-toxic, waterproof glue that I can use for these things.
>> TIA
>> Norm
>
>
> Not sure if any wood glues are truly "waterproof," but Elmers and
> Titebond make a reasonably good water resistant glues that are
> non-toxic. With the best glue, you still need a good snug-fitting
> clean joint. No dishwasher--hand wash only.
Gorilla glue is waterproof. I can't find info on whether it is FDA approved
for direct or indirect food contact or not.
The Gorilla woodglue is FDA approved for indirect contact. It is only
listed as water resistant.
I bet an email to the company would get a quick and definitive response.
Ed
"Norm Dresner" wrote:
>I want/need to make some things for the kitchen that either of
>necessity or
> by design must be made from separate parts glued together. Since
> some of
> these will be used to prepare food, I'm looking for, as the subject
> says,
> non-toxic, waterproof glue that I can use for these things.
After it cures out, epoxy is inert.
Lew
"MikeWhy" <[email protected]> wrote in message
news:[email protected]...
> "Norm Dresner" <[email protected]> wrote in message
> news:[email protected]...
>>I want/need to make some things for the kitchen that either of necessity
>>or
>> by design must be made from separate parts glued together. Since some of
>> these will be used to prepare food, I'm looking for, as the subject says,
>> non-toxic, waterproof glue that I can use for these things.
>
> Titebond II and III are classified as safe for "indirect food contact". I
> *believe* that means that it touches the food but is not normally
> ingested. Sorta iffy also on "waterproof". Definitions are funny that way.
TB III is NOT water proof as you and I would understand the definition. It
is water proof under the testing labs definition of water proof. Basically
they consider water resistant to mean water proof. Go figger.
"Norm Dresner" <[email protected]> wrote in message
news:[email protected]...
>I want/need to make some things for the kitchen that either of necessity or
> by design must be made from separate parts glued together. Since some of
> these will be used to prepare food, I'm looking for, as the subject says,
> non-toxic, waterproof glue that I can use for these things.
Titebond II and III are classified as safe for "indirect food contact". I
*believe* that means that it touches the food but is not normally ingested.
Sorta iffy also on "waterproof". Definitions are funny that way.
On Thu, 08 Jan 2009 20:56:48 GMT, "Norm Dresner" <[email protected]>
wrote:
>I want/need to make some things for the kitchen that either of necessity or
>by design must be made from separate parts glued together. Since some of
>these will be used to prepare food, I'm looking for, as the subject says,
>non-toxic, waterproof glue that I can use for these things.
> TIA
> Norm
Not sure if any wood glues are truly "waterproof," but Elmers and
Titebond make a reasonably good water resistant glues that are
non-toxic. With the best glue, you still need a good snug-fitting
clean joint. No dishwasher--hand wash only.
Lew Hodgett wrote:
> "Norm Dresner" wrote:
>
>> I want/need to make some things for the kitchen that either of
>> necessity or
>> by design must be made from separate parts glued together. Since
>> some of
>> these will be used to prepare food, I'm looking for, as the subject
>> says,
>> non-toxic, waterproof glue that I can use for these things.
>
>
> After it cures out, epoxy is inert.
If it's mixed precisely, otherwise it can leach phenol or amines for
ages.
--
--
--John
to email, dial "usenet" and validate
(was jclarke at eye bee em dot net)
Phisherman wrote:
> Not sure if any wood glues are truly "waterproof," but Elmers and
> Titebond make a reasonably good water resistant glues that are
> non-toxic. With the best glue, you still need a good snug-fitting
> clean joint. No dishwasher--hand wash only.
I use Elmer's Woodworkers Glue. I have cutting boards I glued up over
30 years ago and never had a failure, despite seeing them soaking in a
sink full of soapy water...
Not supposed to be water proof but I never had a joint fail. I would
not put them in a dishwasher though, and advised the wife not to soak in
the sink either.
--
Jack
Using FREE News Server: http://Motzarella.org
http://jbstein.com