x-no-archive:yes
I am building for my mom a self standing knive drawer with butcher
clock cutting board on top. The plans in my book call for the false
drawer front to be about 10 inches long and 2 and 1/4 inches wide. It
does not call for it but could I cut the drawer front similar to the
way you cut for a raised panel so it matches the drawers in my kitchen
or is this wood not wide enough? (You know the "bevel" look on the
drawer face for lack of a better term. Can you give me advice on how to
set up a table saw for this? My book shows how but only for raised
panel cuttign a larger piece of wood such as a door.
x-no-archive:yes
Is it better to use a table saw or router table with a bevel bit? Any
idea on what angle to put the saw?
dadiOH wrote:
> stryped wrote:
> > x-no-archive:yes
>
> Is now.
>
>
> > I am building for my mom a self standing knive drawer with butcher
> > clock cutting board on top. The plans in my book call for the false
> > drawer front to be about 10 inches long and 2 and 1/4 inches wide. It
> > does not call for it but could I cut the drawer front similar to the
> > way you cut for a raised panel so it matches the drawers in my kitchen
> > or is this wood not wide enough? (You know the "bevel" look on the
> > drawer face for lack of a better term. Can you give me advice on how
> > to set up a table saw for this? My book shows how but only for raised
> > panel cuttign a larger piece of wood such as a door.
>
> 1. Tilt saw blade
>
> 2. Bevel ends
>
> 3. Bevel sides
>
> NOTE - "Bevel" means that you are not cutting through the full thickness
> of the wood.
>
> --
>
> dadiOH
> ____________________________
>
> dadiOH's dandies v3.06...
> ...a help file of info about MP3s, recording from
> LP/cassette and tips & tricks on this and that.
> Get it at http://mysite.verizon.net/xico
stryped wrote:
> x-no-archive:yes
Is now.
> I am building for my mom a self standing knive drawer with butcher
> clock cutting board on top. The plans in my book call for the false
> drawer front to be about 10 inches long and 2 and 1/4 inches wide. It
> does not call for it but could I cut the drawer front similar to the
> way you cut for a raised panel so it matches the drawers in my kitchen
> or is this wood not wide enough? (You know the "bevel" look on the
> drawer face for lack of a better term. Can you give me advice on how
> to set up a table saw for this? My book shows how but only for raised
> panel cuttign a larger piece of wood such as a door.
1. Tilt saw blade
2. Bevel ends
3. Bevel sides
NOTE - "Bevel" means that you are not cutting through the full thickness
of the wood.
--
dadiOH
____________________________
dadiOH's dandies v3.06...
...a help file of info about MP3s, recording from
LP/cassette and tips & tricks on this and that.
Get it at http://mysite.verizon.net/xico
stryped wrote:
> Is it better to use a table saw or router table with a bevel bit? Any
> idea on what angle to put the saw?
At some point in your life - both woodworking and regular - you are
going to have to make a decision all on your own. It makes little
difference whether you use a saw or router (about which you did not ask)
except that most router bits that bevel are 45 degrees. If that's what
you want, fine; if not you can either buy a router bit with a different
bevel (limited choice) or use your saw.
As far as what angle for the saw blade, that is entirely optional. WTF
angle do you want? Make a decision...
--
dadiOH
____________________________
dadiOH's dandies v3.06...
...a help file of info about MP3s, recording from
LP/cassette and tips & tricks on this and that.
Get it at http://mysite.verizon.net/xico
On 4/13/2006 8:35 AM stryped mumbled something about the following:
> x-no-archive:yes
It's archived now.
>
> I am building for my mom a self standing knive drawer with butcher
> clock cutting board on top. The plans in my book call for the false
> drawer front to be about 10 inches long and 2 and 1/4 inches wide. It
> does not call for it but could I cut the drawer front similar to the
> way you cut for a raised panel so it matches the drawers in my kitchen
> or is this wood not wide enough? (You know the "bevel" look on the
> drawer face for lack of a better term. Can you give me advice on how to
> set up a table saw for this? My book shows how but only for raised
> panel cuttign a larger piece of wood such as a door.
>
Why don't you start doing a little research on your own? I expect my 5
yr old grandson to ask how to do everything, but by the time he's 10, he
better be doing some research on his own, not asking for every step like
you do.
--
Odinn
RCOS #7 SENS BS ???
"The more I study religions the more I am convinced that man never
worshiped anything but himself." -- Sir Richard Francis Burton
Reeky's unofficial homepage ... http://www.reeky.org
'03 FLHTI ........... http://www.sloanclan.org/gallery/ElectraGlide
'97 VN1500D ......... http://www.sloanclan.org/gallery/VulcanClassic
Atlanta Biker Net ... http://www.atlantabiker.net
Vulcan Riders Assoc . http://www.vulcanriders.org
rot13 [email protected] to reply
"stryped" <[email protected]> wrote in message
news:[email protected]...
> x-no-archive:yes
>
> I am building for my mom a self standing knive drawer with butcher
> clock cutting board on top. The plans in my book call for the false
> drawer front to be about 10 inches long and 2 and 1/4 inches wide. It
> does not call for it but could I cut the drawer front similar to the
> way you cut for a raised panel so it matches the drawers in my kitchen
> or is this wood not wide enough? (You know the "bevel" look on the
> drawer face for lack of a better term. Can you give me advice on how to
> set up a table saw for this? My book shows how but only for raised
> panel cuttign a larger piece of wood such as a door.
>
I think you have asked a similar question. Check your other posts and
review the answers.
On 4/13/2006 11:02 AM stryped mumbled something about the following:
> x-no-archive:yes
>
> Is it better to use a table saw or router table with a bevel bit? Any
> idea on what angle to put the saw?
> dadiOH wrote:
>> stryped wrote:
>>> x-no-archive:yes
>> Is now.
>>
>>
>>> I am building for my mom a self standing knive drawer with butcher
>>> clock cutting board on top. The plans in my book call for the false
>>> drawer front to be about 10 inches long and 2 and 1/4 inches wide. It
>>> does not call for it but could I cut the drawer front similar to the
>>> way you cut for a raised panel so it matches the drawers in my kitchen
>>> or is this wood not wide enough? (You know the "bevel" look on the
>>> drawer face for lack of a better term. Can you give me advice on how
>>> to set up a table saw for this? My book shows how but only for raised
>>> panel cuttign a larger piece of wood such as a door.
>> 1. Tilt saw blade
>>
>> 2. Bevel ends
>>
>> 3. Bevel sides
>>
>> NOTE - "Bevel" means that you are not cutting through the full thickness
>> of the wood.
>>
This is archived as well. You also need to learn how to trim sigs.
--
Odinn
RCOS #7 SENS BS ???
"The more I study religions the more I am convinced that man never
worshiped anything but himself." -- Sir Richard Francis Burton
Reeky's unofficial homepage ... http://www.reeky.org
'03 FLHTI ........... http://www.sloanclan.org/gallery/ElectraGlide
'97 VN1500D ......... http://www.sloanclan.org/gallery/VulcanClassic
Atlanta Biker Net ... http://www.atlantabiker.net
Vulcan Riders Assoc . http://www.vulcanriders.org
rot13 [email protected] to reply
On 4/13/2006 11:04 AM stryped mumbled something about the following:
> x-no-archive:yes
>
> What is a ZCI ?
>
It's archived now.
--
Odinn
RCOS #7 SENS BS ???
"The more I study religions the more I am convinced that man never
worshiped anything but himself." -- Sir Richard Francis Burton
Reeky's unofficial homepage ... http://www.reeky.org
'03 FLHTI ........... http://www.sloanclan.org/gallery/ElectraGlide
'97 VN1500D ......... http://www.sloanclan.org/gallery/VulcanClassic
Atlanta Biker Net ... http://www.atlantabiker.net
Vulcan Riders Assoc . http://www.vulcanriders.org
rot13 [email protected] to reply