the best way is cyanocrilate with accélerator.estimed time to cure is 5
sec.Hot Stuff is the best in the kind
ébénismini
"Mike G" <[email protected]> a écrit dans le message de
news:[email protected]...
> Generally when I do that type of thing I go with a 5 minute two part
epoxy.
>
> It glues anything, is far stronger then most other glues, and, requires,
> naturally, a very short glue up time. If worse comes to worse you can hold
> it for 5 minutes.
>
> --
> Mike G.
> Heirloom Woods
> www.heirloom-woods.net
> "Del" <[email protected]> wrote in message
> news:[email protected]...
> > I've milled a handle for a jewelry box I'm making and I have some
> > concerns about how to affix it to the box. The surface area onto which
> > glue will be placed is about 3/16" x 5". Will yellow glue alone be
> > sufficient or should I try to use a biscuit? I don't want any
> > fasteners to be visible.
> >
> > TIA
>
>
Generally when I do that type of thing I go with a 5 minute two part epoxy.
It glues anything, is far stronger then most other glues, and, requires,
naturally, a very short glue up time. If worse comes to worse you can hold
it for 5 minutes.
--
Mike G.
Heirloom Woods
www.heirloom-woods.net
"Del" <[email protected]> wrote in message
news:[email protected]...
> I've milled a handle for a jewelry box I'm making and I have some
> concerns about how to affix it to the box. The surface area onto which
> glue will be placed is about 3/16" x 5". Will yellow glue alone be
> sufficient or should I try to use a biscuit? I don't want any
> fasteners to be visible.
>
> TIA