I just discovered, at least for me, a very minor improvement to the Scary
Sharp method of sharpening iron. I've been using sandpaper to sharpen
cutting edges for about 25 years, although not to 2,000 grit and not using
plate glass. In just the last year I started using a piece of glass.
Anyway, at work the other day I was looking for something from the supply
cabinet and I ran across a new office gadget. It's sorta like a tape
dispenser, but it dispenses a 1/4" wide strip of glue like the glue on
Post-It notes. I immediately thought of using it on the sandpaper rather
than spray adhesive which I always seem to get on me while spraying the
sandpaper. I bought one at Office Max and I just tried it and it works
great. Run a little strip in the corner of the sandpaper and a short X in
the middle and it sticks nicely to the glass. Just like Post-It notes the
sandpaper is easily removable and can be restuck to the glass if needed.
It's less messy than spray adhesive in my opinion.
--
Larry C in Auburn, WA
In article <lHjrb.110091$9E1.545491@attbi_s52>, Larry C in Auburn, WA
<[email protected]> wrote:
> Here's a link to a picture/description of it:
>
> http://www.aboveroute.com/item/-Papermate-Dryline-Adhesive-Dispenser-and-Refil
> ls/i34962.htm
> I don't have the receipt, but I think it was around $6.
How thick is it? No bumps or lumps, even with the finest grits?
The mess of cleaning up 3M 77 keeps me from doing SS as often as I
should. This stuff definitely looks promising.
Thanks for finding it!
Kevin
Larry C writes:
>I just discovered, at least for me, a very minor improvement to the Scary
>Sharp method of sharpening iron. I've been using sandpaper to sharpen
>cutting edges for about 25 years, although not to 2,000 grit and not using
>plate glass. In just the last year I started using a piece of glass.
>Anyway, at work the other day I was looking for something from the supply
>cabinet and I ran across a new office gadget. It's sorta like a tape
>dispenser, but it dispenses a 1/4" wide strip of glue like the glue on
>Post-It notes. I immediately thought of using it on the sandpaper rather
>than spray adhesive which I always seem to get on me while spraying the
>sandpaper. I bought one at Office Max and I just tried it and it works
>great. Run a little strip in the corner of the sandpaper and a short X in
>the middle and it sticks nicely to the glass. Just like Post-It notes the
>sandpaper is easily removable and can be restuck to the glass if needed.
>It's less messy than spray adhesive in my opinion.
Most anything is. Suggest you take a look at Lee Valley's microabrasives, with
PSA. Too, McFeely's has a neat system using rolled PSA abrasives with MDF.
Charlie Self
"I think there is a world market for maybe five computers."
Thomas J. Watson
I suspect that rubbing lines of bees wax on the back of the
sand paper will work as well. One of my mentors was a jeweler
and used an old drop forge to stamp parts. The male and female
dies (sp?) have to be perfectly aligned or they explode when
the drop forge hammer drops - not a good thing. Had a small die
set (male & female matched dies) that we just couldn't get
aligned in any of his die holders. We went nuts trying to come
up with a method.
Then an old drop forge operator we found showed us The Trick.
The male die was clamped in its holder. But the female die
just got a little bees wax on the bottom and stuck on the
anvil - close but not perfectly aligned with the male die.
The old guy put a piece of linoleum over the female die and
let the hammer fall. The female die was able to move just
enough to be perfectly aligned with the male die.
Stamped a lot of Hitler In A Hangman's Noose overlays for
Zippo lighters using The Trick. We used that trick for the
Tojo In A Hangman's Noose overlays as well. I guess
Mussoline didn't warrant an overlay.
BTW -this was done in the '70s and not during The War (as
opposed to "police actions", "incursions", "temporary
invasions", "shadow wars", "contras" or other "actions").
I'm old, but not that old ;)
Anyway - try the bees wax trick before spending $19.95
plus shipping, handling, undercoating, floor mats,'
taxes, licensing fees etc.. PLUS the refill costs.
charlie b
???WTF are you talking about? "$20 plus shipping, handling, undercoating,
floor mats, taxes, licensing fees etc.. PLUS the refill costs." $6 at the
local store, probably $10 if you had to have it shipped. There's enough
glue on the thing to last a lifetime. Beeswax might work, but this glue
thingy doesn't cost $20.
--
Larry C in Auburn, WA
"charlie b" <[email protected]> wrote in message
news:[email protected]...
> I suspect that rubbing lines of bees wax on the back of the
> sand paper will work as well. One of my mentors was a jeweler
> and used an old drop forge to stamp parts. The male and female
> dies (sp?) have to be perfectly aligned or they explode when
> the drop forge hammer drops - not a good thing. Had a small die
> set (male & female matched dies) that we just couldn't get
> aligned in any of his die holders. We went nuts trying to come
> up with a method.
>
> Then an old drop forge operator we found showed us The Trick.
> The male die was clamped in its holder. But the female die
> just got a little bees wax on the bottom and stuck on the
> anvil - close but not perfectly aligned with the male die.
> The old guy put a piece of linoleum over the female die and
> let the hammer fall. The female die was able to move just
> enough to be perfectly aligned with the male die.
>
> Stamped a lot of Hitler In A Hangman's Noose overlays for
> Zippo lighters using The Trick. We used that trick for the
> Tojo In A Hangman's Noose overlays as well. I guess
> Mussoline didn't warrant an overlay.
>
> BTW -this was done in the '70s and not during The War (as
> opposed to "police actions", "incursions", "temporary
> invasions", "shadow wars", "contras" or other "actions").
> I'm old, but not that old ;)
>
> Anyway - try the bees wax trick before spending $19.95
> plus shipping, handling, undercoating, floor mats,'
> taxes, licensing fees etc.. PLUS the refill costs.
>
> charlie b
What is the name of the stuff and where can you get it?
"Larry C in Auburn, WA" <[email protected]> wrote in message
news:N_8rb.107049$ao4.322703@attbi_s51...
> I just discovered, at least for me, a very minor improvement to the Scary
> Sharp method of sharpening iron. I've been using sandpaper to sharpen
> cutting edges for about 25 years, although not to 2,000 grit and not using
> plate glass. In just the last year I started using a piece of glass.
> Anyway, at work the other day I was looking for something from the supply
> cabinet and I ran across a new office gadget. It's sorta like a tape
> dispenser, but it dispenses a 1/4" wide strip of glue like the glue on
> Post-It notes. I immediately thought of using it on the sandpaper rather
> than spray adhesive which I always seem to get on me while spraying the
> sandpaper. I bought one at Office Max and I just tried it and it works
> great. Run a little strip in the corner of the sandpaper and a short X in
> the middle and it sticks nicely to the glass. Just like Post-It notes the
> sandpaper is easily removable and can be restuck to the glass if needed.
> It's less messy than spray adhesive in my opinion.
> --
> Larry C in Auburn, WA
>
>
My wife uses this adhesive for scrapbooking. It doesn't last forever.
In ScarySharp use alone, it would last a long time though.
When she first showed me the stuff, I was wondering how it would work
for ScarySharp. I don't like the thickness of the rectangles. As
another poster asked, I do believe it would transfer through the
sandpaper as a soft bump.
As far as cost goes, $6 for the initial purchas, then about $4 for
refills. Pretty rough, but ScarySharp won't consume much of it. Just
don't let SWMBO know you got some of it!
-Mike
"Larry C in Auburn, WA" <[email protected]> wrote in message news:<KFCrb.116792$ao4.358836@attbi_s51>...
> ???WTF are you talking about? "$20 plus shipping, handling, undercoating,
> floor mats, taxes, licensing fees etc.. PLUS the refill costs." $6 at the
> local store, probably $10 if you had to have it shipped. There's enough
> glue on the thing to last a lifetime. Beeswax might work, but this glue
> thingy doesn't cost $20.
> --
> Larry C in Auburn, WA
>
>
> "charlie b" <[email protected]> wrote in message
> news:[email protected]...
> > I suspect that rubbing lines of bees wax on the back of the
> > sand paper will work as well. One of my mentors was a jeweler
> > and used an old drop forge to stamp parts. The male and female
> > dies (sp?) have to be perfectly aligned or they explode when
> > the drop forge hammer drops - not a good thing. Had a small die
> > set (male & female matched dies) that we just couldn't get
> > aligned in any of his die holders. We went nuts trying to come
> > up with a method.
> >
> > Then an old drop forge operator we found showed us The Trick.
> > The male die was clamped in its holder. But the female die
> > just got a little bees wax on the bottom and stuck on the
> > anvil - close but not perfectly aligned with the male die.
> > The old guy put a piece of linoleum over the female die and
> > let the hammer fall. The female die was able to move just
> > enough to be perfectly aligned with the male die.
> >
> > Stamped a lot of Hitler In A Hangman's Noose overlays for
> > Zippo lighters using The Trick. We used that trick for the
> > Tojo In A Hangman's Noose overlays as well. I guess
> > Mussoline didn't warrant an overlay.
> >
> > BTW -this was done in the '70s and not during The War (as
> > opposed to "police actions", "incursions", "temporary
> > invasions", "shadow wars", "contras" or other "actions").
> > I'm old, but not that old ;)
> >
> > Anyway - try the bees wax trick before spending $19.95
> > plus shipping, handling, undercoating, floor mats,'
> > taxes, licensing fees etc.. PLUS the refill costs.
> >
> > charlie b
Here's a link to a picture/description of it:
http://www.aboveroute.com/item/-Papermate-Dryline-Adhesive-Dispenser-and-Refills/i34962.htm
I don't have the receipt, but I think it was around $6.
--
Larry C in Auburn, WA
"Silvan" <[email protected]> wrote in message
news:[email protected]...
> Larry C in Auburn, WA wrote:
>
> > sandpaper. I bought one at Office Max and I just tried it and it works
> > great. Run a little strip in the corner of the sandpaper and a short X
in
>
> What's it called exactly? How expensive was it?
>
> Might be worth checking out indeed. I'm clamping my paper because I hate
> screwing with the adhesive, and I'm almost as tired of screwing with the
> clamps.
>
> --
> Michael McIntyre ---- Silvan <[email protected]>
> Linux fanatic, and certified Geek; registered Linux user #243621
> http://www.geocities.com/Paris/Rue/5407/
>
Larry C in Auburn, WA wrote:
> sandpaper. I bought one at Office Max and I just tried it and it works
> great. Run a little strip in the corner of the sandpaper and a short X in
What's it called exactly? How expensive was it?
Might be worth checking out indeed. I'm clamping my paper because I hate
screwing with the adhesive, and I'm almost as tired of screwing with the
clamps.
--
Michael McIntyre ---- Silvan <[email protected]>
Linux fanatic, and certified Geek; registered Linux user #243621
http://www.geocities.com/Paris/Rue/5407/