On Sun, 10 Jul 2011 10:38:07 -0500, Swingman <[email protected]> wrote:
>On 7/10/2011 8:24 AM, Larry Jaques wrote:
>> On Sun, 10 Jul 2011 05:47:31 -0500, Swingman<[email protected]> wrote:
>
>>> Or a, fully working, model of Ashley Judd, maybe?
>>
>> Ooh! Ooh! Ooh! She's one of my favorite women of all time. I fell in
>> lust with her after seeing her first flick, _Ruby in Paradise_.
>
>"Come Early Morning" ... carrying that jukebox in the back of her pickup
>until she finally gets it in the double wide in the last scene, drops in
>a coin and Billy Joe Shaver starts cranking out "I'm Just An Old Chunk
>Of Coal", while she grabs a long neck sits on the steps, and the credits
>start rolling.
>
>I don't care who you are, that there's symbolic, good ol' boy heaven! :)
Heh, heh, heh. I'll have to order it.
--
Progress is the product of human agency. Things get better because we
make them better. Things go wrong when we get too comfortable, when we
fail to take risks or seize opportunities.
-- Susan Rice
In article <[email protected]>, Rita and
Neil Ward <[email protected]> wrote:
> Fake, or something useful...
>
> <http://www.youtube.com/watch?v=ZboxMsSz5Aw>
I have a Makerbot Thing-o-Matic. Very real. I'm building a 3D scanner,
so I will soon have a 3D photocopy system...
In article <[email protected]>, Swingman
<[email protected]> wrote:
> On 7/9/2011 10:18 PM, Leon wrote:
>
> > Well actually and as you pointed out, nothing was common about that
> >set up.
>
> Powdered egg and sausage in print cartridges and you can order breakfast
> over the Internet.
>
> Or a, fully working, model of Ashley Judd, maybe?
I just bought an add-on to my 3D printer that will allow printing in
fondant or royal icing (wedding cake toppers?), peanut butter, liver
sausage (doggie birthday cakes) or any paste that can be extruded...
In article
<93dd7891-9ec4-454f-a0a7-083504670f38@d14g2000yqb.googlegroups.com>,
Robatoy <[email protected]> wrote:
> On Jul 12, 12:49 am, Dave Balderstone
> <dave@N_O_T_T_H_I_Sbalderstone.ca> wrote:
> > In article <[email protected]>, Rita and
> >
> > Neil Ward <[email protected]> wrote:
> > > Fake, or something useful...
> >
> > > <http://www.youtube.com/watch?v=ZboxMsSz5Aw>
> >
> > I have a Makerbot Thing-o-Matic. Very real. I'm building a 3D scanner,
> > so I will soon have a 3D photocopy system...
>
> What file format will you be able to export? How big an object will
> you be able to scan?
For the printer, export as .stl, and then the printer s/w converts to
gcode for output. I'm not about other formats at this point, as I'm
still acquiring the pieces I need and haven't looked at the software
(Meshlab).
According to the documentation "Meshlab is capable of exporting the
watertight mesh into a variety of file formats such as .STL, .OBJ,
.PLY, .3DS and .U3D among others. This makes it a great tool for
converting your mesh into a format that can be imported into a 3D
modeling program such as 3D Studio Max, Silo 3D, Blender or to
integrate your file into .PDF file using Adobe Acrobat 9."
As for size I think "that depends". I've seen sample scans of people's
heads, and from the waist up.
The kit I'm playing with is "experimental".
You can follow the links from here
<http://store.makerbot.com/makerbot-3d-scanner.html> if you weant to
poke around and see what other folks have been doing with it.
On 7/9/2011 10:18 PM, Leon wrote:
> Well actually and as you pointed out, nothing was common about that
>set up.
Powdered egg and sausage in print cartridges and you can order breakfast
over the Internet.
Or a, fully working, model of Ashley Judd, maybe?
--
www.e-woodshop.net
Last update: 4/15/2010
KarlC@ (the obvious)
On Sat, 09 Jul 2011 09:44:27 -0400, Rita and Neil Ward
<[email protected]> wrote:
>Fake, or something useful...
>
><http://www.youtube.com/watch?v=ZboxMsSz5Aw>
So what am I? Chopped liver?
On Jul 10, 6:47=A0am, Swingman <[email protected]> wrote:
> On 7/9/2011 10:18 PM, Leon wrote:
>
> =A0> Well actually and as you pointed out, nothing was common about that
> =A0>set up.
>
> Powdered egg and sausage in print cartridges and you can order breakfast
> over the Internet.
>
> Or a, fully working, model of Ashley Judd, maybe?
>
Okay... I'll bite... where would the sausage go?
Leon wrote:
> On 7/9/2011 10:44 AM, k-nuttle wrote:
>> On 7/9/2011 10:54 AM, Ed Pawlowski wrote:
>>>
>>> "Rita and Neil Ward"<[email protected]> wrote in message
>>> news:[email protected]...
>>>> Fake, or something useful...
>>>>
>>>> <http://www.youtube.com/watch?v=ZboxMsSz5Aw>
>>>
>>> The "printing" of solid objects has been around for a while. This seems
>>> to be many levels above though. While it seems impossible to do, so was
>>> the box that sits in your living room with the guy inside entertaining
>>> you.
>> As said they have been around for a while, however remember these are
>> not working units. While the wrench looked like the real thing, it was
>> only a non working model.
>
> Did you not see him adjust the wrench and tighten a nut with it???
No common scanner will show the axle on which the adjuster turns.
Industrial x-ray will.
Maybe they touched up the scan to show the hidden parts before feeding
it to the printer.
If so they glossed over this.
--
Gerald Ross
Cochran, GA
One picture had *better* be worth a
thousand words -- it takes up a lot
more disk space.
On Jul 10, 12:50=A0pm, Swingman <[email protected]> wrote:
> On 7/10/2011 11:20 AM, Robatoy wrote:
>
> > On Jul 10, 6:47 am, Swingman<[email protected]> =A0wrote:
> >> On 7/9/2011 10:18 PM, Leon wrote:
>
> >> =A0 > =A0Well actually and as you pointed out, nothing was common abou=
t that
> >> =A0 >set up.
>
> >> Powdered egg and sausage in print cartridges and you can order breakfa=
st
> >> over the Internet.
>
> >> Or a, fully working, model of Ashley Judd, maybe?
>
> > Okay... I'll bite... where would the sausage go?
>
> In the general vicinity of where you'd be biting ... just follow your
> chin, or nose depending upon your orientation.
>
LOL!
On Jul 12, 12:49=A0am, Dave Balderstone
<dave@N_O_T_T_H_I_Sbalderstone.ca> wrote:
> In article <[email protected]>, Rita and
>
> Neil Ward <[email protected]> wrote:
> > Fake, or something useful...
>
> > <http://www.youtube.com/watch?v=3DZboxMsSz5Aw>
>
> I have a Makerbot Thing-o-Matic. Very real. =A0I'm building a 3D scanner,
> so I will soon have a 3D photocopy system...
What file format will you be able to export? How big an object will
you be able to scan?
On Sat, 09 Jul 2011 17:43:10 -0700, Zz Yzx <[email protected]>
wrote:
>On Sat, 09 Jul 2011 09:44:27 -0400, Rita and Neil Ward
><[email protected]> wrote:
>
>>Fake, or something useful...
>>
>><http://www.youtube.com/watch?v=ZboxMsSz5Aw>
>
>So what am I? Chopped liver?
http://www.youtube.com/watch?v=umefYctSPS0 <giggle>
--
One word frees us of all the weight and pain of life: That word is love.
-- Sophocles
On 7/9/2011 3:32 PM, Gerald Ross wrote:
> Leon wrote:
>> On 7/9/2011 10:44 AM, k-nuttle wrote:
>>> On 7/9/2011 10:54 AM, Ed Pawlowski wrote:
>>>>
>>>> "Rita and Neil Ward"<[email protected]> wrote in message
>>>> news:[email protected]...
>>>>> Fake, or something useful...
>>>>>
>>>>> <http://www.youtube.com/watch?v=ZboxMsSz5Aw>
>>>>
>>>> The "printing" of solid objects has been around for a while. This seems
>>>> to be many levels above though. While it seems impossible to do, so was
>>>> the box that sits in your living room with the guy inside entertaining
>>>> you.
>>> As said they have been around for a while, however remember these are
>>> not working units. While the wrench looked like the real thing, it was
>>> only a non working model.
>>
>> Did you not see him adjust the wrench and tighten a nut with it???
>
> No common scanner will show the axle on which the adjuster turns.
> Industrial x-ray will.
> Maybe they touched up the scan to show the hidden parts before feeding
> it to the printer.
> If so they glossed over this.
Well actually and as you pointed out, nothing was common about that set up.
On 7/10/2011 11:20 AM, Robatoy wrote:
> On Jul 10, 6:47 am, Swingman<[email protected]> wrote:
>> On 7/9/2011 10:18 PM, Leon wrote:
>>
>> > Well actually and as you pointed out, nothing was common about that
>> >set up.
>>
>> Powdered egg and sausage in print cartridges and you can order breakfast
>> over the Internet.
>>
>> Or a, fully working, model of Ashley Judd, maybe?
>>
>
>
> Okay... I'll bite... where would the sausage go?
In the general vicinity of where you'd be biting ... just follow your
chin, or nose depending upon your orientation.
--
www.e-woodshop.net
Last update: 4/15/2010
KarlC@ (the obvious)
On 7/9/2011 6:38 PM, Larry Jaques wrote:
> On Sat, 09 Jul 2011 18:12:46 -0400, Rita and Neil Ward
> <[email protected]> wrote:
>
>> On 7/9/2011 4:32 PM, Gerald Ross wrote:
>>> Leon wrote:
>>>> On 7/9/2011 10:44 AM, k-nuttle wrote:
>>>>> On 7/9/2011 10:54 AM, Ed Pawlowski wrote:
>>>>>>
>>>>>> "Rita and Neil Ward"<[email protected]> wrote in message
>>>>>> news:[email protected]...
>>>>>>> Fake, or something useful...
>>>>>>>
>>>>>>> <http://www.youtube.com/watch?v=ZboxMsSz5Aw>
>>>>>>
>>>>>> The "printing" of solid objects has been around for a while. This seems
>>>>>> to be many levels above though. While it seems impossible to do, so was
>>>>>> the box that sits in your living room with the guy inside entertaining
>>>>>> you.
>>>>> As said they have been around for a while, however remember these are
>>>>> not working units. While the wrench looked like the real thing, it was
>>>>> only a non working model.
>>>>
>>>> Did you not see him adjust the wrench and tighten a nut with it???
>>>
>>> No common scanner will show the axle on which the adjuster turns.
>>> Industrial x-ray will.
>>> Maybe they touched up the scan to show the hidden parts before feeding
>>> it to the printer.
>>> If so they glossed over this.
>>
>> Leon, did you notice the differences in the wrench scanned and the one
>> printed?
>>
>> This one of a wooden statue is a more believable:
>> <http://www.youtube.com/watch?v=07QxFQ3uUFw&NR=1>
>
> Jay Leno has a 3-D printer and loves it.
> http://www.youtube.com/watch?v=ggvzcGdZsTc
> Scan, print, and cast from the printed article. Cool.
>
> --
> One word frees us of all the weight and pain of life: That word is love.
> -- Sophocles
After viewing Jay Leno's video, 3D scanning would be something useful.
Check out http://www.nextengine.com/. Cool indeed!
On 7/9/2011 4:32 PM, Gerald Ross wrote:
> Leon wrote:
>> On 7/9/2011 10:44 AM, k-nuttle wrote:
>>> On 7/9/2011 10:54 AM, Ed Pawlowski wrote:
>>>>
>>>> "Rita and Neil Ward"<[email protected]> wrote in message
>>>> news:[email protected]...
>>>>> Fake, or something useful...
>>>>>
>>>>> <http://www.youtube.com/watch?v=ZboxMsSz5Aw>
>>>>
>>>> The "printing" of solid objects has been around for a while. This seems
>>>> to be many levels above though. While it seems impossible to do, so was
>>>> the box that sits in your living room with the guy inside entertaining
>>>> you.
>>> As said they have been around for a while, however remember these are
>>> not working units. While the wrench looked like the real thing, it was
>>> only a non working model.
>>
>> Did you not see him adjust the wrench and tighten a nut with it???
>
> No common scanner will show the axle on which the adjuster turns.
> Industrial x-ray will.
> Maybe they touched up the scan to show the hidden parts before feeding
> it to the printer.
> If so they glossed over this.
Leon, did you notice the differences in the wrench scanned and the one
printed?
This one of a wooden statue is a more believable:
<http://www.youtube.com/watch?v=07QxFQ3uUFw&NR=1>
On 7/10/2011 8:24 AM, Larry Jaques wrote:
> On Sun, 10 Jul 2011 05:47:31 -0500, Swingman<[email protected]> wrote:
>> Or a, fully working, model of Ashley Judd, maybe?
>
> Ooh! Ooh! Ooh! She's one of my favorite women of all time. I fell in
> lust with her after seeing her first flick, _Ruby in Paradise_.
"Come Early Morning" ... carrying that jukebox in the back of her pickup
until she finally gets it in the double wide in the last scene, drops in
a coin and Billy Joe Shaver starts cranking out "I'm Just An Old Chunk
Of Coal", while she grabs a long neck sits on the steps, and the credits
start rolling.
I don't care who you are, that there's symbolic, good ol' boy heaven! :)
--
www.e-woodshop.net
Last update: 4/15/2010
KarlC@ (the obvious)
On Sat, 09 Jul 2011 18:12:46 -0400, Rita and Neil Ward
<[email protected]> wrote:
>On 7/9/2011 4:32 PM, Gerald Ross wrote:
>> Leon wrote:
>>> On 7/9/2011 10:44 AM, k-nuttle wrote:
>>>> On 7/9/2011 10:54 AM, Ed Pawlowski wrote:
>>>>>
>>>>> "Rita and Neil Ward"<[email protected]> wrote in message
>>>>> news:[email protected]...
>>>>>> Fake, or something useful...
>>>>>>
>>>>>> <http://www.youtube.com/watch?v=ZboxMsSz5Aw>
>>>>>
>>>>> The "printing" of solid objects has been around for a while. This seems
>>>>> to be many levels above though. While it seems impossible to do, so was
>>>>> the box that sits in your living room with the guy inside entertaining
>>>>> you.
>>>> As said they have been around for a while, however remember these are
>>>> not working units. While the wrench looked like the real thing, it was
>>>> only a non working model.
>>>
>>> Did you not see him adjust the wrench and tighten a nut with it???
>>
>> No common scanner will show the axle on which the adjuster turns.
>> Industrial x-ray will.
>> Maybe they touched up the scan to show the hidden parts before feeding
>> it to the printer.
>> If so they glossed over this.
>
>Leon, did you notice the differences in the wrench scanned and the one
>printed?
>
>This one of a wooden statue is a more believable:
><http://www.youtube.com/watch?v=07QxFQ3uUFw&NR=1>
Jay Leno has a 3-D printer and loves it.
http://www.youtube.com/watch?v=ggvzcGdZsTc
Scan, print, and cast from the printed article. Cool.
--
One word frees us of all the weight and pain of life: That word is love.
-- Sophocles
On Tue, 12 Jul 2011 05:54:13 -0500, Swingman <[email protected]> wrote:
>On 7/11/2011 11:52 PM, Dave Balderstone wrote:
>> In article<[email protected]>, Swingman
>> <[email protected]> wrote:
>>
>>> On 7/9/2011 10:18 PM, Leon wrote:
>>>
>>> > Well actually and as you pointed out, nothing was common about that
>>> >set up.
>>>
>>> Powdered egg and sausage in print cartridges and you can order breakfast
>>> over the Internet.
>>>
>>> Or a, fully working, model of Ashley Judd, maybe?
>>
>> I just bought an add-on to my 3D printer that will allow printing in
>> fondant or royal icing (wedding cake toppers?), peanut butter, liver
>> sausage (doggie birthday cakes) or any paste that can be extruded...
>
>I fantasized, and had a recurring dream, as a six year old in 1949, that
Crikey, yer ancient! ('53 vintage here)
>one day I would own a book that had all the books in the world on it and
>I could read it without turning pages.
>
>The eBook is now a common item.
And don't you love it? I love it when science fiction and fantasy come
to life. I'm extremely impatient waiting for my Mr. Fusion-powered
DeLorean, though.
>Over 40 years ago, when first introduced to digital computers, I
>fantasized that one day I could digitize all my prized "stuff" and store
>them on a computer, instead of on a shelf.
>
>Seems like that is also coming to pass ...
See above.
>It's great to be around to see these dreams/fantasy's come true.
Like dating the Felker (names changed to protect the innocent) -twins-
together one night during my 15th year. <sated but clothed sigh>
>ITMT,think I'll keep fantasizing/dreaming.
>
>Ashely Judd, I'm waiting ... ;)
She and Diane Lane (the younger) are just the dreamiest, aren't they?
(If only Di had nips...)
--
Win first, Fight later.
--martial principle of the Samurai
On 7/9/2011 10:44 AM, k-nuttle wrote:
> On 7/9/2011 10:54 AM, Ed Pawlowski wrote:
>>
>> "Rita and Neil Ward" <[email protected]> wrote in message
>> news:[email protected]...
>>> Fake, or something useful...
>>>
>>> <http://www.youtube.com/watch?v=ZboxMsSz5Aw>
>>
>> The "printing" of solid objects has been around for a while. This seems
>> to be many levels above though. While it seems impossible to do, so was
>> the box that sits in your living room with the guy inside entertaining
>> you.
> As said they have been around for a while, however remember these are
> not working units. While the wrench looked like the real thing, it was
> only a non working model.
Did you not see him adjust the wrench and tighten a nut with it???
On 7/9/2011 10:54 AM, Ed Pawlowski wrote:
>
> "Rita and Neil Ward" <[email protected]> wrote in message
> news:[email protected]...
>> Fake, or something useful...
>>
>> <http://www.youtube.com/watch?v=ZboxMsSz5Aw>
>
> The "printing" of solid objects has been around for a while. This seems
> to be many levels above though. While it seems impossible to do, so was
> the box that sits in your living room with the guy inside entertaining you.
As said they have been around for a while, however remember these are
not working units. While the wrench looked like the real thing, it was
only a non working model.
"Rita and Neil Ward" wrote in message
news:[email protected]...
On 7/9/2011 6:38 PM, Larry Jaques wrote:
> On Sat, 09 Jul 2011 18:12:46 -0400, Rita and Neil Ward
> <[email protected]> wrote:
>
>> On 7/9/2011 4:32 PM, Gerald Ross wrote:
>>> Leon wrote:
>>>> On 7/9/2011 10:44 AM, k-nuttle wrote:
>>>>> On 7/9/2011 10:54 AM, Ed Pawlowski wrote:
>>>>>>
>>>>>> "Rita and Neil Ward"<[email protected]> wrote in message
>>>>>> news:[email protected]...
>>>>>>> Fake, or something useful...
>>>>>>>
>>>>>>> <http://www.youtube.com/watch?v=ZboxMsSz5Aw>
>>>>>>
>>>>>> The "printing" of solid objects has been around for a while. This
>>>>>> seems
>>>>>> to be many levels above though. While it seems impossible to do, so
>>>>>> was
>>>>>> the box that sits in your living room with the guy inside
>>>>>> entertaining
>>>>>> you.
>>>>> As said they have been around for a while, however remember these are
>>>>> not working units. While the wrench looked like the real thing, it was
>>>>> only a non working model.
>>>>
>>>> Did you not see him adjust the wrench and tighten a nut with it???
>>>
>>> No common scanner will show the axle on which the adjuster turns.
>>> Industrial x-ray will.
>>> Maybe they touched up the scan to show the hidden parts before feeding
>>> it to the printer.
>>> If so they glossed over this.
>>
>> Leon, did you notice the differences in the wrench scanned and the one
>> printed?
>>
>> This one of a wooden statue is a more believable:
>> <http://www.youtube.com/watch?v=07QxFQ3uUFw&NR=1>
>
> Jay Leno has a 3-D printer and loves it.
> http://www.youtube.com/watch?v=ggvzcGdZsTc
> Scan, print, and cast from the printed article. Cool.
>
> --
> One word frees us of all the weight and pain of life: That word is love.
> -- Sophocles
After viewing Jay Leno's video, 3D scanning would be something useful.
Check out http://www.nextengine.com/. Cool indeed!
==========
Here comes the porno industry with that one!
Modelling clay becomes obsolete. Viagra usage will be down.
--
Eric
Larry Jaques wrote:
> On Sun, 10 Jul 2011 05:47:31 -0500, Swingman <[email protected]> wrote:
>
>>On 7/9/2011 10:18 PM, Leon wrote:
>>
>> > Well actually and as you pointed out, nothing was common about that
>> >set up.
>>
>>Powdered egg and sausage in print cartridges and you can order breakfast
>>over the Internet.
>>
>>Or a, fully working, model of Ashley Judd, maybe?
>
> Ooh! Ooh! Ooh! She's one of my favorite women of all time. I fell in
> lust with her after seeing her first flick, _Ruby in Paradise_.
>
> Dunno 'bout a working plastic model of her, though...
> Maybe Real Doll can clone her...
> http://www.scribd.com/doc/80982/The-Real-Doll
> (x-rated, don't view this at work unless your boss is a perv, too)
> <snicker>
>
> --
> One word frees us of all the weight and pain of life: That word is love.
> -- Sophocles
And I could use her in the Car Pool Lane too. Nice!!!
--
"You can lead them to LINUX
but you can't make them THINK"
Man. 2010.1 Spring
KDE4.4
2.6.33.5-desktop-2mnb
"Rich" wrote in message news:[email protected]...
Larry Jaques wrote:
> On Sun, 10 Jul 2011 05:47:31 -0500, Swingman <[email protected]> wrote:
>
>>On 7/9/2011 10:18 PM, Leon wrote:
>>
>> > Well actually and as you pointed out, nothing was common about that
>> >set up.
>>
>>Powdered egg and sausage in print cartridges and you can order breakfast
>>over the Internet.
>>
>>Or a, fully working, model of Ashley Judd, maybe?
>
> Ooh! Ooh! Ooh! She's one of my favorite women of all time. I fell in
> lust with her after seeing her first flick, _Ruby in Paradise_.
>
> Dunno 'bout a working plastic model of her, though...
> Maybe Real Doll can clone her...
> http://www.scribd.com/doc/80982/The-Real-Doll
> (x-rated, don't view this at work unless your boss is a perv, too)
> <snicker>
>
> --
> One word frees us of all the weight and pain of life: That word is love.
> -- Sophocles
And I could use her in the Car Pool Lane too. Nice!!!
=============
GEEEEEZZZZZ!! Pull over and park the vehicle first!
It's much safer when the vehicle isn't moving!!
--
Eric
In article <[email protected]>,
Larry Jaques <[email protected]> wrote:
>
>Jay Leno has a 3-D printer and loves it.
>http://www.youtube.com/watch?v=ggvzcGdZsTc
>Scan, print, and cast from the printed article. Cool.
I love the 21st century.
This is the one that blows me away: 3d printers that print
in collegen. You print a human organ, seed it with stem cells,
and bake for a couple of weeks.
http://blog.ted.com/2011/03/07/printing-a-human-kidney-anthony-atala-on-ted-com/
The part at the end where he puts on a rubber glove, reaches into a
jar, pulls out this blob and says "this is a human kidney; we printed
it back stage this morning" truly blew me away.
--
-Ed Falk, [email protected]
http://thespamdiaries.blogspot.com/
On Sun, 10 Jul 2011 05:47:31 -0500, Swingman <[email protected]> wrote:
>On 7/9/2011 10:18 PM, Leon wrote:
>
> > Well actually and as you pointed out, nothing was common about that
> >set up.
>
>Powdered egg and sausage in print cartridges and you can order breakfast
>over the Internet.
>
>Or a, fully working, model of Ashley Judd, maybe?
Ooh! Ooh! Ooh! She's one of my favorite women of all time. I fell in
lust with her after seeing her first flick, _Ruby in Paradise_.
Dunno 'bout a working plastic model of her, though...
Maybe Real Doll can clone her...
http://www.scribd.com/doc/80982/The-Real-Doll
(x-rated, don't view this at work unless your boss is a perv, too)
<snicker>
--
One word frees us of all the weight and pain of life: That word is love.
-- Sophocles
On Sat, 09 Jul 2011 09:44:27 -0400, Rita and Neil Ward
<[email protected]> wrote:
>Fake, or something useful...
>
><http://www.youtube.com/watch?v=ZboxMsSz5Aw>
http://reprap.org/wiki/Main_Page has designs for hobbyists that will
print copies of itself (or most of it), among other things.
"Rita and Neil Ward" <[email protected]> wrote in message
news:[email protected]...
> Fake, or something useful...
>
> <http://www.youtube.com/watch?v=ZboxMsSz5Aw>
The "printing" of solid objects has been around for a while. This seems to
be many levels above though. While it seems impossible to do, so was the
box that sits in your living room with the guy inside entertaining you.
On 7/11/2011 11:52 PM, Dave Balderstone wrote:
> In article<[email protected]>, Swingman
> <[email protected]> wrote:
>
>> On 7/9/2011 10:18 PM, Leon wrote:
>>
>> > Well actually and as you pointed out, nothing was common about that
>> >set up.
>>
>> Powdered egg and sausage in print cartridges and you can order breakfast
>> over the Internet.
>>
>> Or a, fully working, model of Ashley Judd, maybe?
>
> I just bought an add-on to my 3D printer that will allow printing in
> fondant or royal icing (wedding cake toppers?), peanut butter, liver
> sausage (doggie birthday cakes) or any paste that can be extruded...
I fantasized, and had a recurring dream, as a six year old in 1949, that
one day I would own a book that had all the books in the world on it and
I could read it without turning pages.
The eBook is now a common item.
Over 40 years ago, when first introduced to digital computers, I
fantasized that one day I could digitize all my prized "stuff" and store
them on a computer, instead of on a shelf.
Seems like that is also coming to pass ...
It's great to be around to see these dreams/fantasy's come true.
ITMT,think I'll keep fantasizing/dreaming.
Ashely Judd, I'm waiting ... ;)
--
www.e-woodshop.net
Last update: 4/15/2010
KarlC@ (the obvious)