Anybody own one and what do you think?
----------------------------------------------------------------------------
----
begin 666 p.gif
M1TE&.#EA/ $E`/<``#8V-B5'M%Y>7O___P``````````````````````````
M````````````````````````````````````````````````````````````
M````````````````````````````````````````````````````````````
M````````````````````````````````````````````````````````````
M````````````````````````````````````````````````````````````
M````````````````````````````````````````````````````````````
M````````````````````````````````````````````````````````````
M````````````````````````````````````````````````````````````
M````````````````````````````````````````````````````````````
M````````````````````````````````````````````````````````````
M````````````````````````````````````````````````````````````
M````````````````````````````````````````````````````````````
M````````````````````````````````````````````````````````````
M````````````````````````````````````````````````````````````
M````````````````````````````````````````````````````````````
M````````````````````````````````````````````````````````````
M````````````````````````````````````````````````````````````
M`````````````````````"'Y! $```,`+ `````\`24```C_``<('$BPH,&#
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M2*^J:JRIH$I[$+7,4FNIJ0)I:Q"WW8+[K;>[email protected](D[:GEMJON
MJN_"BZV[YD[[;+ZGDJLMO*X^NRV[_G(+\+B<AJNPPK\*'&ZU$,MKK[[74KQP
MP!&K*V^\''=L+<,..^MQQAP?+/''_9)L;:NIMGQRI^LZ/"_&"[NL<<RLRHRR
MP.P&?/+/&[-L<<?X`GWQQR-?O+'/)5ML<ZQ(1ZVROCH/G7332E<\=,OYUBPS
MT45CC?'73]]+-+8A;YVVT5=SW373"(LM-])QEVTTUPDK;;?<H4['?73&=,,-
MLM<(1^OTVDOG?37<=.\-=M:/#ZSVWY#?[??B)E,>-. DATWXYV('SCCGE(O>
M]N&>"[VYUJ"?OGK24$\,=,HY:TZ[ZZKKC3K?2[\+^LZ5XRO[R+<_;O.\5B-?
M^\.&H[LOP50[.WS%8V=[+MF7F\W\Y:D_/[SIR$<OO<&D8^HI1<K^E/[Y%:WO
M$-KPQR___/37;__]^.>O__[\]^___P`,(-K8=ZROK25S!)25`1/(P 8Z\($0
/C* $)TC!"EKP@A ," `[
`
end
"Lee Michaels" <leemichaels*nadaspam*@comcast.net> wrote in message
news:[email protected]...
>
> "Dave" <[email protected]> wrote in message
> news:_eoGf.761597$_o.418997@attbi_s71...
>>
>> "Sweet Sawdust" <[email protected]> wrote in message
>> news:[email protected]...
>>> Have 2 1023z's one 3 years old and one 2 years old. One right tilt and
>>> one
>>> left tilt. The right tilt had major switch problems, that Grizzly fixed
>>> no
>>> problem the left no problems. Only things I don't like about them is
>>> the
>>> inserts are not real good but homemade one solved the problem. They
>>> both
>>> work in small production shop.
>>> "Evon Barvinchack" <[email protected]> wrote in message
>>> news:[email protected]...
>>>> Anybody own one and what do you think?
>>
>> I have the G0444Z with the 2 extra long extension wings, the G0555
>> bandsaw (a real jewel) with 6" extension kit, and a wood lathe.
>> I have no complaints about Grizzly quality or service. Will be buying
>> from them again in the near future. If you have a chance I would drive to
>> Grizzly's show room and pickup myself. Shipping is pricy. I drove 300
>> miles to Springfield Missouri to get my stuff. It's a real experience to
>> visit one of their showrooms.
>>
>>
> One caveat about visiting one of their showrooms. You may not be able to
> fit everything into your truck! DAMHIKT.
>
> The guy loading me up said that this is a common problem.
>
Lee you are so right!
I have a SUV and my wife was crunched next to the door with the boxes
resting on the dash and myself also being squeezed in. I must say the 300
mile drive was a bit uncomfortable.
Have 2 1023z's one 3 years old and one 2 years old. One right tilt and one
left tilt. The right tilt had major switch problems, that Grizzly fixed no
problem the left no problems. Only things I don't like about them is the
inserts are not real good but homemade one solved the problem. They both
work in small production shop.
"Evon Barvinchack" <[email protected]> wrote in message
news:[email protected]...
> Anybody own one and what do you think?
>
>
> --------------------------------------------------------------------------
--
> ----
>
>
>
>
"Dave" <[email protected]> wrote in message
news:6krGf.541911$084.183180@attbi_s22...
>
> "Lee Michaels" <leemichaels*nadaspam*@comcast.net> wrote in message
> news:[email protected]...
>>
>> "Dave" <[email protected]> wrote in message
>> news:_eoGf.761597$_o.418997@attbi_s71...
>>>
>>> "Sweet Sawdust" <[email protected]> wrote in message
>>> news:[email protected]...
>>>> Have 2 1023z's one 3 years old and one 2 years old. One right tilt and
>>>> one
>>>> left tilt. The right tilt had major switch problems, that Grizzly fixed
>>>> no
>>>> problem the left no problems. Only things I don't like about them is
>>>> the
>>>> inserts are not real good but homemade one solved the problem. They
>>>> both
>>>> work in small production shop.
>>>> "Evon Barvinchack" <[email protected]> wrote in message
>>>> news:[email protected]...
>>>>> Anybody own one and what do you think?
>>>
>>> I have the G0444Z with the 2 extra long extension wings, the G0555
>>> bandsaw (a real jewel) with 6" extension kit, and a wood lathe.
>>> I have no complaints about Grizzly quality or service. Will be buying
>>> from them again in the near future. If you have a chance I would drive
>>> to Grizzly's show room and pickup myself. Shipping is pricy. I drove 300
>>> miles to Springfield Missouri to get my stuff. It's a real experience
>>> to visit one of their showrooms.
>>>
>>>
>> One caveat about visiting one of their showrooms. You may not be able to
>> fit everything into your truck! DAMHIKT.
>>
>> The guy loading me up said that this is a common problem.
>>
> Lee you are so right!
> I have a SUV and my wife was crunched next to the door with the boxes
> resting on the dash and myself also being squeezed in. I must say the 300
> mile drive was a bit uncomfortable.
>
>
I had a pickup load the was far heavier than the suspension was designed
for. I could literally lift up the front end of the truck. If I hit a bump,
the front end lifted off the ground. I took it slow and easy around
corners.
"Dave" <[email protected]> wrote in message
news:_eoGf.761597$_o.418997@attbi_s71...
>
> "Sweet Sawdust" <[email protected]> wrote in message
> news:[email protected]...
>> Have 2 1023z's one 3 years old and one 2 years old. One right tilt and
>> one
>> left tilt. The right tilt had major switch problems, that Grizzly fixed
>> no
>> problem the left no problems. Only things I don't like about them is the
>> inserts are not real good but homemade one solved the problem. They
>> both
>> work in small production shop.
>> "Evon Barvinchack" <[email protected]> wrote in message
>> news:[email protected]...
>>> Anybody own one and what do you think?
>
> I have the G0444Z with the 2 extra long extension wings, the G0555 bandsaw
> (a real jewel) with 6" extension kit, and a wood lathe.
> I have no complaints about Grizzly quality or service. Will be buying from
> them again in the near future. If you have a chance I would drive to
> Grizzly's show room and pickup myself. Shipping is pricy. I drove 300
> miles to Springfield Missouri to get my stuff. It's a real experience to
> visit one of their showrooms.
>
>
One caveat about visiting one of their showrooms. You may not be able to
fit everything into your truck! DAMHIKT.
The guy loading me up said that this is a common problem.
"Sweet Sawdust" <[email protected]> wrote in message
news:[email protected]...
> Have 2 1023z's one 3 years old and one 2 years old. One right tilt and
> one
> left tilt. The right tilt had major switch problems, that Grizzly fixed no
> problem the left no problems. Only things I don't like about them is the
> inserts are not real good but homemade one solved the problem. They both
> work in small production shop.
> "Evon Barvinchack" <[email protected]> wrote in message
> news:[email protected]...
>> Anybody own one and what do you think?
I have the G0444Z with the 2 extra long extension wings, the G0555 bandsaw
(a real jewel) with 6" extension kit, and a wood lathe.
I have no complaints about Grizzly quality or service. Will be buying from
them again in the near future. If you have a chance I would drive to
Grizzly's show room and pickup myself. Shipping is pricy. I drove 300 miles
to Springfield Missouri to get my stuff. It's a real experience to visit
one of their showrooms.
On Wed, 08 Feb 2006 13:48:45 GMT, "Evon Barvinchack"
<[email protected]> wrote:
>Anybody own one and what do you think?
>
I have a G1023Z. If I had to buy another table saw tomorrow I would
get another Grizzly. Buying was simple--I ordered it over the Intenet
and chose to have it delivered to an OverNite truck center near my
home. Five days later I got a call from the truck center that it was
there for pickup.
Assembly was simple. I have been using it 3 or 4 days a week for
about a year now with no problems whatsoever. Like another user said,
I made my own zero-clearance throat plate. That in combo with Forrest
WWII blades and I get cuts that usually can be glued without further
work. (I own other blades, but I keep coming back to WWII.)
Get one!
User
In article <[email protected]>,
"Evon Barvinchack" <[email protected]> wrote:
> Anybody own one and what do you think?
>
Mine is no longer made, since I bought it 20 years ago. But it's the
only non-Delta stationary tool I haven't replaced.
>
>
> begin 666 p.gif
You do know you are posting the above, right?
--
--------------------------------------------------------
Personal e-mail is the n7bsn but at amsat.org
This posting address is a spam-trap and seldom read
RV and Camping FAQ can be found at
http://www.ralphandellen.us/rv
> If you have a chance I would drive to Grizzly's show room and pickup
> myself. Shipping is pricy. I drove >300 miles to Springfield Missouri to
> get my stuff. It's a real experience to visit one of their showrooms.
>
I'll say! It is the ultimate candy store. Beyond the looking, they had
good folks on the floor when we were there. The fellow that 'adoped' us was
a retired oil company executive who was also a pretty avid woodworker. He
worked part-time in their training/demo room and built displays on the side.
He demonstrated a 1023S that had been in the backshop for a couple of years
before he even showed us the new equipment. Really nice to talk with
competent, experienced sales people who know the craft. You don't even get
that lucky in a tool store or Woodcraft these days.
RonB