Has anyone user the cabinet door router 6 bit set from Woodline USA.
I need a set for a some kitchen cabinets and I'm not ready to spend a couple
hundred $$
on router bits, from CMT or Freud, yet...
Will these make good clean cuts in 3/4 red oak and poplar?
I'm mainly concerned about the rail & stile pair and the drawer lock bits.
Their 6-bit set is advertised for $119.
ThankX
Ron
I have ONE set of woodline bits. they are the CRAPPIEST bits I've ever
run across. I bought a set of 6 or 7 dado bits. they do not cut well
and they leave more tear out than my other bits, including CMT's and
Bosch. DO NOT BUY THAT BRAND! My CMT raised panel set is fabulous. I
just picked up their glass panel bit set as well. Get anything but
Woodline. If you don't believe me, you will if you get them!
dave
Ron wrote:
> Has anyone user the cabinet door router 6 bit set from Woodline USA.
>
> I need a set for a some kitchen cabinets and I'm not ready to spend a couple
> hundred $$
> on router bits, from CMT or Freud, yet...
>
> Will these make good clean cuts in 3/4 red oak and poplar?
>
> I'm mainly concerned about the rail & stile pair and the drawer lock bits.
> Their 6-bit set is advertised for $119.
>
> ThankX
> Ron
>
>
well, they sound cheap...Tom
>Subject: Re: Woodline router bits
>From: Bay Area Dave [email protected]
>Date: 11/13/2003 6:50 PM US Mountain Standard Time
>Message-id: <[email protected]>
>
>I have ONE set of woodline bits. they are the CRAPPIEST bits I've ever
>run across. I bought a set of 6 or 7 dado bits. they do not cut well
>and they leave more tear out than my other bits, including CMT's and
>Bosch. DO NOT BUY THAT BRAND! My CMT raised panel set is fabulous. I
>just picked up their glass panel bit set as well. Get anything but
>Woodline. If you don't believe me, you will if you get them!
>
>
>dave
>
>Ron wrote:
>
>> Has anyone user the cabinet door router 6 bit set from Woodline USA.
>>
>> I need a set for a some kitchen cabinets and I'm not ready to spend a
>couple
>> hundred $$
>> on router bits, from CMT or Freud, yet...
>>
>> Will these make good clean cuts in 3/4 red oak and poplar?
>>
>> I'm mainly concerned about the rail & stile pair and the drawer lock bits.
>> Their 6-bit set is advertised for $119.
>>
>> ThankX
>> Ron
>>
Someday, it'll all be over....