"Rob H." <[email protected]> wrote in message
news:[email protected]...
> Since next Thursday is Thanksgiving holiday, I'm planning to post on
> Wednesday instead, here is this week's set:
>
> http://55tools.blogspot.com/
>
>
> Rob
1780 : I think this held a lighted cigarette. With the lid closed, smoke
came out of the mouth. could be wrong, but I saw one used like that when I
was a kid in the 1940s.
Steve R.
1777. Probably used over a heat source for cooking. The supporting
arm was adjustable to allow proper balancing for support of whatever
was being rotisserie'd.
1778. A bearing with replaceable parts.
1779. A really cool cigar cutter for a smoking club.
1780. There was one in the house, as decoration, when I was a kid. No
idea as to it's utility.
1781. Something to do with stopping/opening up a pipe.
R
On Nov 19, 4:18=A0am, "Rob H." <[email protected]> wrote:
> Since next Thursday is Thanksgiving holiday, I'm planning to post on
> Wednesday instead, here is this week's set:
>
> http://55tools.blogspot.com/
>
> Rob
When I was a kid the cast iron alligator had kitchen matches in it.
As usual, I feel woefully ignorant each Thursday morning - thank
you very much Rob.
1777. Looks like it would sure help with a fireplace model of a
pop corn popper.
1782. I don't think it is for copper pipe, but I do wonder if it
was used for glass tube or steel brake line.
--
______________________________
Keep the whole world singing . . . .
DanG (remove the sevens)
[email protected]
"Rob H." <[email protected]> wrote in message
news:[email protected]...
> Since next Thursday is Thanksgiving holiday, I'm planning to
> post on Wednesday instead, here is this week's set:
>
> http://55tools.blogspot.com/
>
>
> Rob
"Rob H." <[email protected]> wrote in
news:[email protected]:
> Since next Thursday is Thanksgiving holiday, I'm planning
> to post on Wednesday instead, here is this week's set:
>
> http://55tools.blogspot.com/
>
>
> Rob
>
1778 looks like some kind of bushing driver that would be used
in a press. Perhaps used for piston pins.
1780 Incense burner
1782 Unusual looking pipe cutter w/burr remover
On Nov 19, 4:18=A0am, "Rob H." <[email protected]> wrote:
> Since next Thursday is Thanksgiving holiday, I'm planning to post on
> Wednesday instead, here is this week's set:
>
> http://55tools.blogspot.com/
1777: Used to support a cooking pot over an open fire
or fireplace.
1778: Looks like a big bench dog.
1779: A trap. Something small can get in, but not out.
1780: Ashtray of some sort. I recall that my parents
once had one like this.
1781: An old plumber's snake.
1782: Tubing cutter
John
In article <[email protected]>, "Rob H." <[email protected]>
wrote:
> Since next Thursday is Thanksgiving holiday, I'm planning to post on
> Wednesday instead, here is this week's set:
>
> http://55tools.blogspot.com/
Let's see now...
1777 - I know I've seen this from somewhere...but beyond that, my memory
fails for now. Possibly this is a glassblowing apparatus, with the
forked stand to support the blowpipe (or whatever it's called)?
1778 - No real idea; the best thing that comes to mind is a (counter)
weight for some piece of machinery, presumably adjustable by attaching
it to different locations on a lever arm. Possibly, this was used on a
steam locomotive safety blow-off valve?
1779 - Shear for cutting off cordage?
1780 - An alligator bin for...pens, perhaps?
1781 - Cleaner for piping, maybe for gutter downspouts or similar?
1782 - Looks to be a tubing cutter, not unlike what is commonly used in
plumbing. The triangular attachment at the tip is presumably to remove
the burr created by the cutting wheel while cutting the tubing. Most
I've seen have a couple of small (non-sharpened) rollers instead of the
V grooved projection, which I presume would make most I've seen a bit
smoother operating than this one.
Now to see other suggestions...
--
Andrew Erickson
"He is no fool who gives what he cannot keep to gain that which he cannot
lose." -- Jim Elliot
"Rob H." <[email protected]> wrote in message
news:[email protected]...
> Since next Thursday is Thanksgiving holiday, I'm planning to post on
> Wednesday instead, here is this week's set:
>
> http://55tools.blogspot.com/
>
>
> Rob
1782 looks like an adjustable tubing cutter with the pointy end for reaming
the ID.
"Steve R." <[email protected]> wrote in message
news:[email protected]...
>
> "Rob H." <[email protected]> wrote in message
> news:[email protected]...
>> Since next Thursday is Thanksgiving holiday, I'm planning to post on
>> Wednesday instead, here is this week's set:
>>
>> http://55tools.blogspot.com/
>>
>>
>> Rob
>
> 1780 : I think this held a lighted cigarette. With the lid closed, smoke
> came out of the mouth. could be wrong, but I saw one used like that when
> I was a kid in the 1940s.
>
>
> Steve R.
>
Cigar with the lit end in the body?
1780 For all the people saying match-holder, probably right. For all the
people saying alligator, I'd argue: Salamander.
http://en.wikipedia.org/wiki/Salamander_%28legendary_creature%29
There are a variety of (largely fireproof) things that go by the title
"salamander". I know, just a quibble.
1781 At first I thought it might be something like a plumber's snake, or
some type of pipe cleaner/reamer, but... All the joints seem to be aligned
so that it only is flexible in one dimension. This confused me. What is
the use for a snake that is constrained to be planar?
"Rob H." <[email protected]> wrote in message
news:[email protected]...
> Since next Thursday is Thanksgiving holiday, I'm planning to post on
> Wednesday instead, here is this week's set:
>
> http://55tools.blogspot.com/
>
>
> Rob
Rob H. wrote:
> Since next Thursday is Thanksgiving holiday, I'm planning to post on
> Wednesday instead, here is this week's set:
>
> http://55tools.blogspot.com/
>
>
> Rob
1777 - Well it looks a lot like the lead pot holder I use a
reenactments. Not sure if that was it's original use but it works good.
Pot goes on the rack and a long handled ladle goes on the stand.
1778 - Journal box bearing?
1779 - Push action trimmer?
1780 - Incense burner?
1781 - Burner tube scraper?
1782 - Home built tubing cutter. At least I don't ever remember seeing
one that style on sale.
--
Steve W.
Rob H. wrote:
> Since next Thursday is Thanksgiving holiday, I'm planning to post on
> Wednesday instead, here is this week's set:
>
> http://55tools.blogspot.com/
1777 I'm gonna guess branding iron holder
1778 Some kind of linear bearing, maybe for a roundhouse turntable
1781 Cannon or field piece swab rod
On 2009-11-19, Rob H. <[email protected]> wrote:
> Since next Thursday is Thanksgiving holiday, I'm planning to post on
> Wednesday instead, here is this week's set:
>
> http://55tools.blogspot.com/
Posting from Rec.crafts.metalworking as always.
1777) It looks to me like a stand for heating a branding iron
either over a fire under the grate there, or in a pot
of coals supported on the frame where the circle is.
1778) At a guess, it is designed for aligning holes in two
pieces of metal, with the bronze part being for driving
it in.
Note the nice rounded bevel on the small end to make it easier
to start.
It could also be a high-current contact point, if the "brass or
bronze" were actually pure copper.
1779) If the flap in the center is steel, I think that it is designed
for cutting something placed in whichever hole is a good fit.
If it were leather instead, I would think that it was a part of
a foot operated air pump, but that would not explain the
beveling of the holes to produce a sharp edge, and the fact that
each hole is a reasonable percentage larger (or smaller
depending on your direction) than the previous one.
Exactly *what* it is to cut is not clear, but I suspect that it
is operated by stepping on the top. Or, given the size, perhaps
by squeezing it in a vise.
1780) I suspect that this is an incense burner. It would be burned
in the lower jaw, and extra incense would be stored in the body,
perhaps along with matches to light the next stick.
1781) This looks to me like a folding flue cleaner -- perhaps for
the flues in a locomotive boiler or the like. it is unfolded,
and threaded through the flue small end first, and then pulled
so the large end scrapes of carbon deposits and the like as it
is drawn through.
1782) A tubing or pipe cutter. The tubing is placed in the 'V', and
the hex handle adjusted to tighten the sharp cutter wheel
against the side, after which it is rotated around the tube
once, the handle tightened, and rotated again until the tubing
parts.
The "arrowhead" is then used to debur the inside edges of the
two halves.
Usually, the tubing is supported by a pair of rollers instead of
the 'V' of brass or bronze.
And the fact that the handle is hex suggests that it can be
tightened by a wrench, so it can be used on tougher materials
than the smaller ones can -- perhaps steel pipe up to 1-1/2"
diameter or so.
Now to see what others have suggested.
Enjoy,
DoN.
--
Email: <[email protected]> | Voice (all times): (703) 938-4564
(too) near Washington D.C. | http://www.d-and-d.com/dnichols/DoN.html
--- Black Holes are where God is dividing by zero ---
"Rob H." <[email protected]> wrote in message
news:[email protected]...
> Since next Thursday is Thanksgiving holiday, I'm planning to post on
> Wednesday instead, here is this week's set:
>
> http://55tools.blogspot.com/
>
>
> Rob
1777. Early prototype Ouiji Board pointer.
1778. Adjustable HD bench dog.
1779. Incense Burner
1780. Alligator
1781. Long universal joint.
1782. Tubing cutter with reamer.
On Thu, 19 Nov 2009 11:48:37 -0500, Alexander Thesoso wrote:
> 1780 For all the people saying match-holder, probably right. For all the
> people saying alligator, I'd argue: Salamander.
> http://en.wikipedia.org/wiki/Salamander_%28legendary_creature%29
> There are a variety of (largely fireproof) things that go by the title
> "salamander". I know, just a quibble.
>
> 1781 At first I thought it might be something like a plumber's snake, or
> some type of pipe cleaner/reamer, but... All the joints seem to be aligned
> so that it only is flexible in one dimension. This confused me. What is
> the use for a snake that is constrained to be planar?
I'm thinking more a children's toy with a cloth tube over the body and a
head of some sort stuck on the flat end, kids wouldn't worry that it only
"wriggled" 1 way.
> "Rob H." <[email protected]> wrote in message
> news:[email protected]...
>> Since next Thursday is Thanksgiving holiday, I'm planning to post on
>> Wednesday instead, here is this week's set:
>>
>> http://55tools.blogspot.com/
>>
>>
>> Rob
Robin