Josh,
A couple of weeks ago I saw one of your comments about card scrapers. I have
had the same problem with thumbs tiring and getting hot. I build a holder for
mine as I am too cheap I (call it thrifty) to spend $20-30 for one. I probably
used it to buy a #80 instead..
Anyway, I finally found out how to scan the plan and have posted it on ABPW.
Mine was made from scrap oak and cost me 30 cents for the hardware. Actual shop
time was a bit over 30 minutes. Ease the edges. HTH.
Regards,
Roy
I reloaded the file, this time with one that is about 4 megs smaller. Take
another look in a couple of minutes. I did not pay attention to the file size
the first time.
Roy
On Sun, 21 Nov 2010 14:12:30 -0800, "CW" <[email protected]> wrote:
>
>"Roy" <[email protected]> wrote in message
>news:[email protected]...
>>
>>
>> Anyway, I finally found out how to scan the plan and have posted it on
>> ABPW.
>> Mine was made from scrap oak and cost me 30 cents for the hardware.
>> Actual shop
>> time was a bit over 30 minutes. Ease the edges. HTH.
>>
>Post is there. No attachment.
>
"Roy" <[email protected]> wrote in message
news:[email protected]...
>
>
> Anyway, I finally found out how to scan the plan and have posted it on
> ABPW.
> Mine was made from scrap oak and cost me 30 cents for the hardware.
> Actual shop
> time was a bit over 30 minutes. Ease the edges. HTH.
>
Post is there. No attachment.