The other day on Wood Works, David Marks made a bar stool with
laminated mortise-and-tenon joinery. Your table top could be sliced up
and the legs built right into it as shown in figures D and E on the
following web page:
http://www.diynet.com/diy/ww_chairs_stools_benches/article/0,2049,DIY_14439_2274730,00.html
http://tinyurl.com/5xecl
This could also give an interesting effect because the legs would show
on the top of the table as through-tenons.
Patrick Fitzgerald -- http://www.barelyfitz.com/wood