These extractors might work unless they take a hex alan wrench, of which
there is the type that works with a ratchet handle, which Sears also has
(hex alan sockets):
http://www.sears.com/sr/javasr/search.do?BV_UseBVCookie=Yes&verticalFullName=Tools&keyword=alan+hex+socket&displayTarget=searchresults
Extracters:
http://www.sears.com/sr/javasr/product.do?BV_UseBVCookie=Yes&vertical=TOOL&pid=00952157000
http://www.sears.com/sr/javasr/product.do?vertical=TOOL&pid=00952152000&bidsite=&BV_UseBVCookie=Yes
http://www.sears.com/sr/javasr/product.do?BV_UseBVCookie=Yes&vertical=TOOL&pid=00953153000
(Sorry if my only suggestion is to "buy" something...)
--
Alex - newbie_neander in woodworking
cravdraa_at-yahoo_dot-com
not my site: http://www.e-sword.net/
Take a dremel with a cutoff wheel and grind a small slot in the top of
the insert. Put masking tape around the insert to protect wood while
grinding. Find largest screw driver that fits slot and remove. This
will definetly work with screw in and the press in ones might even be
loosened by this method. Use caution with bolt methods described above
on brass. Once the threads are chewed up, you will have an even harder
time of removing, not to mention the bolt that is now stuck in your
insert.
On Wed, 01 Jun 2005 13:24:35 GMT, "Leon" <[email protected]> wrote:
>Ditto that but use perhaps a grade 5 bolt or better. You certainly would
>not want to twist the bolt head off.
he is using 10-24 so it is possible. hell I have broken enough grade 8 1/4-20
bolts when I used them to drive in threaded inserts.
--
Knight-Toolworks & Custom Planes
Custom made wooden planes at reasonable prices
See http://www.knight-toolworks.com For prices and ordering instructions.
Many of the threaded inserts have a screwdriver slot in the top of the
insert take a look and if it does just use a screwdriver to back them out.
Larry
<[email protected]> wrote in message
news:[email protected]...
> Have some threaded 10-24 brass inserts that have to come out.
> Besides drilling them out...
>
> Any tricks?
> Tools?
>
> Thought this would be the place to ask.
>
> Thanks.
>
On Wed, 1 Jun 2005 18:46:22 -0400, "larry in cinci" <[email protected]> wrote:
>Many of the threaded inserts have a screwdriver slot in the top of the
>insert take a look and if it does just use a screwdriver to back them out.
those slots are about useless they are usually way to weak to work. only if you
use steel insert you may get away with it. most out there are brass and they
will not hold up.
I have driven I don't know how many thousands of inserts in. they are far
easier to put in the get out (G)
--
Knight-Toolworks & Custom Planes
Custom made wooden planes at reasonable prices
See http://www.knight-toolworks.com For prices and ordering instructions.
In article <[email protected]>, [email protected] wrote:
>Have some threaded 10-24 brass inserts that have to come out.
>Besides drilling them out...
If they're press-fit, you'll have to drill them out.
If they were screwed in, it seems you should be able to remove them with the
same tool you used to install them.
--
Regards,
Doug Miller (alphageek at milmac dot com)
Nobody ever left footprints in the sands of time by sitting on his butt.
And who wants to leave buttprints in the sands of time?
On 31 May 2005 18:18:29 -0700, [email protected] wrote:
>Have some threaded 10-24 brass inserts that have to come out.
>Besides drilling them out...
>
>Any tricks?
>Tools?
>
they are far more fun to remove then put in (G) use some super glue on a bolt to
long it in place and see if you can unscrew them that way. super glue is pretty
easy to remove when your done.
--
Knight-Toolworks & Custom Planes
Custom made wooden planes at reasonable prices
See http://www.knight-toolworks.com For prices and ordering instructions.
>If they're press-fit, you'll have to drill them out.
press fit is easy as long as the material behind them is strong. just use a
screw and drive it in and keep going it will lift out the insert as long as it
does not punch through the material.
--
Knight-Toolworks & Custom Planes
Custom made wooden planes at reasonable prices
See http://www.knight-toolworks.com For prices and ordering instructions.
Ditto that but use perhaps a grade 5 bolt or better. You certainly would
not want to twist the bolt head off.
"John Girouard" <[email protected]> wrote in message
news:[email protected]...
> Maybe try putting some epoxy on a bolt, and putting the bolt in the
> threaded insert. When the epoxy dries, back the bolt (and hopefully the
> threaded insert) out with a wrench. Good luck.
>
[email protected] wrote:
> Have some threaded 10-24 brass inserts that have to come out.
> Besides drilling them out...
>
> Any tricks?
> Tools?
If they are threaded inserts, put the smallest nut possible on a bolt
the correct size, thread in the bolt and wedge it in by tightening the
nut against the end of the insert, turn the bolt out.
--
dadiOH
____________________________
dadiOH's dandies v3.06...
...a help file of info about MP3s, recording from
LP/cassette and tips & tricks on this and that.
Get it at http://mysite.verizon.net/xico