On Sep 11, 10:46 pm, "GarageWoodworks" <.@.> wrote:
> <[email protected]> wrote in message
>
> news:[email protected]...
>
> > OK, I give up. I've been trying to buy a tenoning for my Delta table
> > saw but there are so many that I need some advice. Even Delta has two
> > models and I cannot tell the difference from the descriptions that
> > I've found.
>
> > Help!!
>
> Make your own and save yoru money for a more useful tool.
>
> http://www.garagewoodworks.com/jigsfixtures.htm
>
> --www.garagewoodworks.com
OK, Make one's own TG. But, what measurements did you use for your
jig? Is it set for 3/4" stock? For a fixed tenonn size, shoulder size?
Not taking a shot, seriously interested.
In an magazine product comparison (FWW I think) the General Tools
tennoning jig was the winner because of the best adjustability and
usability.
http://www.houseoftools.com/product.htm?pid=211199
On Sep 11, 6:44 pm, [email protected] wrote:
> OK, I give up. I've been trying to buy a tenoning for my Delta table
> saw but there are so many that I need some advice. Even Delta has two
> models and I cannot tell the difference from the descriptions that
> I've found.
>
> Help!!
[email protected] wrote:
>OK, I give up. I've been trying to buy a tenoning for my Delta
table
>saw but there are so many that I need some advice. Even Delta has
two
>models and I cannot tell the difference from the descriptions that
>I've found.
SFWIW, Sears & Rubbish as a "Universal Jig" that does tenoning quite
well if it is not going to be a day in, day out, production job,
Lew
<[email protected]> wrote in message
news:[email protected]...
> OK, I give up. I've been trying to buy a tenoning for my Delta table
> saw but there are so many that I need some advice. Even Delta has two
> models and I cannot tell the difference from the descriptions that
> I've found.
>
> Help!!
Make your own and save yoru money for a more useful tool.
http://www.garagewoodworks.com/jigsfixtures.htm
--
www.garagewoodworks.com
"Hoosierpopi" <[email protected]> wrote in message
news:[email protected]...
> On Sep 11, 10:46 pm, "GarageWoodworks" <.@.> wrote:
>> <[email protected]> wrote in message
>>
>> news:[email protected]...
>>
>> > OK, I give up. I've been trying to buy a tenoning for my Delta table
>> > saw but there are so many that I need some advice. Even Delta has two
>> > models and I cannot tell the difference from the descriptions that
>> > I've found.
>>
>> > Help!!
>>
>> Make your own and save yoru money for a more useful tool.
>>
>> http://www.garagewoodworks.com/jigsfixtures.htm
>>
>> --www.garagewoodworks.com
>
> OK, Make one's own TG. But, what measurements did you use for your
> jig? Is it set for 3/4" stock? For a fixed tenonn size, shoulder size?
> Not taking a shot, seriously interested.
>
The jig rides against the TS fence. The tenon size is adjusted by moving
the TS fence.
--
www.garagewoodworks.com
>> > OK, I give up. I've been trying to buy a tenoning for my Delta table
>> > saw but there are so many that I need some advice. Even Delta has two
>> > models and I cannot tell the difference from the descriptions that
>> > I've found.
>>
>> > Help!!
>>
>> Make your own and save yoru money for a more useful tool.
>>
>> http://www.garagewoodworks.com/jigsfixtures.htm
>>
>> --www.garagewoodworks.com
>
> OK, Make one's own TG. But, what measurements did you use for your
> jig? Is it set for 3/4" stock? For a fixed tenonn size, shoulder size?
> Not taking a shot, seriously interested.
Not seeing the "adjustment"? That's because, unlike most commercial jigs,
this one rides against the fence, not the miter bar slot, and that's how you
set your cheek cuts.
Mike
[email protected] wrote:
> OK, I give up. I've been trying to buy a tenoning for my Delta table
> saw but there are so many that I need some advice. Even Delta has two
> models and I cannot tell the difference from the descriptions that
> I've found.
Heavier is better -- unfortunately the old really heavy model is NLA.
One thing is whether you have the left or right tilt -- most won't
handle but one side.
I ended up going w/ the Powermatic version a couple of years ago on the
basis of essentially same price and weighed slightly more than the
competing at the time.
Judgment is it is satisfactory, could be heavier for better stability
but that's the problem w/ all being made today afaik.
--
On Tue, 11 Sep 2007 21:44:12 -0400, [email protected] wrote:
>OK, I give up. I've been trying to buy a tenoning for my Delta table
>saw but there are so many that I need some advice. Even Delta has two
>models and I cannot tell the difference from the descriptions that
>I've found.
>
>Help!!
I have the "General" and it seems to work pretty good. If you buy one
instead of building your own, I suggest you take a close look at the
surface that slides on your table saw top and file, grind, polish,
etc. off any burrs. I didn't and the damned scratch it left on my
saw's top really pissed me off. No real complaints other than that.
Tom Veatch
Wichita, KS
USA